lkml.org 
[lkml]   [2018]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] dvb: Allow MAC addresses to be mapped to stable device names with udev
Em Wed, 31 Oct 2018 15:51:40 +0000
David Howells <dhowells@redhat.com> escreveu:

> David Howells <dhowells@redhat.com> wrote:
>
> > > > > Devices without a mac address shouldn't have a mac_dvb sysfs attribute,
> > > > > I think.
> > > >
> > > > I'm not sure that's possible within the core infrastructure. It's a
> > > > class attribute set when the class is created; I'm not sure it can be
> > > > overridden on a per-device basis.
> > > >
> > > > Possibly the file could return "" or "none" in this case?
> > >
> > > That's very ugly. Have a look at, for example, rc-core wakeup filters:
> > >
> > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/media/rc/rc-main.c#n1844
> >
> > By analogy, then, I think the thing to do is to put something like struct
> > rc_dev::sysfs_groups[] into struct dvb_device (or maybe struct dvb_adapter)
> > and then the dvb_mac attribute in there during dvb_register_device() based on
> > whether or not the MAC address is not all zeros at that point.
>
> Hmmm... This is trickier than it seems. At the point the device struct is
> registered, the MAC address hasn't yet been read:
>
> [ 13.865905] cx23885: CORE cx23885[1]: subsystem: 4254:0952, board: DVBSky S952 [card=50,autodetected]
> [ 14.095559] cx25840 8-0044: cx23885 A/V decoder found @ 0x88 (cx23885[1])
> [ 14.723127] cx25840 8-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
> [ 14.738377] cx23885: cx23885_dvb_register() allocating 1 frontend(s)
> [ 14.738378] cx23885: cx23885[1]: cx23885 based dvb card
> [ 14.742536] i2c i2c-7: Added multiplexed i2c bus 9
> [ 15.096912] ts2020 9-0060: Montage Technology TS2022 successfully identified
> [ 15.096933] dvbdev: DVB: registering new adapter (cx23885[1])
> [ 15.096936] cx23885 0000:06:00.0: DVB: registering adapter 2 frontend 0 (Montage Technology M88DS3103)...
> [ 15.124665] cx23885: DVBSky S952 port 1 MAC address: 00:17:42:54:09:52
> [ 15.124666] cx23885: cx23885_dvb_register() allocating 1 frontend(s)
> [ 15.124674] cx23885: cx23885[1]: cx23885 based dvb card
> [ 15.128860] i2c i2c-6: Added multiplexed i2c bus 10
> [ 15.228172] ts2020 10-0060: Montage Technology TS2022 successfully identified
> [ 15.228188] dvbdev: DVB: registering new adapter (cx23885[1])
> [ 15.228190] cx23885 0000:06:00.0: DVB: registering adapter 3 frontend 0 (Montage Technology M88DS3103)...
> [ 15.255996] cx23885: DVBSky S952 port 2 MAC address: 00:17:42:54:09:53
> [ 15.255999] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xa5
> [ 15.256004] cx23885: cx23885[1]/0: found at 0000:06:00.0, rev: 4, irq: 19, latency: 0, mmio: 0xf7a00000
>
> The device structs are registered at 15.096936 and 15.228190 and this is the
> point by which I think I have to set the device::groups pointer.
>
> However, the device isn't fully initialised at this point and the MAC address
> hasn't yet been read - and so the attribute doesn't appear. proposed_mac is
> set right after lines 15.124665 and 15.255996. Interestingly, a third of a
> second elapses between the device registration and the MAC being printed for
> each adapter.
>
> Any suggestions?

Yeah, I was afraid about that. At V4L2 core, what we do is that we first
do everything, including firmware load, and only after having everything
setup, we register the char device.

I suspect it should be possible to do that too at dvb-usb and dvb-usb-v2,
but some work would be needed.

