lkml.org 
[lkml]   [2018]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [LINUX PATCH v11 3/3] mtd: rawnand: arasan: Add support for Arasan NAND Flash Controller
Date
Hi Boris,

Sorry for the late reply.
I am busy with some other work.

> -----Original Message-----
> From: Boris Brezillon [mailto:boris.brezillon@bootlin.com]
> Sent: Thursday, October 4, 2018 1:09 AM
> To: Naga Sureshkumar Relli <nagasure@xilinx.com>
> Cc: miquel.raynal@bootlin.com; richard@nod.at; dwmw2@infradead.org;
> computersforpeace@gmail.com; marek.vasut@gmail.com; Michal Simek
> <michals@xilinx.com>; linux-mtd@lists.infradead.org; linux-kernel@vger.kernel.org;
> nagasuresh12@gmail.com
> Subject: Re: [LINUX PATCH v11 3/3] mtd: rawnand: arasan: Add support for Arasan
> NAND Flash Controller
>
> Hi Naga,
>
> On Tue, 25 Sep 2018 17:50:31 +0530
> Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com> wrote:
>
> > +static int anfc_read_param_get_feature_sp_read_type_exec(struct nand_chip *chip,
> > + const struct nand_subop
> > + *subop)
> > +{
> > + const struct nand_op_instr *instr;
> > + struct anfc_nand_controller *nfc = to_anfc(chip->controller);
> > + unsigned int op_id, len;
> > + struct anfc_op nfc_op = {};
> > + struct mtd_info *mtd = nand_to_mtd(chip);
> > + struct anfc_nand_chip *achip = to_anfc_nand(chip);
> > + u32 dma_mode, addrcycles, write_size;
> > +
> > + anfc_parse_instructions(chip, subop, &nfc_op);
> > + instr = nfc_op.data_instr;
> > + op_id = nfc_op.data_instr_idx;
> > +
> > + if (nfc_op.cmds[0] == NAND_CMD_PARAM) {
> > + nfc->prog = PROG_RDPARAM;
> > + dma_mode = 0;
> > + addrcycles = 1;
> > + write_size = 0;
> > + }
> > + if (nfc_op.cmds[0] == NAND_CMD_GET_FEATURES) {
> > + nfc->prog = PROG_GET_FEATURE;
> > + dma_mode = 0;
> > + addrcycles = 1;
> > + write_size = 0;
> > + }
> > + if (nfc_op.cmds[0] == NAND_CMD_READ0) {
> > + nfc->prog = PROG_PGRD;
> > + addrcycles = achip->raddr_cycles + achip->caddr_cycles;
> > + write_size = mtd->writesize;
> > + dma_mode = 1;
> > + }
> > +
>
> Sorry, but I still don't understand why nfc->prog is different. Did you try using
> PROG_PGRD for all these ops? I mean, the sequence is the same, and you keep passing the
> opcode and the number of address cycles to the engine using other reg fields.
Yes, I tried it now with PROG_PGRD and I don't see any issues.
I will update the same in next version of patch.
Thanks for your suggestion.

>
> Also, you're not using the addrcycles info provided by the the address instruction and instead
> deduce it based on the opcode, which is wrong.
> To make it clearer, I'd like to avoid those nfc_op.cmds[0] == NAND_OPCODE tests,
> because it's exactly the kind of things we were trying to get rid off by introducing the -
> >exec_op() interface.
Ok. I understand, I will remove hardcoding the commands in the driver.
And I will change the driver to read addrcycles info from address instruction.

Thanks,
Naga Sureshkumar Relli
>
> > + anfc_prepare_cmd(nfc, nfc_op.cmds[0], 0, dma_mode, write_size,
> > + addrcycles);
> > + anfc_setpagecoladdr(nfc, nfc_op.row, nfc_op.col);
> > +
> > + if (!nfc_op.data_instr)
> > + return 0;
> > +
> > + len = nand_subop_get_data_len(subop, op_id);
> > + anfc_rw_pio_op(mtd, nfc->buf, roundup(len, 4), 1, nfc->prog, 1, 0);
> > + memcpy(instr->ctx.data.buf.in, nfc->buf, len);
> > +
> > + return 0;
> > +}

\
 
 \ /
  Last update: 2018-10-19 11:46    [W:0.085 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site