lkml.org 
[lkml]   [2018]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] smartpqi: Fix timeout of smartpqi probe stage
Just Ping.
This is a very serious issue. The OS boot from this raid controller
couldn't find bock devices after installing OS.

I think this patch should be merged asap.

Feng Li <lifeng1519@gmail.com> 于2018年10月12日周五 上午11:13写道:
>
> I use 'HPE Smart Array E208i-a SR Gen10 Controller', and pass through
> the SAS controller from ESXi 6.0U1 to VM, which is installed CentOS 7.4/7.5.
> The disk is not found.
>
> The error log is "controller not ready after 30 seconds."
>
> Add some logs, and could check the probe stage needs nearly 36s to match the
> status.
>
> Signed-off-by: Li Feng <fengli@smartx.com>
> ---
> drivers/scsi/smartpqi/smartpqi_sis.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/scsi/smartpqi/smartpqi_sis.c
> b/drivers/scsi/smartpqi/smartpqi_sis.c
> index 5141bd4c9..bc7efdacb 100644
> --- a/drivers/scsi/smartpqi/smartpqi_sis.c
> +++ b/drivers/scsi/smartpqi/smartpqi_sis.c
> @@ -59,7 +59,7 @@
>
> #define SIS_CTRL_KERNEL_UP 0x80
> #define SIS_CTRL_KERNEL_PANIC 0x100
> -#define SIS_CTRL_READY_TIMEOUT_SECS 30
> +#define SIS_CTRL_READY_TIMEOUT_SECS 90
> #define SIS_CTRL_READY_RESUME_TIMEOUT_SECS 90
> #define SIS_CTRL_READY_POLL_INTERVAL_MSECS 10
>
> --
> 2.11.0



--
Thanks and Best Regards,
Feng Li(Alex)

\
 
 \ /
  Last update: 2018-10-19 10:03    [W:0.037 / U:7.972 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site