lkml.org 
[lkml]   [2018]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 12/25] drm/sun4i: sun6i_mipi_dsi: Add DSI hblk packet overhead
On Fri, Oct 26, 2018 at 08:13:31PM +0530, Jagan Teki wrote:
> Add 10 bytes packet overhead for hblk where blank is set using
> a blanking packet like (4 bytes + 4 bytes + payload + 2 bytes)
>
> This is according to BSP code from BPI-M64-bsp
> (in drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c)
> dsi_hblk = (ht-hspw)*dsi_pixel_bits[format]/8-(4+4+2);
>
> So, add 10 bytes packet overhead for DSI hblk.
>
> Tested on 2-lane, 4-lane MIPI-DSI LCD panels.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v3:
> - new patch
> Changes for v2:
> - none
>
> drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 9 +++++++--
> 1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> index 596e560263bf..cf42be1f1ba1 100644
> --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
> @@ -461,7 +461,7 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
> {
> struct mipi_dsi_device *device = dsi->device;
> unsigned int Bpp = mipi_dsi_pixel_format_to_bpp(device->format) / 8;
> - u16 hbp, hfp, hsa, hblk, vblk;
> + u16 hbp, hfp, hsa, hblk_max, hblk, vblk;
> size_t bytes;
> u8 *buffer;
>
> @@ -494,8 +494,13 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
>
> /*
> * hblk seems to be the line + porches length.
> + * The blank is set using a blanking packet (4 bytes + 4 bytes +
> + * payload + 2 bytes). So minimal size is 10 bytes
> */
> - hblk = (mode->htotal - (mode->hsync_end - mode->hsync_start)) * Bpp;
> +#define HBLK_PACKET_OVERHEAD 10
> + hblk_max = (mode->htotal - (mode->hsync_end - mode->hsync_start)) * Bpp;
> + hblk_max -= HBLK_PACKET_OVERHEAD;
> + hblk = max((unsigned int)HBLK_PACKET_OVERHEAD, hblk_max);

I'd rather use the same convention than the other assignments done
before in that function.

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2018-10-29 10:23    [W:1.648 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site