lkml.org 
[lkml]   [2018]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V1 1/4] ARM: dts: imx6sx: Add flexcan stop mode wakeup support
Date
From: Dong Aisheng <aisheng.dong@nxp.com>

Add stop-mode property which is required by stop mode wakeup
feature.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
---
arch/arm/boot/dts/imx6sx.dtsi | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 844caa39364f..3f459d6da7fc 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -448,6 +448,7 @@
clocks = <&clks IMX6SX_CLK_CAN1_IPG>,
<&clks IMX6SX_CLK_CAN1_SERIAL>;
clock-names = "ipg", "per";
+ stop-mode = <&gpr 0x10 1 0x10 17>;
status = "disabled";
};

@@ -458,6 +459,7 @@
clocks = <&clks IMX6SX_CLK_CAN2_IPG>,
<&clks IMX6SX_CLK_CAN2_SERIAL>;
clock-names = "ipg", "per";
+ stop-mode = <&gpr 0x10 2 0x10 18>;
status = "disabled";
};

--
2.17.1
\
 
 \ /
  Last update: 2018-10-23 07:31    [W:3.335 / U:1.664 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site