lkml.org 
[lkml]   [2018]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] net: ethernet: fec: Add missing SPEED_
Date
Since commit 58056c1e1b0e ("net: ethernet: Use phy_set_max_speed() to limit advertised speed"), the fec driver is unable to get any link.
This is due to missing SPEED_.

Fixes: 58056c1e1b0e ("net: ethernet: Use phy_set_max_speed() to limit advertised speed")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
drivers/net/ethernet/freescale/fec_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index a17cc97..75fd7c9 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1946,7 +1946,7 @@ static int fec_enet_mii_probe(struct net_device *ndev)

/* mask with MAC supported features */
if (fep->quirks & FEC_QUIRK_HAS_GBIT) {
- phy_set_max_speed(phy_dev, 1000);
+ phy_set_max_speed(phy_dev, SPEED_1000);
phy_remove_link_mode(phy_dev,
ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
#if !defined(CONFIG_M5272)
@@ -1954,7 +1954,7 @@ static int fec_enet_mii_probe(struct net_device *ndev)
#endif
}
else
- phy_set_max_speed(phy_dev, 100);
+ phy_set_max_speed(phy_dev, SPEED_100);

fep->link = 0;
fep->full_duplex = 0;
--
2.7.4
\
 
 \ /
  Last update: 2018-10-18 17:06    [W:0.086 / U:0.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site