[lkml]   [2018]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/4] PCI: imx: Add PME_Turn_Off support
When the root complex suspends it must send a PME_Turn_Off TLP.
Implement this by asserting the "turnoff" reset.

On imx7d this functionality is part of the SRC and exposed through the
linux reset-controller subsystem. On imx6 equivalent bits are in the
IOMUXC GPR area which the imx6-pcie driver accesses directly.

This is only for imx7d right now but it's deliberately implemented as an
optional reset, ignoring the chip variant:
* Older dtbs won't have this reset so it will be ignored.
* Future chips might also expose this as a reset controller.

For example imx8m (not yet supported) has the exact same
PCIE_CTRL_APPS_TURNOFF bit in the same location.

Changes since v1:
* Add 1-10ms sleep after PME_Turn_Off, with explanation
* Slight fix in commit msg (this is functionality is)
* Link:

Leonard Crestez (4):
dt-bindings: imx6q-pcie: Add turnoff reset for imx7d
ARM: dts: imx7d: Add turnoff reset
PCI: imx: Add PME_Turn_Off support

.../bindings/pci/fsl,imx6q-pcie.txt | 1 +
arch/arm/boot/dts/imx7d.dtsi | 5 ++--
drivers/pci/controller/dwc/pci-imx6.c | 24 +++++++++++++++++++
drivers/reset/reset-imx7.c | 1 +
include/dt-bindings/reset/imx7-reset.h | 4 +++-
5 files changed, 32 insertions(+), 3 deletions(-)


 \ /
  Last update: 2018-10-04 18:34    [W:0.105 / U:7.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site