lkml.org 
[lkml]   [2018]   [Oct]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 1/3] dt-bindings: crypto: Mention clocks for mxs-dcp
On Tue, Oct 02, 2018 at 07:18:21PM +0000, Leonard Crestez wrote:
> Explicit clock enabling is required on 6sll and 6ull so mention that
> standard clock bindings are used.
>
> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
> ---
> Documentation/devicetree/bindings/crypto/fsl-dcp.txt | 2 ++
> 1 file changed, 2 insertions(+)

DT list and maintainers should be copied on bindings update, which needs
to be ACK-ed by DT maintainers.

Shawn

>
> diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt
> index 76a0b4e80e83..4e4d387e38a5 100644
> --- a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt
> +++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt
> @@ -4,10 +4,12 @@ Required properties:
> - compatible : Should be "fsl,<soc>-dcp"
> - reg : Should contain MXS DCP registers location and length
> - interrupts : Should contain MXS DCP interrupt numbers, VMI IRQ and DCP IRQ
> must be supplied, optionally Secure IRQ can be present, but
> is currently not implemented and not used.
> +- clocks : Clock reference (only required on some SOCs: 6ull and 6sll).
> +- clock-names : Must be "dcp".
>
> Example:
>
> dcp@80028000 {
> compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2018-10-08 02:37    [W:0.063 / U:0.948 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site