lkml.org 
[lkml]   [2018]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/7] arm64: allwinner: h6: Add common orangepi nodes into dtsi
On Thu, Nov 1, 2018 at 3:13 PM Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> On Thu, Nov 1, 2018 at 8:23 AM Chen-Yu Tsai <wens@csie.org> wrote:
> >
> > On Thu, Nov 1, 2018 at 2:37 AM Jagan Teki <jagan@amarulasolutions.com> wrote:
> > >
> > > Orangepi H6 boards, One Plus and Lite2 shares common
> > > nodes like axp805, uart, mmc0 etc and the common differences
> > > between them is Ethernet is available in One Plus where
> > > as Wifi, USB3, CSI port is available in Lite2.
> >
> > You can claim this for pretty much all Allwinner boards, because they mostly
> > derive from the reference designs Allwinner's design houses put out. Yet we
> > don't do this for all of them. We do this for boards that are clearly derived
> > or extended from one another. One example would be the Orange Pi PC and PC Plus.
> >
> > Do you have any evidence to suggest so? This is not about common device nodes,
> > but a common hardware design.
>
> I got this information from hardware schematics and from Steven (added
> in to list), he too claimed the same.

Good. Please add that to the commit message. The vendor's intentions are as
important as the actual facts.

ChenYu

\
 
 \ /
  Last update: 2018-11-01 08:21    [W:0.066 / U:0.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site