lkml.org 
[lkml]   [2018]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v8 00/10] Add the I3C subsystem
Hi Greg,

On Mon, 8 Oct 2018 12:47:21 +0200
Arnd Bergmann <arnd@arndb.de> wrote:

> On Wed, Oct 3, 2018 at 3:22 PM Boris Brezillon
> <boris.brezillon@bootlin.com> wrote:
> >
> > Sorry for the huge delay between v7 and v8 despite the small amount of
> > things I was asked to fix/rework.
> >
> > This patch series is adding a new subsystem to support I3C devices.
> >
> > This is just adding support for basic features. Extra features will
> > be added afterwards.
> >
> > There are a few design choices that are worth mentioning because they
> > impact the way I3C device drivers can interact with their devices:
> >
> > - all functions used to send I3C/I2C frames must be called in
> > non-atomic context. Mainly done this way to ease implementation, but
> > this is still open to discussion. Please let me know if you think it's
> > worth considering an asynchronous model here
> > - the I3C bus and I3C master controller are now tightly coupled even
> > though they're still allocated separately. There's now a 1:1
> > relationship between these objects, and the I3C master is no longer
> > represented under the I3C bus object.
> > Arnd, let me know if you had something different in mind, and I'll
> > rework the implementation accordingly.
>
> I looked at the entire series again and I'm rather happy with how
> it turned out. I've commented on a tiny issue about the readsl()
> that should be easy to resolve one way or another, with that
> you can add my
>
> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
>
> There is one additional issue that we've talked about previously
> and that I'd like to hear about from GregKH or maybe other
> subsystem maintainers: In the current version, you have a single
> 'bus_type' object, and this is used to represent both a 'host' and
> a 'device'. I think we concluded that this is done in other
> subsystems as well, and that this is fitting here because a
> host (master device) can hand over being a master to another
> device (slave), which then becomes the host and sees this
> one as a slave. Also a lot of the sysfs attributes are the same
> because of this relationship.
>
> It also means that you get a mix of things in sysfs:
>
> /sys/devices/i3c/<bus>
> /sys/devices/i3c/<device>
> /sys/devices/i3c/<bus>/<device>
>
> which is a bit like what we have on USB where we can have hub
> devices that are again parents of other USB devices, but I don't
> think we can have i3c hubs or multiplexers in the same way, so
> it's only a single level.
>
> I'm ok with this model after our previous discussion and couldn't
> come up with a better one. If anyone else still sees it as
> problematic and has a better idea, please let us know now.

I know you're quite busy with the 4.19 release, but if you find a bit
of time, that'd be great to have your feedback on this.

Thanks,

Boris

\
 
 \ /
  Last update: 2018-10-17 15:20    [W:0.183 / U:10.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site