[lkml]   [2018]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v5 3/3] gpiolib: Show correct direction from the beginning
On 10/5/2018 10:54 AM, Timur Tabi wrote:
> On 10/05/2018 11:17 AM, Jeffrey Hugo wrote:>
>> Looks like the driver is initing just fine to me. Is setting up the
>> jumpers and running gpio-test warranted?
> Well, that test only makes sure that input/output is actually working
> on the hardware level, but it also makes sure that the GPIOs are
> numbered correctly.
> If you want, just put a printk(... offset) in msm_gpio_get() and read
> from a GPIO that you know you have access to, and make sure the
> 'offset' is correct.
> Then try reading from a GPIO that you don't have access to, and make
> sure you get a failure before msm_gpio_get() is called.


For the series:

Tested-by: Jeffrey Hugo <>

Jeffrey Hugo
Qualcomm Datacenter Technologies as an affiliate of Qualcomm
Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.

 \ /
  Last update: 2018-10-09 19:15    [W:0.086 / U:5.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site