>
> David
> ---
> diff --git a/drivers/media/dvb-core/dvbdev.c b/drivers/media/dvb-core/dvbdev.c
> index b7171bf094fb..edbfa5549994 100644
> --- a/drivers/media/dvb-core/dvbdev.c
> +++ b/drivers/media/dvb-core/dvbdev.c
> @@ -450,6 +450,23 @@ static int dvb_register_media_device(struct dvb_device *dvbdev,
> return 0;
> }
>
> +static ssize_t dvb_mac_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct dvb_device *dvbdev = dev_get_drvdata(dev);
> +
> + return sprintf(buf, "%pM\n", dvbdev->adapter->proposed_mac);
> +}
> +static DEVICE_ATTR_RO(dvb_mac);
> +
> +static struct attribute *dvb_device_attrs[] = {
> + &dev_attr_dvb_mac.attr,
> + NULL
> +};
> +static const struct attribute_group dvb_device_attr_grp = {
> + .attrs = dvb_device_attrs,
> +};
> +
> int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
> const struct dvb_device *template, void *priv,
> enum dvb_device_type type, int demux_sink_pads)
> @@ -533,6 +550,14 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
>
> mutex_unlock(&dvbdev_register_lock);
>
> + if (adap->proposed_mac[0] || adap->proposed_mac[1] ||
> + adap->proposed_mac[2] || adap->proposed_mac[3] ||
> + adap->proposed_mac[4] || adap->proposed_mac[5]) {
> + dvbdev->sysfs_groups[0] = &dvb_device_attr_grp;
> + dvbdev->sysfs_groups[1] = NULL;
> + adap->device->groups = dvbdev->sysfs_groups;
> + }
> +
> clsdev = device_create(dvb_class, adap->device,
> MKDEV(DVB_MAJOR, minor),
> dvbdev, "dvb%d.%s%d", adap->num, dnames[type], id);
> @@ -1010,6 +1035,31 @@ void dvb_module_release(struct i2c_client *client)
> EXPORT_SYMBOL_GPL(dvb_module_release);
> #endif
>
> +static ssize_t dvb_adapter_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct dvb_device *dvbdev = dev_get_drvdata(dev);
> +
> + return sprintf(buf, "%d\n", dvbdev->adapter->num);
> +}
> +static DEVICE_ATTR_RO(dvb_adapter);
> +
> +static ssize_t dvb_type_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct dvb_device *dvbdev = dev_get_drvdata(dev);
> +
> + return sprintf(buf, "%s\n", dnames[dvbdev->type]);
> +}
> +static DEVICE_ATTR_RO(dvb_type);
> +
> +static struct attribute *dvb_class_attrs[] = {
> + &dev_attr_dvb_adapter.attr,
> + &dev_attr_dvb_type.attr,
> + NULL
> +};
> +ATTRIBUTE_GROUPS(dvb_class);
> +
> static int dvb_uevent(struct device *dev, struct kobj_uevent_env *env)
> {
> struct dvb_device *dvbdev = dev_get_drvdata(dev);
> @@ -1050,6 +1100,7 @@ static int __init init_dvbdev(void)
> retval = PTR_ERR(dvb_class);
> goto error;
> }
> + dvb_class->dev_groups = dvb_class_groups,
> dvb_class->dev_uevent = dvb_uevent;
> dvb_class->devnode = dvb_devnode;
> return 0;
> diff --git a/include/media/dvbdev.h b/include/media/dvbdev.h
> index 881ca461b7bb..d6becdd2d56e 100644
> --- a/include/media/dvbdev.h
> +++ b/include/media/dvbdev.h
> @@ -127,6 +127,7 @@ struct dvb_adapter {
> *
> * @list_head: List head with all DVB devices
> * @fops: pointer to struct file_operations
> + * @sysfs_groups: Additional sysfs attributes
> * @adapter: pointer to the adapter that holds this device node
> * @type: type of the device, as defined by &enum dvb_device_type.
> * @minor: devnode minor number. Major number is always DVB_MAJOR.
> @@ -157,6 +158,7 @@ struct dvb_adapter {
> struct dvb_device {
> struct list_head list_head;
> const struct file_operations *fops;
> + const struct attribute_group *sysfs_groups[2];
> struct dvb_adapter *adapter;
> enum dvb_device_type type;
> int minor;



Thanks,
Mauro

\
 
 \ /
  Last update: 2018-10-31 17:13    [W:1.446 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site