lkml.org 
[lkml]   [2018]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/2] Add SECO Boards CEC device driver
From
Date
Hi Ettore,

On 02/10/2018 18:59, ektor5 wrote:
> This series of patches aims to add CEC functionalities to SECO
> devices, in particular UDOO X86.
>
> The communication is achieved via Braswell SMBus (i2c-i801) to the
> onboard STM32 microcontroller that handles the CEC signals. The driver
> use direct access to the PCI addresses, due to the limitations of the
> specific driver in presence of ACPI calls.
>
> The basic functionalities are tested with success with cec-ctl and
> cec-compliance.

Glad to see another user of the i915 cec notifier !

Neil

>
> Ettore Chimenti (2):
> media: add SECO cec driver
> seco-cec: add Consumer-IR support
>
> MAINTAINERS | 6 +
> drivers/media/platform/Kconfig | 21 +
> drivers/media/platform/Makefile | 4 +
> drivers/media/platform/seco-cec/Makefile | 1 +
> drivers/media/platform/seco-cec/seco-cec.c | 859 +++++++++++++++++++++
> drivers/media/platform/seco-cec/seco-cec.h | 143 ++++
> 6 files changed, 1034 insertions(+)
> create mode 100644 drivers/media/platform/seco-cec/Makefile
> create mode 100644 drivers/media/platform/seco-cec/seco-cec.c
> create mode 100644 drivers/media/platform/seco-cec/seco-cec.h
>

\
 
 \ /
  Last update: 2018-10-04 14:30    [W:0.826 / U:2.768 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site