lkml.org 
[lkml]   [2018]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[V3, 1/4] Documentation: dt-bindings: phy: Document the Synopsys MIPI DPHY Rx bindings
Date
Add device-tree bindings documentation for SNPS DesignWare MIPI D-PHY in
RX mode.

Signed-off-by: Luis Oliveira <lolivei@synopsys.com>
---
Changelog
v2-V3
- removed gpios reference - it was for a separated driver
- changed address to show complete address

.../devicetree/bindings/phy/snps,dphy-rx.txt | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/snps,dphy-rx.txt

diff --git a/Documentation/devicetree/bindings/phy/snps,dphy-rx.txt b/Documentation/devicetree/bindings/phy/snps,dphy-rx.txt
new file mode 100644
index 0000000..03d17ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/snps,dphy-rx.txt
@@ -0,0 +1,28 @@
+Synopsys DesignWare MIPI Rx D-PHY block details
+
+Description
+-----------
+
+The Synopsys MIPI D-PHY controller supports MIPI-DPHY in receiver mode.
+Please refer to phy-bindings.txt for more information.
+
+Required properties:
+- compatible : Shall be "snps,dphy-rx".
+- #phy-cells : Must be 1.
+- snps,dphy-frequency : Output frequency of the D-PHY.
+- snps,dphy-te-len : Size of the communication interface (8 bits->8 or 12bits->12).
+- reg : Physical base address and size of the device memory mapped
+ registers;
+
+Example:
+
+ mipi_dphy_rx1: dphy@d00003040 {
+ compatible = "snps,dphy-rx";
+ #phy-cells = <1>;
+ snps,dphy-frequency = <300000>;
+ snps,dphy-te-len = <12>;
+ reg = < 0xd0003040 0x20
+ 0xd0008000 0x100
+ 0xd0009000 0x100>;
+ };
+
--
2.7.4
\
 
 \ /
  Last update: 2018-10-19 14:53    [W:0.268 / U:1.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site