lkml.org 
[lkml]   [2018]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 4/4] drivers: soc: xilinx: Add ZynqMP power domain driver
Date
From: Jolly Shah <jolly.shah@xilinx.com>

The zynqmp-genpd driver communicates the usage requirements
for logical power domains / devices to the platform FW.
FW is responsible for choosing appropriate power states,
taking Linux' usage information into account.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
---
drivers/firmware/xilinx/Kconfig | 1 +
drivers/firmware/xilinx/zynqmp.c | 15 ++
drivers/soc/xilinx/Kconfig | 9 +
drivers/soc/xilinx/Makefile | 2 +
drivers/soc/xilinx/zynqmp_pm_domains.c | 403 +++++++++++++++++++++++++++++++++
5 files changed, 430 insertions(+)
create mode 100644 drivers/soc/xilinx/zynqmp_pm_domains.c

diff --git a/drivers/firmware/xilinx/Kconfig b/drivers/firmware/xilinx/Kconfig
index 8f44b9c..bd33bbf 100644
--- a/drivers/firmware/xilinx/Kconfig
+++ b/drivers/firmware/xilinx/Kconfig
@@ -6,6 +6,7 @@ menu "Zynq MPSoC Firmware Drivers"

config ZYNQMP_FIRMWARE
bool "Enable Xilinx Zynq MPSoC firmware interface"
+ select MFD_CORE
help
Firmware interface driver is used by different
drivers to communicate with the firmware for
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index faf6a52..6b365df 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -14,6 +14,7 @@
#include <linux/compiler.h>
#include <linux/device.h>
#include <linux/init.h>
+#include <linux/mfd/core.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
@@ -23,6 +24,12 @@
#include <linux/firmware/xlnx-zynqmp.h>
#include "zynqmp-debug.h"

+static const struct mfd_cell firmware_devs[] = {
+ {
+ .name = "zynqmp_power_controller",
+ },
+};
+
/**
* zynqmp_pm_ret_code() - Convert PMU-FW error codes to Linux error codes
* @ret_status: PMUFW return code
@@ -596,11 +603,19 @@ static int zynqmp_firmware_probe(struct platform_device *pdev)

zynqmp_pm_api_debugfs_init();

+ ret = mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE, firmware_devs,
+ ARRAY_SIZE(firmware_devs), NULL, 0, NULL);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add MFD devices %d\n", ret);
+ return ret;
+ }
+
return of_platform_populate(dev->of_node, NULL, NULL, dev);
}

static int zynqmp_firmware_remove(struct platform_device *pdev)
{
+ mfd_remove_devices(&pdev->dev);
zynqmp_pm_api_debugfs_exit();

return 0;
diff --git a/drivers/soc/xilinx/Kconfig b/drivers/soc/xilinx/Kconfig
index 687c8f3..81a345e 100644
--- a/drivers/soc/xilinx/Kconfig
+++ b/drivers/soc/xilinx/Kconfig
@@ -17,4 +17,13 @@ config XILINX_VCU
To compile this driver as a module, choose M here: the
module will be called xlnx_vcu.

