lkml.org 
[lkml]   [2018]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH] ata: add Buddha PATA controller driver
From
Date
Hi Bartlomiej,

On 19/10/18 01:29, Bartlomiej Zolnierkiewicz wrote:
> Add Buddha PATA controller driver. It enables libata support for
> the Buddha, Catweasel and X-Surf expansion boards on the Zorro
> expansion bus.
>
> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
> Cc: Michael Schmitz <schmitzmic@gmail.com>
> Cc: Geert Uytterhoeven <geert@linux-m68k.org>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> ---
> John, please test if possible..
>
> drivers/ata/Kconfig | 12 ++
> drivers/ata/Makefile | 1
> drivers/ata/pata_buddha.c | 257 ++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 270 insertions(+)
>
> Index: b/drivers/ata/Kconfig
> ===================================================================
> --- a/drivers/ata/Kconfig 2018-10-18 14:18:02.766452406 +0200
> +++ b/drivers/ata/Kconfig 2018-10-18 14:18:02.766452406 +0200
> @@ -965,6 +965,18 @@ config PATA_GAYLE
>
> If unsure, say N.
>
> +config PATA_BUDDHA
> + tristate "Buddha/Catweasel/X-Surf PATA support"
> + depends on ZORRO
> + help
> + This option enables support for the IDE interfaces
> + on the Buddha, Catweasel and X-Surf expansion boards
> + on the Zorro expansion bus. It supports up to two
> + interfaces on the Buddha, three on the Catweasel and
> + two on the X-Surf.
> +
> + If unsure, say N.
> +
> config PATA_ISAPNP
> tristate "ISA Plug and Play PATA support"
> depends on ISAPNP
> Index: b/drivers/ata/Makefile
> ===================================================================
> --- a/drivers/ata/Makefile 2018-10-18 14:18:02.766452406 +0200
> +++ b/drivers/ata/Makefile 2018-10-18 14:18:02.766452406 +0200
> @@ -98,6 +98,7 @@ obj-$(CONFIG_PATA_WINBOND) += pata_sl82c
> obj-$(CONFIG_PATA_CMD640_PCI) += pata_cmd640.o
> obj-$(CONFIG_PATA_FALCON) += pata_falcon.o
> obj-$(CONFIG_PATA_GAYLE) += pata_gayle.o
> +obj-$(CONFIG_PATA_BUDDHA) += pata_buddha.o
> obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o
> obj-$(CONFIG_PATA_IXP4XX_CF) += pata_ixp4xx_cf.o
> obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o
> Index: b/drivers/ata/pata_buddha.c
> ===================================================================
> --- /dev/null 1970-01-01 00:00:00.000000000 +0000
> +++ b/drivers/ata/pata_buddha.c 2018-10-18 14:23:41.054460925 +0200
> @@ -0,0 +1,257 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +/*
> + * Buddha, Catweasel and X-Surf PATA controller driver
> + *
> + * Copyright (c) 2018 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * Based on buddha.c:
> + *
> + * Copyright (C) 1997, 2001 by Geert Uytterhoeven and others
> + */
> +
> +#include <linux/ata.h>
> +#include <linux/blkdev.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/libata.h>
> +#include <linux/mm.h>
> +#include <linux/module.h>
> +#include <linux/zorro.h>
> +#include <scsi/scsi_cmnd.h>
> +#include <scsi/scsi_host.h>
> +
> +#include <asm/amigahw.h>
> +#include <asm/amigaints.h>
> +#include <asm/ide.h>
> +#include <asm/setup.h>
> +
> +#define DRV_NAME "pata_buddha"
