lkml.org 
[lkml]   [2018]   [Oct]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V6 15/23] mmc: mmci: add variant property to define irq pio mask
Date
From: Ludovic Barre <ludovic.barre@st.com>

This patch allows to define specific pio mask for variants.
Needed to support the STM32 sdmmc variant which has some bits
with different meaning (bits: 21,20,13,12,9)

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
drivers/mmc/host/mmci.c | 13 +++++++++++--
drivers/mmc/host/mmci.h | 5 ++++-
2 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 0443b3a..ca442fb 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -67,6 +67,7 @@ static struct variant_data variant_arm = {
.f_max = 100000000,
.reversed_irq_handling = true,
.mmcimask1 = true,
+ .irq_pio_mask = MCI_IRQ_PIO_MASK,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_ROD,
.init = mmci_variant_init,
@@ -85,6 +86,7 @@ static struct variant_data variant_arm_extended_fifo = {
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 100000000,
.mmcimask1 = true,
+ .irq_pio_mask = MCI_IRQ_PIO_MASK,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_ROD,
.init = mmci_variant_init,
@@ -104,6 +106,7 @@ static struct variant_data variant_arm_extended_fifo_hwfc = {
.pwrreg_powerup = MCI_PWR_UP,
.f_max = 100000000,
.mmcimask1 = true,
+ .irq_pio_mask = MCI_IRQ_PIO_MASK,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_ROD,
.init = mmci_variant_init,
@@ -129,6 +132,7 @@ static struct variant_data variant_u300 = {
.pwrreg_clkgate = true,
.pwrreg_nopower = true,
.mmcimask1 = true,
+ .irq_pio_mask = MCI_IRQ_PIO_MASK,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_OD,
.init = mmci_variant_init,
@@ -155,6 +159,7 @@ static struct variant_data variant_nomadik = {
.pwrreg_clkgate = true,
.pwrreg_nopower = true,
.mmcimask1 = true,
+ .irq_pio_mask = MCI_IRQ_PIO_MASK,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_OD,
.init = mmci_variant_init,
@@ -187,6 +192,7 @@ static struct variant_data variant_ux500 = {
.busy_detect_mask = MCI_ST_BUSYENDMASK,
.pwrreg_nopower = true,
.mmcimask1 = true,
+ .irq_pio_mask = MCI_IRQ_PIO_MASK,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_OD,
.init = mmci_variant_init,
@@ -221,6 +227,7 @@ static struct variant_data variant_ux500v2 = {
.busy_detect_mask = MCI_ST_BUSYENDMASK,
.pwrreg_nopower = true,
.mmcimask1 = true,
+ .irq_pio_mask = MCI_IRQ_PIO_MASK,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_OD,
.init = mmci_variant_init,
@@ -237,6 +244,7 @@ static struct variant_data variant_stm32 = {
.cmdreg_lrsp_crc = MCI_CPSM_RESPONSE | MCI_CPSM_LONGRSP,
.cmdreg_srsp_crc = MCI_CPSM_RESPONSE,
.cmdreg_srsp = MCI_CPSM_RESPONSE,
+ .irq_pio_mask = MCI_IRQ_PIO_MASK,
.datalength_bits = 24,
.datactrl_blocksz = 11,
.datactrl_dpsm_enable = MCI_DPSM_ENABLE,
@@ -273,6 +281,7 @@ static struct variant_data variant_qcom = {
.qcom_fifo = true,
.qcom_dml = true,
.mmcimask1 = true,
+ .irq_pio_mask = MCI_IRQ_PIO_MASK,
.start_err = MCI_STARTBITERR,
.opendrain = MCI_ROD,
.init = qcom_variant_init,
@@ -556,7 +565,7 @@ static void mmci_set_mask1(struct mmci_host *host, unsigned int mask)
if (host->singleirq) {
unsigned int mask0 = readl(base + MMCIMASK0);

- mask0 &= ~MCI_IRQ1MASK;
+ mask0 &= ~variant->irq_pio_mask;
mask0 |= mask;

writel(mask0, base + MMCIMASK0);
@@ -1458,7 +1467,7 @@ static irqreturn_t mmci_irq(int irq, void *dev_id)
if (status & host->mask1_reg)
mmci_pio_irq(irq, dev_id);

- status &= ~MCI_IRQ1MASK;
+ status &= ~host->variant->irq_pio_mask;
}

/*
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 04d021e..783a7ad 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -186,7 +186,7 @@
MCI_CMDRESPENDMASK | MCI_CMDSENTMASK)

/* These interrupts are directed to IRQ1 when two IRQ lines are available */
-#define MCI_IRQ1MASK \
+#define MCI_IRQ_PIO_MASK \
(MCI_RXFIFOHALFFULLMASK | MCI_RXDATAAVLBLMASK | \
MCI_TXFIFOHALFEMPTYMASK)

@@ -239,6 +239,8 @@ struct mmci_host;
* @qcom_dml: enables qcom specific dma glue for dma transfers.
* @reversed_irq_handling: handle data irq before cmd irq.
* @mmcimask1: true if variant have a MMCIMASK1 register.
+ * @irq_pio_mask: bitmask used to manage interrupt pio transfert in mmcimask
+ * register
* @start_err: bitmask identifying the STARTBITERR bit inside MMCISTATUS
* register.
* @opendrain: bitmask identifying the OPENDRAIN bit inside MMCIPOWER register
@@ -278,6 +280,7 @@ struct variant_data {
u8 qcom_dml:1;
u8 reversed_irq_handling:1;
u8 mmcimask1:1;
+ unsigned int irq_pio_mask;
u32 start_err;
u32 opendrain;
void (*init)(struct mmci_host *host);
--
2.7.4
\
 
 \ /
  Last update: 2018-10-08 14:12    [W:0.132 / U:2.752 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site