+config ZYNQMP_PM_DOMAINS
+ bool "Enable Zynq MPSoC generic PM domains"
+ default y
+ depends on PM && ARCH_ZYNQMP && ZYNQMP_FIRMWARE
+ select PM_GENERIC_DOMAINS
+ help
+ Say yes to enable device power management through PM domains
+ If in doubt, say N.
+
endmenu
diff --git a/drivers/soc/xilinx/Makefile b/drivers/soc/xilinx/Makefile
index dee8fd5..f468d1b 100644
--- a/drivers/soc/xilinx/Makefile
+++ b/drivers/soc/xilinx/Makefile
@@ -1,2 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_XILINX_VCU) += xlnx_vcu.o
+
+obj-$(CONFIG_ZYNQMP_PM_DOMAINS) += zynqmp_pm_domains.o
diff --git a/drivers/soc/xilinx/zynqmp_pm_domains.c b/drivers/soc/xilinx/zynqmp_pm_domains.c
new file mode 100644
index 0000000..999fe67
--- /dev/null
+++ b/drivers/soc/xilinx/zynqmp_pm_domains.c
@@ -0,0 +1,403 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ZynqMP Generic PM domain support
+ *
+ * Copyright (C) 2015-2018 Xilinx, Inc.
+ *
+ * Davorin Mista <davorin.mista@aggios.com>
+ * Jolly Shah <jollys@xilinx.com>
+ * Rajan Vaja <rajan.vaja@xilinx.com>
+ */
+
+#include <linux/err.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/slab.h>
+
+#include <linux/firmware/xlnx-zynqmp.h>
+
+/* Flag stating if PM nodes mapped to the PM domain has been requested */
+#define ZYNQMP_PM_DOMAIN_REQUESTED BIT(0)
+
+/**
+ * struct zynqmp_pm_domain - Wrapper around struct generic_pm_domain
+ * @gpd: Generic power domain
+ * @dev_list: List of devices belong to power domain
+ * @node_ids: PM node IDs corresponding to device(s) inside PM domain
+ * @node_id_num: Number of PM node IDs
+ * @flags: ZynqMP PM domain flags
+ */
+struct zynqmp_pm_domain {
+ struct generic_pm_domain gpd;
+ struct list_head dev_list;
+ const u32 *node_ids;
+ int node_id_num;
+ u8 flags;
+};
+
+/*
+ * struct zynqmp_domain_device - Device node present in power domain
+ * @dev: Device
+ * &list: List member for the devices in domain list
+ */
+struct zynqmp_domain_device {
+ struct device *dev;
+ struct list_head list;
+};
+
+/*
+ * struct zynqmp_pd_info - PM domain info
+ * @id: Number of PM node IDs
+ * @ids: PM node IDs corresponding to device(s) inside PM domain
+ * @name: PM node name
+ */
+struct zynqmp_pd_info {
+ u32 num_id;
+ const u32 *ids;
+ const char *name;
+};
+
+/**
+ * zynqmp_gpd_is_active_wakeup_path() - Check if device is in wakeup source
+ * path
+ * @dev: Device to check for wakeup source path
+ * @not_used: Data member (not required)
+ *
+ * This function is checks device's child hierarchy and checks if any device is
+ * set as wakeup source.
+ *
+ * Return: 1 if device is in wakeup source path else 0
+ */
+static int zynqmp_gpd_is_active_wakeup_path(struct device *dev, void *not_used)
+{
+ int may_wakeup;
+
+ may_wakeup = device_may_wakeup(dev);
+ if (may_wakeup)
+ return may_wakeup;
+
+ return device_for_each_child(dev, NULL,
+ zynqmp_gpd_is_active_wakeup_path);
+}
+
+/**
+ * zynqmp_gpd_power_on() - Power on PM domain
+ * @domain: Generic PM domain
+ *
