lkml.org 
[lkml]   [2018]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v2 05/16] remoteproc: modify rproc_handle_carveout to support preallocated region
Date


> -----Original Message-----
> From: Suman Anna <s-anna@ti.com>
> Sent: mardi 23 octobre 2018 19:40
> To: Loic PALLARDY <loic.pallardy@st.com>; Bjorn Andersson
> <bjorn.andersson@linaro.org>
> Cc: ohad@wizery.com; linux-remoteproc@vger.kernel.org; linux-
> kernel@vger.kernel.org; Arnaud POULIQUEN <arnaud.pouliquen@st.com>;
> benjamin.gaignard@linaro.org
> Subject: Re: [PATCH v2 05/16] remoteproc: modify rproc_handle_carveout to
> support preallocated region
>
> >>
> >> On Thu 30 Nov 08:46 PST 2017, Loic Pallardy wrote:
> >>
> >>> In current version rproc_handle_carveout function support only dynamic
> >>> region allocation.
> >>> This patch extends rproc_handle_carveout function to support different
> >> carveout
> >>> configurations:
> >>> - fixed DA and fixed PA: check if already part of pre-registered carveouts
> >>> (platform driver). If no, return error.
> >>> - fixed DA and any PA: check if already part of pre-allocated carveouts
> >>> (platform driver). If not found and rproc supports iommu, continue with
> >>> dynamic allocation (DA will be used for iommu programming), else
> return
> >>> error as no way to force DA.
> >>> - any DA and any PA: use original dynamic allocation
> >>>
> >>> Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
> >>> ---
> >>> drivers/remoteproc/remoteproc_core.c | 40
> >> ++++++++++++++++++++++++++++++++++++
> >>> 1 file changed, 40 insertions(+)
> >>>
> >>> diff --git a/drivers/remoteproc/remoteproc_core.c
> >> b/drivers/remoteproc/remoteproc_core.c
> >>> index 78525d1..515a17a 100644
> >>> --- a/drivers/remoteproc/remoteproc_core.c
> >>> +++ b/drivers/remoteproc/remoteproc_core.c
> >>> @@ -184,6 +184,10 @@ void *rproc_da_to_va(struct rproc *rproc, u64
> da,
> >> int len)
> >>> struct rproc_mem_entry *carveout;
> >>> void *ptr = NULL;
> >>>
> >>> + /*
> >>> + * da_to_va platform driver is deprecated. Driver should register
> >>> + * carveout thanks to rproc_add_carveout function
> >>> + */
> >>
> >> I think this comment is unrelated to the rest of this patch. I also
> >> think that at the end of the carveout-rework we should have a patch
> >> removing this ops.
> >
> > I'll remove this comment and add a da_to_va clean-up patch at the end of
> the series
>
> da_to_va platform ops is actually used to provide the remoteproc
> internal memory translations for the most part, not restricted just to
> fixed carveouts. Also, typically these do have multiple address-views -
> one the regular bus-address view, and another a remote processor address
> view.

da_to_va op sis still there. I was proposing to remove this ops as we were discussing to register all carveouts accessed by coprocessor in rproc core carveout list.
This will allow to centralize all carveout definitions and to see all memory resources viewed by coprocessor (va, pa and da) via debugfs...

Regards,
Loic
>
> regards
> Suman
>
> >
> >>
> >>> if (rproc->ops->da_to_va) {
> >>> ptr = rproc->ops->da_to_va(rproc, da, len);
> >>> if (ptr)
> >>> @@ -677,6 +681,7 @@ static int rproc_handle_carveout(struct rproc
> >> *rproc,
> >>> struct rproc_mem_entry *carveout, *mapping;
> >>> struct device *dev = &rproc->dev;
> >>> dma_addr_t dma;
> >>> + phys_addr_t pa;
> >>> void *va;
> >>> int ret;
> >>>
> >>> @@ -698,6 +703,41 @@ static int rproc_handle_carveout(struct rproc
> >> *rproc,
> >>> if (!carveout)
> >>> return -ENOMEM;
> >>>
> >>> + /* Check carveout rsc already part of a registered carveout */
> >>> + if (rsc->da != FW_RSC_ADDR_ANY) {
> >>
> >> As mentioned before, I consider it perfectly viable for rsc->da to be
> >> ANY and the driver providing a fixed carveout.
> >
> > Yes I'll change sequence to lookup by name first and then verify exact
> parameters matching , not only da definition.
> >
> >>
> >>> + va = rproc_find_carveout_by_da(rproc, rsc->da, rsc->len);
> >>> +
> >>> + if (va) {
> >>
> >> In a system with an iommu it's possible that rsc->len is larger than
> >> some carveout->len and va is NULL here so we fall through, allocate some
> >> memory and remap a segment of the carveout. (Or hopefully fails
> >> attempting).
> >>
> >>> + /* Registered region found */
> >>> + pa = rproc_va_to_pa(va);
> >>> + if (rsc->pa != FW_RSC_ADDR_ANY && rsc->pa !=
> >> (u32)pa) {
> >>> + /* Carveout doesn't match request */
> >>> + dev_err(dev->parent,
> >>> + "Failed to find carveout fitting da and
> >> pa\n");
> >>> + return -ENOMEM;
> >>> + }
> >>> +
> >>> + /* Update rsc table with physical address */
> >>> + rsc->pa = (u32)pa;
> >>> +
> >>> + /* Update carveouts list */
> >>> + carveout->va = va;
> >>> + carveout->len = rsc->len;
> >>> + carveout->da = rsc->da;
> >>> + carveout->priv = (void *)CARVEOUT_RSC;
> >>> +
> >>> + list_add_tail(&carveout->node, &rproc->carveouts);
> >>
> >> rproc_find_carveout_by_da() will return a reference into a carveout, now
> >> we add another overlapping carveout into the same list.
> >>
> >>
> >> I think it would be saner to not allow the resource table to describe
> >> subsets of carveouts registered by the driver.
> >>
> >> In which case this would better find a carveout by name or exact da,
> >> then check that the pa, da, len and rsc->flags are adequate.
> >
> > Agree
> > /Loic
> >>
> >>> +
> >>> + return 0;
> >>> + }
> >>> +
> >>> + if (!rproc->domain) {
> >>
> >> Currently this function ignore invalid values of da when !domain, so I
> >> think it would be good you can submit this sanity check in it's own
> >> patch so that anyone bisecting this would know why their broken
> firmware
> >> suddenly isn't loadable.
> >>
> >>> + dev_err(dev->parent,
> >>> + "Bad carveout rsc configuration\n");
> >>> + return -ENOMEM;
> >>> + }
> >>> + }
> >>> +
> >>
> >> Regards,
> >> Bjorn
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-remoteproc"
> in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >

\
 
 \ /
  Last update: 2018-10-23 21:10    [W:0.115 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site