lkml.org 
[lkml]   [2018]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 3/6] dt-bindings: power: Introduce properties to present the battery OCV capacity table
On 19 October 2018 at 00:51, Rob Herring <robh@kernel.org> wrote:
> On Mon, Oct 15, 2018 at 04:09:22PM +0800, Baolin Wang wrote:
>> Some battery driver will use the open circuit voltage (OCV) value to look
>> up the corresponding battery capacity percent in one certain degree Celsius.
>> Thus this patch provides some battery properties to present the OCV table
>> temperatures and OCV capacity table values.
>>
>> Suggested-by: Sebastian Reichel <sre@kernel.org>
>> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
>> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
>> ---
>> Changes from v3:
>> - Split binding into one separate patch.
>> - Rename ocv-capacity-table-temperatures to ocv-capacity-celsius.
>> - Add some words to specify the OCV's unit.
>>
>> Changes from v2:
>> - Use type __be32 to calculate the table length.
>> - Update error messages.
>> - Add some helper functions.
>>
>> Changes from v1:
>> - New patch in v2.
>> ---
>> .../devicetree/bindings/power/supply/battery.txt | 15 +++++++++++++++
>> 1 file changed, 15 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/power/supply/battery.txt b/Documentation/devicetree/bindings/power/supply/battery.txt
>> index 938d027..1f70e5d 100644
>> --- a/Documentation/devicetree/bindings/power/supply/battery.txt
>> +++ b/Documentation/devicetree/bindings/power/supply/battery.txt
>> @@ -23,6 +23,17 @@ Optional Properties:
>> - constant-charge-current-max-microamp: maximum constant input current
>> - constant-charge-voltage-max-microvolt: maximum constant input voltage
>> - factory-internal-resistance-micro-ohms: battery factory internal resistance
>> + - ocv-capacity-table-0: An array providing the battery capacity percent
>> + with corresponding open circuit voltage (OCV) of the battery, which
>> + is used to look up battery capacity according to current OCV value.
>> + And the open circuit voltage unit is microvolt.
>
> The order percent and voltage is still not clear. I'd guess one way
> based on the text here, but the example is the opposite. The description
> here must stand on its own.

Yes, you are right. I will correct the order of ocv-capacity-table-n. Thanks.

>> + - ocv-capacity-table-1: Same as ocv-capacity-table-0
>> + ......
>> + - ocv-capacity-table-n: Same as ocv-capacity-table-0
>> + - ocv-capacity-celsius: An array containing the temperature in degree Celsius,
>> + for each of the battery capacity lookup table. The first temperature value
>> + specifies the OCV table 0, and the second temperature value specifies the
>> + OCV table 1, and so on.
>>
>> Battery properties are named, where possible, for the corresponding
>> elements in enum power_supply_property, defined in
>> @@ -44,6 +55,10 @@ Example:
>> constant-charge-current-max-microamp = <900000>;
>> constant-charge-voltage-max-microvolt = <4200000>;
>> factory-internal-resistance-micro-ohms = <250000>;
>> + ocv-capacity-celsius = <(-10) 0 10>;
>> + ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>, ...;
>> + ocv-capacity-table-1 = <4200000 100>, <4185000 95>, <4113000 90>, ...;
>> + ocv-capacity-table-2 = <4250000 100>, <4200000 95>, <4185000 90>, ...;
>> };
>>
>> charger: charger@11 {
>> --
>> 1.7.9.5
>>



--
Baolin Wang
Best Regards

\
 
 \ /
  Last update: 2018-10-19 03:51    [W:0.048 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site