lkml.org 
[lkml]   [2018]   [Oct]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 4/7] clocksource: arch_timer: Add support for not-fw-configured timer on ARM64
From
Date
+ Mark Rutland

Hi Marek,

On 08/10/18 13:50, Marek Szyprowski wrote:
> Use common infrastructure for ARM Architected Timers erratum to enable
> support for systems with broken CPU firmware (timer registers not
> properly configured). This mode has been already availabled on ARM
> (32bits) architecture. This enables to run Linux kernel on ARM64 boards
> using physical architected timers instead of the virtual ones. Examples
> of such system with broken firmware are Samsung Exynos5433 SoC based
> TM2(e) boards, which is already deployed for years and updating firmware
> is not possible.
>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> ---
> drivers/clocksource/Kconfig | 11 +++++++++++
> drivers/clocksource/arm_arch_timer.c | 15 ++++++++++++---
> 2 files changed, 23 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index a11f4ba98b05..a30752579b03 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -364,6 +364,17 @@ config ARM64_ERRATUM_858921
> The workaround will be dynamically enabled when an affected
> core is detected.
>
> +config ARCH_TIMER_REGISTERS_NOT_FW_CONFIGURED
> + bool "Workaround for arch timer registers not configured by firmware"
> + default y
> + select ARM_ARCH_TIMER_OOL_WORKAROUND
> + depends on ARM_ARCH_TIMER && ARM64
> + help
> + This option enables a workaround for boards, on which arch timer
> + registers are not properly configured by the board firmware.
> + The workaround will be dynamically enabled when an affected
> + board is detected.
> +

I'm sorry, but I'm strongly pushing back on this.

This horrible hack was accepted with the express condition that it would
be limited to ARMv7 platforms (on the ground that we never really
documented the arch timer boot requirements on that version of the
architecture), and would never proliferate on arm64. From day 1, we
established what the boot protocol was, and we mandated that either:

- kernel is entered at EL2 on all CPUs
- cntvoff_el2 is zeroed on all CPUs

and we've got most people to fix their firmware, or live with the
consequences. If these machines cannot receive a non-broken firmware,
what are the odds that they will receive a mainline kernel?

Thanks,

M.
--
Jazz is not dead. It just smells funny...

\
 
 \ /
  Last update: 2018-10-08 15:18    [W:0.096 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site