lkml.org 
[lkml]   [2018]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 16/25] drm/sun4i: sun6i_mipi_dsi: Add support for VCC-DSI voltage regulator
On Fri, Oct 26, 2018 at 08:13:35PM +0530, Jagan Teki wrote:
> Some boards have VCC-DSI pin connected to voltage regulator which may
> not be turned on by default.
>
> Add support for such boards by adding voltage regulator handling code to
> MIPI DSI driver.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v3:
> - new patch
> Changes for v2:
> - none
>
> drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 14 ++++++++++++++
> drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 3 +++
> 2 files changed, 17 insertions(+)
>
> diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> index 42bd7506abaf..bc57343592e0 100644
> --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> @@ -949,6 +949,12 @@ static int sun6i_dsi_bind(struct device *dev, struct device *master,
>
> dsi->drv = drv;
>
> + ret = regulator_enable(dsi->regulator);
> + if (ret) {
> + dev_err(dev, "Failed to enable regulator\n");
> + return ret;
> + }
> +

The regulator should be enabled only when the device is in use.

> drm_encoder_helper_add(&dsi->encoder,
> &sun6i_dsi_enc_helper_funcs);
> ret = drm_encoder_init(drm,
> @@ -980,6 +986,7 @@ static int sun6i_dsi_bind(struct device *dev, struct device *master,
>
> err_cleanup_connector:
> drm_encoder_cleanup(&dsi->encoder);
> + regulator_disable(dsi->regulator);
> return ret;
> }
>
> @@ -989,6 +996,7 @@ static void sun6i_dsi_unbind(struct device *dev, struct device *master,
> struct sun6i_dsi *dsi = dev_get_drvdata(dev);
>
> drm_panel_detach(dsi->panel);
> + regulator_disable(dsi->regulator);
> }
>
> static const struct component_ops sun6i_dsi_ops = {
> @@ -1022,6 +1030,12 @@ static int sun6i_dsi_probe(struct platform_device *pdev)
> return PTR_ERR(base);
> }
>
> + dsi->regulator = devm_regulator_get(dev, "vcc-dsi");
> + if (IS_ERR(dsi->regulator)) {
> + dev_err(dev, "Couldn't get regulator\n");
> + return PTR_ERR(dsi->regulator);
> + }
> +

You haven't updated the DT bindings accordingly.

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-10-29 10:33    [W:0.302 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site