lkml.org 
[lkml]   [2018]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 02/14] spi: rockchip: use designated init for dma config
Date
From: Emil Renner Berthing <kernel@esmil.dk>

Use C99 designated initializers for dma slave config
structures. This also makes sure uninitialized fields
are zeroed so we don't need an explicit memset.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
---
drivers/spi/spi-rockchip.c | 26 ++++++++++++++------------
1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index 7e54e1a69cc8..87d1b9837d94 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -442,12 +442,8 @@ static void rockchip_spi_dma_txcb(void *data)
static int rockchip_spi_prepare_dma(struct rockchip_spi *rs)
{
unsigned long flags;
- struct dma_slave_config rxconf, txconf;
struct dma_async_tx_descriptor *rxdesc, *txdesc;

- memset(&rxconf, 0, sizeof(rxconf));
- memset(&txconf, 0, sizeof(txconf));
-
spin_lock_irqsave(&rs->lock, flags);
rs->state &= ~RXBUSY;
rs->state &= ~TXBUSY;
@@ -455,10 +451,13 @@ static int rockchip_spi_prepare_dma(struct rockchip_spi *rs)

rxdesc = NULL;
if (rs->rx) {
- rxconf.direction = DMA_DEV_TO_MEM;
- rxconf.src_addr = rs->dma_rx.addr;
- rxconf.src_addr_width = rs->n_bytes;
- rxconf.src_maxburst = 1;
+ struct dma_slave_config rxconf = {
+ .direction = DMA_DEV_TO_MEM,
+ .src_addr = rs->dma_rx.addr,
+ .src_addr_width = rs->n_bytes,
+ .src_maxburst = 1,
+ };
+
dmaengine_slave_config(rs->dma_rx.ch, &rxconf);

rxdesc = dmaengine_prep_slave_sg(
@@ -474,10 +473,13 @@ static int rockchip_spi_prepare_dma(struct rockchip_spi *rs)

txdesc = NULL;
if (rs->tx) {
- txconf.direction = DMA_MEM_TO_DEV;
- txconf.dst_addr = rs->dma_tx.addr;
- txconf.dst_addr_width = rs->n_bytes;
- txconf.dst_maxburst = rs->fifo_len / 2;
+ struct dma_slave_config txconf = {
+ .direction = DMA_MEM_TO_DEV,
+ .dst_addr = rs->dma_tx.addr,
+ .dst_addr_width = rs->n_bytes,
+ .dst_maxburst = rs->fifo_len / 2,
+ };
+
dmaengine_slave_config(rs->dma_tx.ch, &txconf);

txdesc = dmaengine_prep_slave_sg(
--
2.19.1
\
 
 \ /
  Last update: 2018-10-31 12:00    [W:0.109 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site