+ * This function is called before devices inside a PM domain are resumed, to
+ * power on PM domain.
+ *
+ * Return: 0 on success, error code otherwise
+ */
+static int zynqmp_gpd_power_on(struct generic_pm_domain *domain)
+{
+ int ret, i;
+ struct zynqmp_pm_domain *pd;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ if (!eemi_ops || !eemi_ops->set_requirement)
+ return -ENXIO;
+
+ pd = container_of(domain, struct zynqmp_pm_domain, gpd);
+ for (i = 0; i < pd->node_id_num; i++) {
+ ret = eemi_ops->set_requirement(pd->node_ids[i],
+ ZYNQMP_PM_CAPABILITY_ACCESS,
+ ZYNQMP_PM_MAX_QOS,
+ ZYNQMP_PM_REQUEST_ACK_BLOCKING);
+ if (ret) {
+ pr_err("%s() %s set requirement for node %d failed: %d\n",
+ __func__, domain->name, pd->node_ids[i], ret);
+ return ret;
+ }
+ }
+
+ pr_debug("%s() Powered on %s domain\n", __func__, domain->name);
+ return 0;
+}
+
+/**
+ * zynqmp_gpd_power_off() - Power off PM domain
+ * @domain: Generic PM domain
+ *
+ * This function is called after devices inside a PM domain are suspended, to
+ * power off PM domain.
+ *
+ * Return: 0 on success, error code otherwise
+ */
+static int zynqmp_gpd_power_off(struct generic_pm_domain *domain)
+{
+ int ret, i;
+ struct zynqmp_pm_domain *pd;
+ struct zynqmp_domain_device *zdev, *tmp;
+ u32 capabilities = 0;
+ bool may_wakeup;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ if (!eemi_ops || !eemi_ops->set_requirement)
+ return -ENXIO;
+
+ pd = container_of(domain, struct zynqmp_pm_domain, gpd);
+
+ /* If domain is already released there is nothing to be done */
+ if (!(pd->flags & ZYNQMP_PM_DOMAIN_REQUESTED))
+ return 0;
+
+ list_for_each_entry_safe(zdev, tmp, &pd->dev_list, list) {
+ /* If device is in wakeup path, set capability to WAKEUP */
+ may_wakeup = zynqmp_gpd_is_active_wakeup_path(zdev->dev, NULL);
+ if (may_wakeup) {
+ dev_dbg(zdev->dev, "device is in wakeup path in %s\n",
+ domain->name);
+ capabilities = ZYNQMP_PM_CAPABILITY_WAKEUP;
+ break;
+ }
+ }
+
+ for (i = pd->node_id_num - 1; i >= 0; i--) {
+ ret = eemi_ops->set_requirement(pd->node_ids[i],
+ capabilities, 0,
+ ZYNQMP_PM_REQUEST_ACK_NO);
+ /**
+ * If powering down of any node inside this domain fails,
+ * report and return the error
+ */
+ if (ret) {
+ pr_err("%s() %s set requirement for node %d failed: %d\n",
+ __func__, domain->name, pd->node_ids[i], ret);
+ return ret;
+ }
+ }
+
+ pr_debug("%s() Powered off %s domain\n", __func__, domain->name);
+ return 0;
+}
+
+/**
+ * zynqmp_gpd_attach_dev() - Attach device to the PM domain
+ * @domain: Generic PM domain
+ * @dev: Device to attach
+ *
+ * Return: 0 on success, error code otherwise
+ */
+static int zynqmp_gpd_attach_dev(struct generic_pm_domain *domain,
+ struct device *dev)
+{
+ int ret, i;
+ struct zynqmp_pm_domain *pd;
+ struct zynqmp_domain_device *zdev;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ if (!eemi_ops || !eemi_ops->request_node)
+ return -ENXIO;
+
+ pd = container_of(domain, struct zynqmp_pm_domain, gpd);
+
+ zdev = devm_kzalloc(dev, sizeof(*zdev), GFP_KERNEL);
