lkml.org 
[lkml]   [2018]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v1 00/14] Rockchip SPI cleanup and use interrupts
Date
Am Mittwoch, 31. Oktober 2018, 11:56:57 CET schrieb Emil Renner Berthing:
> Emil Renner Berthing (14):
> spi: rockchip: make spi_enable_chip take bool
> spi: rockchip: use designated init for dma config
> spi: rockchip: always use SPI mode
> spi: rockchip: use atomic_t state
> spi: rockchip: disable spi on error
> spi: rockchip: read transfer info directly
> spi: rockchip: don't store dma channels twice
> spi: rockchip: remove master pointer from dev data
> spi: rockchip: simplify use_dma logic
> spi: rockchip: set min/max speed
> spi: rockchip: precompute rx sample delay
> spi: rockchip: use irq rather than polling
> spi: rockchip: support 4bit words
> spi: rockchip: support lsb-first mode

The series, on rk3288 with cros-ec and spi-flash, rk3328 with a spi-flash,
rk3399 with cros-ec and spi-flash:

Tested-by: Heiko Stuebner <heiko@sntech.de>



\
 
 \ /
  Last update: 2018-10-31 12:20    [W:0.114 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site