lkml.org 
[lkml]   [2018]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/2] Add SECO Boards CEC device driver
Date
This series of patches aims to add CEC functionalities to SECO
devices, in particular UDOO X86.

The communication is achieved via Braswell SMBus (i2c-i801) to the
onboard STM32 microcontroller that handles the CEC signals. The driver
use direct access to the PCI addresses, due to the limitations of the
specific driver in presence of ACPI calls.

The basic functionalities are tested with success with cec-ctl and
cec-compliance.

Ettore Chimenti (2):
media: add SECO cec driver
seco-cec: add Consumer-IR support

MAINTAINERS | 6 +
drivers/media/platform/Kconfig | 21 +
drivers/media/platform/Makefile | 4 +
drivers/media/platform/seco-cec/Makefile | 1 +
drivers/media/platform/seco-cec/seco-cec.c | 859 +++++++++++++++++++++
drivers/media/platform/seco-cec/seco-cec.h | 143 ++++
6 files changed, 1034 insertions(+)
create mode 100644 drivers/media/platform/seco-cec/Makefile
create mode 100644 drivers/media/platform/seco-cec/seco-cec.c
create mode 100644 drivers/media/platform/seco-cec/seco-cec.h

--
2.18.0

\
 
 \ /
  Last update: 2018-10-02 19:07    [W:0.163 / U:10.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site