+ if (!zdev)
+ return -ENOMEM;
+
+ zdev->dev = dev;
+ list_add(&zdev->list, &pd->dev_list);
+
+ /* If this is not the first device to attach there is nothing to do */
+ if (domain->device_count)
+ return 0;
+
+ for (i = 0; i < pd->node_id_num; i++) {
+ ret = eemi_ops->request_node(pd->node_ids[i], 0, 0,
+ ZYNQMP_PM_REQUEST_ACK_BLOCKING);
+ /* If requesting a node fails print and return the error */
+ if (ret) {
+ pr_err("%s() %s request failed for node %d: %d\n",
+ __func__, domain->name, pd->node_ids[i], ret);
+ list_del(&zdev->list);
+ zdev->dev = NULL;
+ devm_kfree(dev, zdev);
+ return ret;
+ }
+ }
+
+ pd->flags |= ZYNQMP_PM_DOMAIN_REQUESTED;
+
+ pr_debug("%s() %s attached to %s domain\n", __func__,
+ dev_name(dev), domain->name);
+ return 0;
+}
+
+/**
+ * zynqmp_gpd_detach_dev() - Detach device from the PM domain
+ * @domain: Generic PM domain
+ * @dev: Device to detach
+ */
+static void zynqmp_gpd_detach_dev(struct generic_pm_domain *domain,
+ struct device *dev)
+{
+ int ret, i;
+ struct zynqmp_pm_domain *pd;
+ struct zynqmp_domain_device *zdev, *tmp;
+ const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+
+ if (!eemi_ops || !eemi_ops->release_node)
+ return;
+
+ pd = container_of(domain, struct zynqmp_pm_domain, gpd);
+
+ list_for_each_entry_safe(zdev, tmp, &pd->dev_list, list)
+ if (zdev->dev == dev) {
+ list_del(&zdev->list);
+ zdev->dev = NULL;
+ devm_kfree(dev, zdev);
+ }
+
+ /* If this is not the last device to detach there is nothing to do */
+ if (domain->device_count)
+ return;
+
+ for (i = 0; i < pd->node_id_num; i++) {
+ ret = eemi_ops->release_node(pd->node_ids[i]);
+ /* If releasing a node fails print the error and return */
+ if (ret) {
+ pr_err("%s() %s release failed for node %d: %d\n",
+ __func__, domain->name, pd->node_ids[i], ret);
+ return;
+ }
+ }
+
+ pd->flags &= ~ZYNQMP_PM_DOMAIN_REQUESTED;
+
+ pr_debug("%s() %s detached from %s domain\n", __func__,
+ dev_name(dev), domain->name);
+}
+
+static const u32 usb0_ids[] = {NODE_USB_0};
+static const u32 usb1_ids[] = {NODE_USB_1};
+static const u32 sata_ids[] = {NODE_SATA};
+static const u32 spi0_ids[] = {NODE_SPI_0};
+static const u32 spi1_ids[] = {NODE_SPI_1};
+static const u32 uart0_ids[] = {NODE_UART_0};
+static const u32 uart1_ids[] = {NODE_UART_1};
+static const u32 eth0_ids[] = {NODE_ETH_0};
+static const u32 eth1_ids[] = {NODE_ETH_1};
+static const u32 eth2_ids[] = {NODE_ETH_2};
+static const u32 eth3_ids[] = {NODE_ETH_3};
+static const u32 i2c0_ids[] = {NODE_I2C_0};
+static const u32 i2c1_ids[] = {NODE_I2C_1};
+static const u32 dp_ids[] = {NODE_DP};
+static const u32 gdma_ids[] = {NODE_GDMA};
+static const u32 adma_ids[] = {NODE_ADMA};
+static const u32 ttc0_ids[] = {NODE_TTC_0};
+static const u32 ttc1_ids[] = {NODE_TTC_1};
+static const u32 ttc2_ids[] = {NODE_TTC_2};
+static const u32 ttc3_ids[] = {NODE_TTC_3};
+static const u32 sd0_ids[] = {NODE_SD_0};
+static const u32 sd1_ids[] = {NODE_SD_1};
+static const u32 nand_ids[] = {NODE_NAND};