> +#define DRV_VERSION "0.1.0"
> +
> +#define BUDDHA_BASE1 0x800
> +#define BUDDHA_BASE2 0xa00
> +#define BUDDHA_BASE3 0xc00
> +#define XSURF_BASE1 0xb000 /* 2.5" interface */
> +#define XSURF_BASE2 0xd000 /* 3.5" interface */
> +#define BUDDHA_CONTROL 0x11a
> +#define BUDDHA_IRQ 0xf00
> +#define XSURF_IRQ 0x7e
> +#define BUDDHA_IRQ_MR 0xfc0 /* master interrupt enable */
> +
> +enum {
> + BOARD_BUDDHA = 0,
> + BOARD_CATWEASEL,
> + BOARD_XSURF
> +};
> +
> +static unsigned int buddha_bases[3] __initdata = {
> + BUDDHA_BASE1, BUDDHA_BASE2, BUDDHA_BASE3
> +};
> +
> +static unsigned int xsurf_bases[2] __initdata = {
> + XSURF_BASE1, XSURF_BASE2
> +};
> +
> +static struct scsi_host_template pata_buddha_sht = {
> + ATA_PIO_SHT(DRV_NAME),
> +};
> +
> +/* FIXME: is this needed? */
> +static unsigned int pata_buddha_data_xfer(struct ata_queued_cmd *qc,
> + unsigned char *buf,
> + unsigned int buflen, int rw)
> +{
> + struct ata_device *dev = qc->dev;
> + struct ata_port *ap = dev->link->ap;
> + void __iomem *data_addr = ap->ioaddr.data_addr;
> + unsigned int words = buflen >> 1;
> +
> + /* Transfer multiple of 2 bytes */
> + if (rw == READ)
> + raw_insw((u16 *)data_addr, (u16 *)buf, words);
> + else
> + raw_outsw((u16 *)data_addr, (u16 *)buf, words);
> +
> + /* Transfer trailing byte, if any. */
> + if (unlikely(buflen & 0x01)) {
> + unsigned char pad[2] = { };
> +
> + /* Point buf to the tail of buffer */
> + buf += buflen - 1;
> +
> + if (rw == READ) {
> + raw_insw((u16 *)data_addr, (u16 *)pad, 1);
> + *buf = pad[0];
> + } else {
> + pad[0] = *buf;
> + raw_outsw((u16 *)data_addr, (u16 *)pad, 1);
> + }
> + words++;
> + }
> +
> + return words << 1;
> +}
> +
> +/*
> + * Provide our own set_mode() as we don't want to change anything that has
> + * already been configured..
> + */
> +static int pata_buddha_set_mode(struct ata_link *link,
> + struct ata_device **unused)
> +{
> + struct ata_device *dev;
> +
> + ata_for_each_dev(dev, link, ENABLED) {
> + /* We don't really care */
> + dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
> + dev->xfer_shift = ATA_SHIFT_PIO;
> + dev->flags |= ATA_DFLAG_PIO;
> + ata_dev_info(dev, "configured for PIO\n");
> + }
> + return 0;
> +}
> +
> +static bool pata_buddha_irq_check(struct ata_port *ap)
> +{
> + u8 ch;
> +
> + ch = z_readb((unsigned long)ap->private_data);
> +
> + return !!(ch & 0x80);
> +}
> +
> +static void pata_xsurf_irq_clear(struct ata_port *ap)
> +{
> + z_writeb(0, (unsigned long)ap->private_data);
> +}
> +
> +static struct ata_port_operations pata_buddha_ops = {
> + .inherits = &ata_sff_port_ops,
> + .sff_data_xfer = pata_buddha_data_xfer,
> + .sff_irq_check = pata_buddha_irq_check,
> + .cable_detect = ata_cable_unknown,
> + .set_mode = pata_buddha_set_mode,
> +};
> +
> +static struct ata_port_operations pata_xsurf_ops = {
> + .inherits = &ata_sff_port_ops,
> + .sff_data_xfer = pata_buddha_data_xfer,
> + .sff_irq_check = pata_buddha_irq_check,
> + .sff_irq_clear = pata_xsurf_irq_clear,
> + .cable_detect = ata_cable_unknown,
> + .set_mode = pata_buddha_set_mode,
> +};
> +
> +static int __init pata_buddha_init_one(void)

