lkml.org 
[lkml]   [2018]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v3 0/4] drivers: soc: xilinx: Add support for ZynqMP power domain driver
Date
Hi Rob,

> -----Original Message-----
> From: Rob Herring [mailto:robh@kernel.org]
> Sent: 12 October 2018 08:23 PM
> To: Jolly Shah <JOLLYS@xilinx.com>
> Cc: matthias.bgg@gmail.com; andy.gross@linaro.org; shawnguo@kernel.org;
> geert+renesas@glider.be; bjorn.andersson@linaro.org; sean.wang@mediatek.com;
> m.szyprowski@samsung.com; Michal Simek <michals@xilinx.com>;
> mark.rutland@arm.com; devicetree@vger.kernel.org; Rajan Vaja
> <RAJANV@xilinx.com>; linux-kernel@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org
> Subject: Re: [PATCH v3 0/4] drivers: soc: xilinx: Add support for ZynqMP power
> domain driver
>
> On Wed, Oct 10, 2018 at 06:41:44PM +0000, Jolly Shah wrote:
> > Ping for comments
>
> Please see my comments on other ZynqMP firmware patches. In summary, I
> need to see a complete binding, not piecemeal additions.
[Rajan] Based on your suggestion to have complete zynqmp firmware binding, we can
have two options:

1. Use firmware node instead of having separate subnodes for dependent
drivers(genpd, reset, nvmem, etc). In this case, firmware driver
needs to take care of probing of depedent drivers. We have thought of
MFD approach to probe depedent drivers. Firmware driver would register
depedent drivers as MFD child devices from firmware probe.

firmware {
zynqmp_firmware: zynqmp-firmware {
compatible = "xlnx,zynqmp-firmware";
method = "smc";
#power-domain-cells = <1>;
};
};

sata {
...
power-domains = <&zynqmp_firmware 2>;
...
};

drivers/firmware/xilinx/zynqmp.c: zynqmp_firmware_probe(struct platform_device *pdev)
static const struct mfd_cell firmware_devs[] = {
{
.name = "zynqmp_power_controller",
},
};

ret = mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE, firmware_devs,
ARRAY_SIZE(firmware_devs), NULL, 0, NULL);

2. Keep separate node for each device outside (in parralel to) zynqmp-firmware node.
In this case, each firmware driver consumer is independet driver/binding.
Order of probe can be taken care by -EPROBE defer mechanism.

Example:
firmware {
zynqmp_firmware: zynqmp-firmware {
compatible = "xlnx,zynqmp-firmware";
method = "smc";
};
};

zynqmp_power_domains: zynqmp-power-domains {
...
compatible = "xlnx,zynqmp-genpd";
#power-domain-cells = <1>;
...
};

sata {
...
power-domains = <&zynqmp_power_domains 2>;
...
};

Please let us know your inputs and suggest better approach so we can submit
changes accordingly.

Thanks,
Rajan
>
> Rob
>
> >
> > Thanks,
> > Jolly Shah
> >
> > > -----Original Message-----
> > > From: Jolly Shah [mailto:jolly.shah@xilinx.com]
> > > Sent: Thursday, October 04, 2018 2:24 PM
> > > To: matthias.bgg@gmail.com; andy.gross@linaro.org; shawnguo@kernel.org;
> > > geert+renesas@glider.be; bjorn.andersson@linaro.org;
> > > sean.wang@mediatek.com; m.szyprowski@samsung.com; Michal Simek
> > > <michals@xilinx.com>; robh+dt@kernel.org; mark.rutland@arm.com
> > > Cc: Rajan Vaja <RAJANV@xilinx.com>; devicetree@vger.kernel.org; linux-arm-
> > > kernel@lists.infradead.org; linux-kernel@vger.kernel.org; Jolly Shah
> > > <JOLLYS@xilinx.com>
> > > Subject: [PATCH v3 0/4] drivers: soc: xilinx: Add support for ZynqMP power
> > > domain driver
> > >
> > > The zynqmp power domain driver communicates the usage requirements for
> > > logical power domains / devices to the platform FW.
> > > FW is responsible for choosing appropriate power states, taking Linux' usage
> > > information into account.
> > >
> > > This patch series is based on top of Xilinx firmware patch set:
> > > https://patchwork.kernel.org/cover/10555405/
> > >
> > > v3:
> > > - Changed binding to have FW node as a power controller as suggested by Rob
> > > - Updated FW driver to register it as mfd child devices from firmware probe
> > > - Move bindings location as suggested
> > >
> > > v2:
> > > - Rebased on top of latest firmware driver patch series
> > > - Updated driver name from zynqmp-genpd to zynqmp-power-controller
> > > - Updated device tree bindings to move power controller node under firmware
> > > node
> > >
> > > Jolly Shah (1):
> > > drivers: soc: xilinx: Add ZynqMP power domain driver
> > >
> > > Rajan Vaja (3):
> > > dt-bindings: power: Add ZynqMP power domain bindings
> > > firmware: xilinx: Add APIs to control node status/power
> > > firmware: xilinx: Add node IDs for zynqmp firmware
> > >
> > > .../bindings/power/xlnx,zynqmp-genpd.txt | 34 ++
> > > drivers/firmware/xilinx/Kconfig | 1 +
> > > drivers/firmware/xilinx/zynqmp.c | 73 ++++
> > > drivers/soc/xilinx/Kconfig | 9 +
> > > drivers/soc/xilinx/Makefile | 2 +
> > > drivers/soc/xilinx/zynqmp_pm_domains.c | 403
> > > +++++++++++++++++++++
> > > include/dt-bindings/power/xlnx-zynqmp-power.h | 39 ++
> > > include/linux/firmware/xlnx-zynqmp.h | 98 +++++
> > > 8 files changed, 659 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/power/xlnx,zynqmp-
> > > genpd.txt
> > > create mode 100644 drivers/soc/xilinx/zynqmp_pm_domains.c
> > > create mode 100644 include/dt-bindings/power/xlnx-zynqmp-power.h
> > >
> > > --
> > > 2.7.4
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

\
 
 \ /
  Last update: 2018-10-29 15:28    [W:0.085 / U:1.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site