lkml.org 
[lkml]   [2018]   [Oct]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v3 5/6] net: phy: mscc: shorten `x != 0` condition to `x`
Date
`if (x != 0)` is basically a more verbose version of `if (x)` so let's
use the latter so it's consistent throughout the whole driver.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
---
drivers/net/phy/mscc.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c
index 0ff7803ed16b..6bfdc168c62b 100644
--- a/drivers/net/phy/mscc.c
+++ b/drivers/net/phy/mscc.c
@@ -310,7 +310,7 @@ static int vsc85xx_mdix_set(struct phy_device *phydev, u8 mdix)
DISABLE_HP_AUTO_MDIX_MASK);
}
rc = phy_write(phydev, MSCC_PHY_BYPASS_CONTROL, reg_val);
- if (rc != 0)
+ if (rc)
return rc;

reg_val = 0;
@@ -425,14 +425,14 @@ static int vsc85xx_wol_set(struct phy_device *phydev,
reg_val = phy_read(phydev, MII_VSC85XX_INT_MASK);
reg_val |= MII_VSC85XX_INT_MASK_WOL;
rc = phy_write(phydev, MII_VSC85XX_INT_MASK, reg_val);
- if (rc != 0)
+ if (rc)
goto out_unlock;
} else {
/* Disable the WOL interrupt */
reg_val = phy_read(phydev, MII_VSC85XX_INT_MASK);
reg_val &= (~MII_VSC85XX_INT_MASK_WOL);
rc = phy_write(phydev, MII_VSC85XX_INT_MASK, reg_val);
- if (rc != 0)
+ if (rc)
goto out_unlock;
}
/* Clear WOL iterrupt status */
@@ -603,7 +603,7 @@ static int vsc85xx_mac_if_set(struct phy_device *phydev,
goto out_unlock;
}
rc = phy_write(phydev, MSCC_PHY_EXT_PHY_CNTL_1, reg_val);
- if (rc != 0)
+ if (rc)
goto out_unlock;

rc = genphy_soft_reset(phydev);
--
2.17.1
\
 
 \ /
  Last update: 2018-10-08 12:08    [W:0.112 / U:25.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site