That's a misnomer - it'll pick up _all_ devices matching the search
criteria below:

> +{
> + struct zorro_dev *z = NULL;
> +
> + while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {

All Zorro devices ...
> + static const char *board_name[]
> + = { "Buddha", "Catweasel", "X-Surf" };
> + struct ata_host *host;
> + void __iomem *buddha_board;
> + unsigned long board;
> + unsigned int type, nr_ports = 2;
> + int i;
> +
> + if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) {
> + type = BOARD_BUDDHA;
> + } else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL) {
> + type = BOARD_CATWEASEL;
> + nr_ports++;
> + } else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF) {
> + type = BOARD_XSURF;

matching these three board IDs.

> + } else
> + continue;
> +
> + dev_info(&z->dev, "%s IDE controller\n", board_name[type]);
> +
> + board = z->resource.start;
> +
> + if (type != BOARD_XSURF) {
> + if (!devm_request_mem_region(&z->dev,
> + board + BUDDHA_BASE1,
> + 0x800, DRV_NAME))
> + continue;
> + } else {
> + if (!devm_request_mem_region(&z->dev,
> + board + XSURF_BASE1,
> + 0x1000, DRV_NAME))
> + continue;
> + if (!devm_request_mem_region(&z->dev,
> + board + XSURF_BASE2,
> + 0x1000, DRV_NAME))
> + continue;
> + }
> +
> + /* allocate host */
> + host = ata_host_alloc(&z->dev, nr_ports);
> + if (!host)
> + continue;
> +
> + buddha_board = ZTWO_VADDR(board);
> +
> + /* enable the board IRQ on Buddha/Catweasel */
> + if (type != BOARD_XSURF)
> + z_writeb(0, buddha_board + BUDDHA_IRQ_MR);
> +
> + for (i = 0; i < nr_ports; i++) {
> + struct ata_port *ap = host->ports[i];
> + void __iomem *base, *irqport;
> + unsigned long ctl = 0;
> +
> + if (type != BOARD_XSURF) {
> + ap->ops = &pata_buddha_ops;
> + base = buddha_board + buddha_bases[i];
> + ctl = BUDDHA_CONTROL;
> + irqport = buddha_board + BUDDHA_IRQ + i * 0x40;
> + } else {
> + ap->ops = &pata_xsurf_ops;
> + base = buddha_board + xsurf_bases[i];
> + /* X-Surf has no CS1* (Control/AltStat) */
> + irqport = buddha_board + XSURF_IRQ;
> + }
> +
> + ap->pio_mask = ATA_PIO4;
> + ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
> +
> + ap->ioaddr.data_addr = base;
> + ap->ioaddr.error_addr = base + 2 + 1 * 4;
> + ap->ioaddr.feature_addr = base + 2 + 1 * 4;
> + ap->ioaddr.nsect_addr = base + 2 + 2 * 4;
> + ap->ioaddr.lbal_addr = base + 2 + 3 * 4;
> + ap->ioaddr.lbam_addr = base + 2 + 4 * 4;
> + ap->ioaddr.lbah_addr = base + 2 + 5 * 4;
> + ap->ioaddr.device_addr = base + 2 + 6 * 4;
> + ap->ioaddr.status_addr = base + 2 + 7 * 4;
> + ap->ioaddr.command_addr = base + 2 + 7 * 4;
> +
> + if (ctl) {
> + ap->ioaddr.altstatus_addr = base + ctl;
> + ap->ioaddr.ctl_addr = base + ctl;
> + }
> +
> + ap->private_data = (void *)irqport;
> +
> + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", board,
> + ctl ? board + buddha_bases[i] + ctl : 0);
> + }
> +
> + ata_host_activate(host, IRQ_AMIGA_PORTS, ata_sff_interrupt,
> + IRQF_SHARED, &pata_buddha_sht);
> +
> + }
> +
> + return 0;
> +}
> +
> +module_init(pata_buddha_init_one);
> +
> +MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
> +MODULE_DESCRIPTION("low-level driver for Buddha/Catweasel/X-Surf PATA");
> +MODULE_LICENSE("GPL v2");
> +MODULE_VERSION(DRV_VERSION);
No module_exit().

Untested (stolen from pata_legacy.c):

commit 66a85e7f93a0144b2542b6c9944f5fb726b04662
Author: Michael Schmitz <schmitzmic@gmail.com>
Date:   Fri Oct 19 12:31:57 2018 +1300

    ata: pata_buddha - add module_exit()

    Note ata hosts as we probe, and use those in forgotten
module_exit() later.

    Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>

diff --git a/drivers/ata/pata_buddha.c b/drivers/ata/pata_buddha.c
index 11a8044..39582c0 100644
--- a/drivers/ata/pata_buddha.c
+++ b/drivers/ata/pata_buddha.c
@@ -59,6 +59,10 @@ enum {
        ATA_PIO_SHT(DRV_NAME),
 };

+#define NR_HOST 6
+static struct ata_host *buddha_host[NR_HOST];
+static int nr_buddha_host;
+
 /* FIXME: is this needed? */
 static unsigned int pata_buddha_data_xfer(struct ata_queued_cmd *qc,
                                         unsigned char *buf,
@@ -244,6 +248,7 @@ static int __init pata_buddha_init_one(void)
                ata_host_activate(host, IRQ_AMIGA_PORTS, ata_sff_interrupt,
                                  IRQF_SHARED, &pata_buddha_sht);

+               buddha_host[nr_buddha_host++] = host;
        }

        return 0;
@@ -251,6 +256,16 @@ static int __init pata_buddha_init_one(void)

 module_init(pata_buddha_init_one);

+static __exit void pata_buddha_exit_one(void)
+{
+       int i;
+
+       for (i = 0; i < nr_buddha_host; i++)
+               ata_host_detach(buddha_host[i]);
+}
+
+module_exit(pata_buddha_exit_one);
+

Cheers,

    Michael

\
 
 \ /
  Last update: 2018-10-19 01:51    [W:0.149 / U:0.876 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site