lkml.org 
[lkml]   [2018]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH RFC 1/5] dt-bindings: power: supply: bq24190_charger: add bq24192 and usb-otg-vbus
On Mon, Oct 01, 2018 at 01:30:01AM -0400, Brian Masney wrote:
> Add support for the ti,bq24192 variant and a child node for the
> usb-otg-vbus regulator.
>
> Signed-off-by: Brian Masney <masneyb@onstation.org>
> ---
> Documentation/devicetree/bindings/power/supply/bq24190.txt | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.txt b/Documentation/devicetree/bindings/power/supply/bq24190.txt
> index 9e517d307070..8f2560824a97 100644
> --- a/Documentation/devicetree/bindings/power/supply/bq24190.txt
> +++ b/Documentation/devicetree/bindings/power/supply/bq24190.txt
> @@ -3,6 +3,7 @@ TI BQ24190 Li-Ion Battery Charger
> Required properties:
> - compatible: contains one of the following:
> * "ti,bq24190"
> + * "ti,bq24192"
> * "ti,bq24192i"
> - reg: integer, I2C address of the charger.
> - interrupts[-extended]: configuration for charger INT pin.
> @@ -19,6 +20,12 @@ Optional properties:
> - ti,system-minimum-microvolt: when power is connected and the battery is below
> minimum system voltage, the system will be regulated above this setting.
>
> +child nodes:
> +- usb-otg-vbus:
> + Usage: optional
> + Description: Regulator that is used to control the VBUS voltage direction for
> + either USB host mode or for charging on the OTG port.

What about the regulator properties?

> +
> Notes:
> - Some circuit boards wire the chip's "OTG" pin high (enabling 500mA default
> charge current on USB SDP ports, among other features). To simulate this on
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2018-10-15 20:53    [W:0.083 / U:3.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site