[lkml]   [2018]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v7 0/6] arm64: dts: NXP: add basic dts file for LX2160A SoC
Changes for v7:
- Comment for clock-frequency property fixed by bootloader

Changes for v6:
- Added comment for clock unit-sysclk node name in SoC device tree

Changes for v5:
- Updated temperature sensor regulator name in board device tree
- Sorted nodes alphabatically and unit-address in SoC/board device tree
- Identation, new line update in SoC/board device tree
- Updated nodes name as per DT spec generic name recommendation in SoC DT
- Updated macro define for interrupt/gpio property
- Updated i2c node property name scl-gpio
- Removed device_type property except cpu/memory node
- Added esdhc controller nodes in SoC/RDB board device tree
- Added aliases for uart/crypto nodes
- Add SoC die attribute definition for LX2160A

Changes for v4:
- Updated bindings for lx2160a clockgen and dcfg
- Modified commit message for lx2160a clockgen changes
- Updated interrupt property with macro definition
- Added required enable-method property to each core node with psci value
- Removed unused node syscon in device tree
- Removed blank lines in device tree fsl-lx2160a.dtsi
- Updated uart node compatible sbsa-uart first
- Added and defined vcc-supply property to temperature sensor node in
device tree fsl-lx2160a-rdb.dts

Changes for v3:
-Split clockgen support patch into below two patches:
- a)Updated array size of cmux_to_group[] with NUM_CMUX+1 to include -1
terminator and p4080 cmux_to_group[] array with -1 terminator
- b)Add clockgen support for lx2160a

Changes for v2:
- Modified cmux_to_group array to include -1 terminator
- Revert NUM_CMUX to original value 8 from 16
- Remove â LX2160A is 16 core, so modified value for NUM_CMUXX
in patch "[PATCH 3/5] drivers: clk-qoriq: Add clockgen support for
lx2160a" description
- Populated cache properties for L1 and L2 cache in lx2160a device-tree.
- Removed reboot node from lx2160a device-tree as PSCI is implemented.
- Removed incorrect comment for timer node interrupt property in
lx2160a device-tree.
- Modified pmu node compatible property from "arm,armv8-pmuv3" to
"arm,cortex-a72-pmu" in lx2160a device-tree
- Non-standard aliases removed in lx2160a rdb board device-tree
- Updated i2c child nodes to generic name in lx2160a rdb device-tree.

Changes for v1:
- Add compatible string for LX2160A clockgen support
- Add compatible string to initialize LX2160A guts driver
- Add compatible string for LX2160A support in dt-bindings
- Add dts file to enable support for LX2160A SoC and LX2160A RDB
(Reference design board)

Vabhav Sharma (4):
dt-bindings: arm64: add compatible for LX2160A
soc/fsl/guts: Add definition for LX2160A
arm64: dts: add QorIQ LX2160A SoC support
arm64: dts: add LX2160ARDB board support

Yogesh Gaur (2):
clk: qoriq: increase array size of cmux_to_group
clk: qoriq: Add clockgen support for lx2160a

Documentation/devicetree/bindings/arm/fsl.txt | 14 +-
.../devicetree/bindings/clock/qoriq-clock.txt | 1 +
arch/arm64/boot/dts/freescale/Makefile | 1 +
arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 119 ++++
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 766 +++++++++++++++++++++
drivers/clk/clk-qoriq.c | 16 +-
drivers/cpufreq/qoriq-cpufreq.c | 1 +
drivers/soc/fsl/guts.c | 6 +
8 files changed, 921 insertions(+), 3 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi


 \ /
  Last update: 2018-10-29 09:58    [W:0.099 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site