lkml.org 
[lkml]   [2018]   [Oct]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.18 34/58] qed: Fix populating the invalid stag value in multi function mode.
Date
From: Sudarsana Reddy Kalluru <sudarsana.kalluru@cavium.com>

[ Upstream commit 50fdf60181b01b7383b85d4b9acbb842263d96a2 ]

In multi-function mode, driver receives the stag value (outer vlan)
for a PF from management FW (MFW). If the stag value is negotiated prior to
the driver load, then the stag is not notified to the driver and hence
driver will have the invalid stag value.
The fix is to request the MFW for STAG value during the driver load time.

Fixes: cac6f691 ("qed: Add support for Unified Fabric Port")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
drivers/net/ethernet/qlogic/qed/qed_dev.c | 15 ++++++++++++++-
drivers/net/ethernet/qlogic/qed/qed_hsi.h | 4 ++++
2 files changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index e5249b4741d0..194f4dbe57d3 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -1636,7 +1636,7 @@ static int qed_vf_start(struct qed_hwfn *p_hwfn,
int qed_hw_init(struct qed_dev *cdev, struct qed_hw_init_params *p_params)
{
struct qed_load_req_params load_req_params;
- u32 load_code, param, drv_mb_param;
+ u32 load_code, resp, param, drv_mb_param;
bool b_default_mtu = true;
struct qed_hwfn *p_hwfn;
int rc = 0, mfw_rc, i;
@@ -1782,6 +1782,19 @@ int qed_hw_init(struct qed_dev *cdev, struct qed_hw_init_params *p_params)

if (IS_PF(cdev)) {
p_hwfn = QED_LEADING_HWFN(cdev);
+
+ /* Get pre-negotiated values for stag, bandwidth etc. */
+ DP_VERBOSE(p_hwfn,
+ QED_MSG_SPQ,
+ "Sending GET_OEM_UPDATES command to trigger stag/bandwidth attention handling\n");
+ drv_mb_param = 1 << DRV_MB_PARAM_DUMMY_OEM_UPDATES_OFFSET;
+ rc = qed_mcp_cmd(p_hwfn, p_hwfn->p_main_ptt,
+ DRV_MSG_CODE_GET_OEM_UPDATES,
+ drv_mb_param, &resp, &param);
+ if (rc)
+ DP_NOTICE(p_hwfn,
+ "Failed to send GET_OEM_UPDATES attention request\n");
+
drv_mb_param = STORM_FW_VERSION;
rc = qed_mcp_cmd(p_hwfn, p_hwfn->p_main_ptt,
DRV_MSG_CODE_OV_UPDATE_STORM_FW_VER,
diff --git a/drivers/net/ethernet/qlogic/qed/qed_hsi.h b/drivers/net/ethernet/qlogic/qed/qed_hsi.h
index bee10c1781fb..baa8a795c551 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_hsi.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_hsi.h
@@ -12414,6 +12414,7 @@ struct public_drv_mb {
#define DRV_MSG_SET_RESOURCE_VALUE_MSG 0x35000000
#define DRV_MSG_CODE_OV_UPDATE_WOL 0x38000000
#define DRV_MSG_CODE_OV_UPDATE_ESWITCH_MODE 0x39000000
+#define DRV_MSG_CODE_GET_OEM_UPDATES 0x41000000

#define DRV_MSG_CODE_BW_UPDATE_ACK 0x32000000
#define DRV_MSG_CODE_NIG_DRAIN 0x30000000
@@ -12539,6 +12540,9 @@ struct public_drv_mb {
#define DRV_MB_PARAM_ESWITCH_MODE_VEB 0x1
#define DRV_MB_PARAM_ESWITCH_MODE_VEPA 0x2

+#define DRV_MB_PARAM_DUMMY_OEM_UPDATES_MASK 0x1
+#define DRV_MB_PARAM_DUMMY_OEM_UPDATES_OFFSET 0
+
#define DRV_MB_PARAM_SET_LED_MODE_OPER 0x0
#define DRV_MB_PARAM_SET_LED_MODE_ON 0x1
#define DRV_MB_PARAM_SET_LED_MODE_OFF 0x2
--
2.17.1
\
 
 \ /
  Last update: 2018-10-08 17:36    [W:0.208 / U:0.976 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site