+static const u32 qspi_ids[] = {NODE_QSPI};
+static const u32 gpio_ids[] = {NODE_GPIO};
+static const u32 can0_ids[] = {NODE_CAN_0};
+static const u32 can1_ids[] = {NODE_CAN_1};
+static const u32 pcie_ids[] = {NODE_PCIE};
+static const u32 gpu_ids[] = {NODE_GPU, NODE_GPU_PP_0, NODE_GPU_PP_1};
+
+#define ZYNQMP_PM_DOMAIN(nm) { \
+ .name = "pd-" #nm, \
+ .num_id = ARRAY_SIZE(nm ## _ids), \
+ .ids = nm ## _ids, \
+ }
+
+static const struct zynqmp_pd_info pm_ids[] = {
+ ZYNQMP_PM_DOMAIN(usb0),
+ ZYNQMP_PM_DOMAIN(usb1),
+ ZYNQMP_PM_DOMAIN(sata),
+ ZYNQMP_PM_DOMAIN(spi0),
+ ZYNQMP_PM_DOMAIN(spi1),
+ ZYNQMP_PM_DOMAIN(uart0),
+ ZYNQMP_PM_DOMAIN(uart1),
+ ZYNQMP_PM_DOMAIN(eth0),
+ ZYNQMP_PM_DOMAIN(eth1),
+ ZYNQMP_PM_DOMAIN(eth2),
+ ZYNQMP_PM_DOMAIN(eth3),
+ ZYNQMP_PM_DOMAIN(i2c0),
+ ZYNQMP_PM_DOMAIN(i2c1),
+ ZYNQMP_PM_DOMAIN(dp),
+ ZYNQMP_PM_DOMAIN(gdma),
+ ZYNQMP_PM_DOMAIN(adma),
+ ZYNQMP_PM_DOMAIN(ttc0),
+ ZYNQMP_PM_DOMAIN(ttc1),
+ ZYNQMP_PM_DOMAIN(ttc2),
+ ZYNQMP_PM_DOMAIN(ttc3),
+ ZYNQMP_PM_DOMAIN(sd0),
+ ZYNQMP_PM_DOMAIN(sd1),
+ ZYNQMP_PM_DOMAIN(nand),
+ ZYNQMP_PM_DOMAIN(qspi),
+ ZYNQMP_PM_DOMAIN(gpio),
+ ZYNQMP_PM_DOMAIN(can0),
+ ZYNQMP_PM_DOMAIN(can1),
+ ZYNQMP_PM_DOMAIN(pcie),
+ ZYNQMP_PM_DOMAIN(gpu),
+};
+
+static int zynqmp_gpd_probe(struct platform_device *pdev)
+{
+ int i;
+ struct genpd_onecell_data *zynqmp_pd_data;
+ struct generic_pm_domain **domains;
+ struct zynqmp_pm_domain *pd;
+ struct device *dev = &pdev->dev;
+
+ pd = devm_kcalloc(dev, ARRAY_SIZE(pm_ids), sizeof(*pd), GFP_KERNEL);
+ if (!pd)
+ return -ENOMEM;
+
+ zynqmp_pd_data = devm_kzalloc(dev, sizeof(*zynqmp_pd_data), GFP_KERNEL);
+ if (!zynqmp_pd_data)
+ return -ENOMEM;
+
+ domains = devm_kcalloc(dev, ARRAY_SIZE(pm_ids), sizeof(*domains),
+ GFP_KERNEL);
+ if (!domains)
+ return -ENOMEM;
+
+ for (i = 0; i < ARRAY_SIZE(pm_ids); i++, pd++) {
+ pd->node_id_num = pm_ids[i].num_id;
+ pd->node_ids = pm_ids[i].ids;
+ pd->gpd.name = pm_ids[i].name;
+ pd->gpd.power_off = zynqmp_gpd_power_off;
+ pd->gpd.power_on = zynqmp_gpd_power_on;
+ pd->gpd.attach_dev = zynqmp_gpd_attach_dev;
+ pd->gpd.detach_dev = zynqmp_gpd_detach_dev;
+
+ domains[i] = &pd->gpd;
+
+ /* Mark all PM domains as initially powered off */
+ pm_genpd_init(&pd->gpd, NULL, true);
+ INIT_LIST_HEAD(&pd->dev_list);
+ }
+
+ zynqmp_pd_data->domains = domains;
+ zynqmp_pd_data->num_domains = ARRAY_SIZE(pm_ids);
+ of_genpd_add_provider_onecell(dev->parent->of_node, zynqmp_pd_data);
+
+ return 0;
+}
+
+static int zynqmp_gpd_remove(struct platform_device *pdev)
+{
+ of_genpd_del_provider(pdev->dev.parent->of_node);
+
+ return 0;
+}
+
+static struct platform_driver zynqmp_power_domain_driver = {
+ .driver = {
+ .name = "zynqmp_power_controller",
+ },
+ .probe = zynqmp_gpd_probe,
+ .remove = zynqmp_gpd_remove,
+};
+module_platform_driver(zynqmp_power_domain_driver);
+
+MODULE_ALIAS("platform:zynqmp_power_controller");
--
2.7.4
\
 
 \ /
  Last update: 2018-10-04 23:25    [W:0.246 / U:0.948 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site