lkml.org 
[lkml]   [2018]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] net: ethernet: fec: Add missing SPEED_
From
Date
On 10/18/2018 08:05 AM, Corentin Labbe wrote:
> Since commit 58056c1e1b0e ("net: ethernet: Use phy_set_max_speed() to limit advertised speed"), the fec driver is unable to get any link.
> This is due to missing SPEED_.

But SPEED_1000 is defined in include/uapi/linux/ethtool.h as 1000, so
surely this would amount to the same code paths being taken or am I
missing something here?

>
> Fixes: 58056c1e1b0e ("net: ethernet: Use phy_set_max_speed() to limit advertised speed")
> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> ---
> drivers/net/ethernet/freescale/fec_main.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
> index a17cc97..75fd7c9 100644
> --- a/drivers/net/ethernet/freescale/fec_main.c
> +++ b/drivers/net/ethernet/freescale/fec_main.c
> @@ -1946,7 +1946,7 @@ static int fec_enet_mii_probe(struct net_device *ndev)
>
> /* mask with MAC supported features */
> if (fep->quirks & FEC_QUIRK_HAS_GBIT) {
> - phy_set_max_speed(phy_dev, 1000);
> + phy_set_max_speed(phy_dev, SPEED_1000);
> phy_remove_link_mode(phy_dev,
> ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
> #if !defined(CONFIG_M5272)
> @@ -1954,7 +1954,7 @@ static int fec_enet_mii_probe(struct net_device *ndev)
> #endif
> }
> else
> - phy_set_max_speed(phy_dev, 100);
> + phy_set_max_speed(phy_dev, SPEED_100);
>
> fep->link = 0;
> fep->full_duplex = 0;
>


--
Florian

\
 
 \ /
  Last update: 2018-10-18 20:39    [W:0.142 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site