lkml.org 
[lkml]   [2018]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [LINUX PATCH v11 0/3] Add support for Arasan NAND Flash controller
Hi Naga,

Naga Sureshkumar Relli <nagasure@xilinx.com> wrote on Mon, 29 Oct 2018
13:05:47 +0000:

> Hi Miquel,
>
> > -----Original Message-----
> > From: Miquel Raynal [mailto:miquel.raynal@bootlin.com]
> > Sent: Monday, October 29, 2018 3:21 PM
> > To: Naga Sureshkumar Relli <nagasure@xilinx.com>
> > Cc: boris.brezillon@bootlin.com; richard@nod.at; dwmw2@infradead.org;
> > computersforpeace@gmail.com; marek.vasut@gmail.com; linux-mtd@lists.infradead.org;
> > linux-kernel@vger.kernel.org; Michal Simek <michals@xilinx.com>;
> > nagasuresh12@gmail.com
> > Subject: Re: [LINUX PATCH v11 0/3] Add support for Arasan NAND Flash controller
> >
> > Hi Naga,
> >
> > Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com> wrote on Tue, 25 Sep 2018
> > 17:50:28 +0530:
> >
> > > This patch series adds the basic driver support for Arasan NAND Flash controller.
> > > We are reinitiating the patch series by fixing the comments given by Miquel and Boris.
> > > Major changes are exec_op() implementation related.
> > > Rebased to 4.19 nand tree.
> > > Tested MT29F32G08ABCDBJ4.
> > >
> > > As suggested by Boris, it also adds a new varaible called mode in
> > > struct nand_sdr_timings, which will give directly the sdr operating
> > > mode. and it is useful for some controllers, where we can configure
> > > direclty the operating mode instead of timings.
> > >
> >
> > Unless I missed something there are still comments from Boris pending?
> > I will wait for your v12 to give this driver another shot.
> shall I send the v12 on top of nand/for-4.20?

Yes please, or wait for -rc1 to be out. There is no rush.


Thanks,
Miquèl

\
 
 \ /
  Last update: 2018-10-29 14:22    [W:0.099 / U:11.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site