lkml.org 
[lkml]   [2018]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v6 6/6] power: supply: Add Spreadtrum SC27XX fuel gauge unit driver
On Mon, Oct 22, 2018 at 9:44 AM Baolin Wang <baolin.wang@linaro.org> wrote:

> This patch adds the Spreadtrum SC27XX serial PMICs fuel gauge support,
> which is used to calculate the battery capacity.
>
> Original-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com>
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> Changes from v5:
> - Save the OCV values in micro volts for OCV capacity table.
> - Use devm_kmemdup() instead of devm_kzalloc() in sc27xx_fgu_hw_init()

Hi Baolin, you can keep my ACK, just adding some nitpicking:

> +struct sc27xx_fgu_data {
> + struct regmap *regmap;
> + struct device *dev;
> + struct power_supply *battery;
> + u32 base;
> + struct mutex lock;
> + struct gpio_desc *gpiod;
> + struct iio_channel *channel;
> + bool bat_present;
> + int internal_resist;
> + int total_cap;
> + int init_cap;
> + int init_clbcnt;
> + int max_volt;
> + int table_len;

Can the above really be negative or should these int:s really
be unsigned int?

> +static int sc27xx_fgu_adc_to_current(int adc)
> +{
> + return (adc * 1000) / SC27XX_FGU_1000MA_ADC;
> +}
> +
> +static int sc27xx_fgu_adc_to_voltage(int adc)
> +{
> + return (adc * 1000) / SC27XX_FGU_1000MV_ADC;
> +}

Would you maybe use
DIV_ROUND_CLOSEST(adc*1000, SC27XX_FGU_1000MV_ADC)
on these?

Overall this is a very fine driver and really pretty compared to some
other stuff we have in drivers/power.

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2018-10-31 09:57    [W:0.116 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site