lkml.org 
[lkml]   [2018]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 3/4] arm64: dts: qcom: qcs404: Add tsens controller
On 16-10-18, 00:10, Amit Kucheria wrote:
> qcs404 has a single TSENS IP block with 10 sensors. The calibration data
> is stored in an eeprom (qfprom) that is accessed through the nvmem
> framework. We add the qfprom node to allow the tsens sensors to be
> calibrated correctly.

Andy,

These have dependency on the patch series adding The DT file I sent
yesterday[1]. Please apply these on top of that series

[1]: https://patchwork.kernel.org/project/linux-arm-msm/list/?series=36319

Thanks

>
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/qcs404.dtsi | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> index e1e2ba9cbfcd..dfd65c53cf5f 100644
> --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> @@ -273,6 +273,26 @@
> status = "okay";
> };
>
> + qfprom: qfprom@a4000 {
> + compatible = "qcom,qfprom";
> + reg = <0xa4000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + tsens_caldata: caldata@d0 {
> + reg = <0x1f8 0x14>;
> + };
> + };
> +
> + tsens: thermal-sensor@4a9000 {
> + compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
> + reg = <0x4a9000 0x1000>, /* TM */
> + <0x4a8000 0x1000>; /* SROT */
> + nvmem-cells = <&tsens_caldata>;
> + nvmem-cell-names = "calib";
> + #qcom,sensors = <10>;
> + #thermal-sensor-cells = <1>;
> + };
> +
> apcs_glb: mailbox@b011000 {
> compatible = "qcom,qcs404-apcs-apps-global", "syscon";
> reg = <0xb011000 0x1000>;
> --
> 2.17.1

--
~Vinod

\
 
 \ /
  Last update: 2018-10-31 08:49    [W:0.065 / U:0.808 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site