lkml.org 
[lkml]   [2018]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 4/6] mfd: lochnagar: Add support for the Cirrus Logic Lochnagar
On Thu, 08 Nov 2018, Charles Keepax wrote:

> Lochnagar is an evaluation and development board for Cirrus
> Logic Smart CODEC and Amp devices. It allows the connection of
> most Cirrus Logic devices on mini-cards, as well as allowing
> connection of various application processor systems to provide a
> full evaluation platform. This driver supports the board
> controller chip on the Lochnagar board. Audio system topology,
> clocking and power can all be controlled through the Lochnagar
> controller chip, allowing the device under test to be used in
> a variety of possible use cases.
>
> As the Lochnagar is a fairly complex device this MFD driver
> allows the drivers for the various features to be bound
> in. Initially clocking, regulator and pinctrl will be added as
> these are necessary to configure the system. But in time at least
> audio and voltage/current monitoring will also be added.
>
> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
> ---
>
> Changes since v3:
> - Bind in child drivers through device tree rather than using mfd_add_devices
> - Remove defaults arrays for regmap
> - Use a lot of ... in the regmap readable/volatile callbacks
> - Explicitly include register headers, rather than relying on lochnagar.h
> - Add some kernel doc
> - Some minor cosmetic fixups
> - Add a lockdep_assert in lochnagar_update_config
>
> Thanks,
> Charles
>
> MAINTAINERS | 17 ++
> drivers/mfd/Kconfig | 8 +
> drivers/mfd/Makefile | 2 +
> drivers/mfd/lochnagar-i2c.c | 394 ++++++++++++++++++++++++++++++++++++
> include/linux/mfd/lochnagar.h | 55 +++++
> include/linux/mfd/lochnagar1_regs.h | 157 ++++++++++++++
> include/linux/mfd/lochnagar2_regs.h | 253 +++++++++++++++++++++++
> 7 files changed, 886 insertions(+)
> create mode 100644 drivers/mfd/lochnagar-i2c.c
> create mode 100644 include/linux/mfd/lochnagar.h
> create mode 100644 include/linux/mfd/lochnagar1_regs.h
> create mode 100644 include/linux/mfd/lochnagar2_regs.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index f4855974f3250..0398c8752e610 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -3567,6 +3567,23 @@ L: netdev@vger.kernel.org
> S: Maintained
> F: drivers/net/ethernet/cirrus/ep93xx_eth.c
>
> +CIRRUS LOGIC LOCHNAGAR DRIVER
> +M: Charles Keepax <ckeepax@opensource.cirrus.com>
> +M: Richard Fitzgerald <rf@opensource.cirrus.com>
> +L: patches@opensource.cirrus.com
> +S: Supported
> +F: drivers/clk/clk-lochnagar.c
> +F: drivers/mfd/lochnagar-i2c.c
> +F: drivers/pinctrl/cirrus/pinctrl-lochnagar*
> +F: drivers/regulator/lochnagar-regulator.c
> +F: include/dt-bindings/clk/lochnagar.h
> +F: include/dt-bindings/pinctrl/lochnagar.h
> +F: include/linux/mfd/lochnagar*
> +F: Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt
> +F: Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt
> +F: Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt
> +F: Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt
> +
> CISCO FCOE HBA DRIVER
> M: Satish Kharat <satishkh@cisco.com>
> M: Sesidhar Baddela <sebaddel@cisco.com>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 8c5dfdce4326c..51de2db3f6537 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1685,6 +1685,14 @@ config MFD_VX855
> VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
> and/or vx855_gpio drivers for this to do anything useful.
>
> +config MFD_LOCHNAGAR
> + bool "Cirrus Logic Lochnagar Audio Development Board"
> + select MFD_CORE
> + select REGMAP_I2C
> + depends on I2C=y && OF
> + help
> + Support for Cirrus Logic Lochnagar audio development board.
> +
> config MFD_ARIZONA
> select REGMAP
> select REGMAP_IRQ
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 12980a4ad4608..93284316d5307 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -37,6 +37,8 @@ obj-$(CONFIG_MFD_T7L66XB) += t7l66xb.o tmio_core.o
> obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o tmio_core.o
> obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o tmio_core.o
>
> +obj-$(CONFIG_MFD_LOCHNAGAR) += lochnagar-i2c.o
> +
> obj-$(CONFIG_MFD_ARIZONA) += arizona-core.o
> obj-$(CONFIG_MFD_ARIZONA) += arizona-irq.o
> obj-$(CONFIG_MFD_ARIZONA_I2C) += arizona-i2c.o
> diff --git a/drivers/mfd/lochnagar-i2c.c b/drivers/mfd/lochnagar-i2c.c
> new file mode 100644
> index 0000000000000..133159d7646ed
> --- /dev/null
> +++ b/drivers/mfd/lochnagar-i2c.c
> @@ -0,0 +1,394 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Lochnagar I2C bus interface
> + *
> + * Copyright (c) 2012-2018 Cirrus Logic, Inc. and
> + * Cirrus Logic International Semiconductor Ltd.
> + *
> + * Author: Charles Keepax <ckeepax@opensource.cirrus.com>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/lockdep.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mutex.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/regmap.h>
> +
> +#include <linux/mfd/lochnagar.h>
> +#include <linux/mfd/lochnagar1_regs.h>
> +#include <linux/mfd/lochnagar2_regs.h>
> +
> +#define LOCHNAGAR_BOOT_RETRIES 10
> +#define LOCHNAGAR_BOOT_DELAY_MS 350
> +
> +#define LOCHNAGAR_CONFIG_POLL_US 10000
> +
> +static bool lochnagar1_readable_register(struct device *dev, unsigned int reg)
> +{
> + switch (reg) {
> + case LOCHNAGAR_SOFTWARE_RESET:
> + case LOCHNAGAR_FIRMWARE_ID1...LOCHNAGAR_FIRMWARE_ID2:
> + case LOCHNAGAR1_CDC_AIF1_SEL...LOCHNAGAR1_CDC_AIF3_SEL:
> + case LOCHNAGAR1_CDC_MCLK1_SEL...LOCHNAGAR1_CDC_MCLK2_SEL:
> + case LOCHNAGAR1_CDC_AIF_CTRL1...LOCHNAGAR1_CDC_AIF_CTRL2:
> + case LOCHNAGAR1_EXT_AIF_CTRL:
> + case LOCHNAGAR1_DSP_AIF1_SEL...LOCHNAGAR1_DSP_AIF2_SEL:
> + case LOCHNAGAR1_DSP_CLKIN_SEL:
> + case LOCHNAGAR1_DSP_AIF:
> + case LOCHNAGAR1_GF_AIF1...LOCHNAGAR1_GF_AIF2:
> + case LOCHNAGAR1_PSIA_AIF:
> + case LOCHNAGAR1_PSIA1_SEL...LOCHNAGAR1_PSIA2_SEL:
> + case LOCHNAGAR1_SPDIF_AIF_SEL:
> + case LOCHNAGAR1_GF_AIF3_SEL...LOCHNAGAR1_GF_AIF4_SEL:
> + case LOCHNAGAR1_GF_CLKOUT1_SEL:
> + case LOCHNAGAR1_GF_AIF1_SEL...LOCHNAGAR1_GF_AIF2_SEL:
> + case LOCHNAGAR1_GF_GPIO2...LOCHNAGAR1_GF_GPIO7:
> + case LOCHNAGAR1_RST:
> + case LOCHNAGAR1_LED1...LOCHNAGAR1_LED2:
> + case LOCHNAGAR1_I2C_CTRL:
> + return true;
> + default:
> + return false;
> + }
> +}

Niiiiiice!

Driver is much better for me to swallow like this.

For my own reference:
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2018-11-13 09:31    [W:0.598 / U:2.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site