lkml.org 
[lkml]   [2018]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [V2, 2/5] Documentation: dt-bindings: Document the Synopsys MIPI DPHY Rx bindings
From
Date
Hi Rob,

On 12-Oct-18 17:45, Rob Herring wrote:
> On Thu, Sep 20, 2018 at 01:16:40PM +0200, Luis Oliveira wrote:
>> Add device-tree bindings documentation for SNPS DesignWare MIPI D-PHY in
>> RX mode.
>
> "dt-bindings: phy: ..." for the subject.
>
Yes, you are right.

>>
>> Signed-off-by: Luis Oliveira <lolivei@synopsys.com>
>> ---
>> Changelog
>> v2:
>> - no changes
>>
>> .../devicetree/bindings/phy/snps,dphy-rx.txt | 36 ++++++++++++++++++++++
>> 1 file changed, 36 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/phy/snps,dphy-rx.txt
>>
>> diff --git a/Documentation/devicetree/bindings/phy/snps,dphy-rx.txt b/Documentation/devicetree/bindings/phy/snps,dphy-rx.txt
>> new file mode 100644
>> index 0000000..9079f4a
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/phy/snps,dphy-rx.txt
>> @@ -0,0 +1,36 @@
>> +Synopsys DesignWare MIPI Rx D-PHY block details
>> +
>> +Description
>> +-----------
>> +
>> +The Synopsys MIPI D-PHY controller supports MIPI-DPHY in receiver mode.
>> +Please refer to phy-bindings.txt for more information.
>> +
>> +Required properties:
>> +- compatible : Shall be "snps,dphy-rx".
>> +- #phy-cells : Must be 1.
>> +- snps,dphy-frequency : Output frequency of the D-PHY.
>> +- snps,dphy-te-len : Size of the communication interface (8 bits->8 or 12bits->12).
>> +- reg : Physical base address and size of the device memory mapped
>> + registers;
>> +
>> +Optional properties:
>> +- snps,compat-mode : Compatibility mode control
>
> type? values?
>

I will remove this in V3.

>> +
>> +The per-board settings:
>> +- gpios : Synopsys testchip used as reference uses this to change setup
>> + configurations.
>
> Preferred to be named (e.g. foo-gpios). How many? What are their
> functions?
>

Ok, thanks for reviewing this.

>> +
>> +Example:
>> +
>> + mipi_dphy_rx1: dphy@3040 {
>> + compatible = "snps,dphy-rx";
>> + #phy-cells = <1>;
>> + snps,dphy-frequency = <300000>;
>> + snps,dphy-te-len = <12>;
>> + snps,compat-mode = <1>;
>> + reg = < 0x03040 0x20
>> + 0x08000 0x100
>> + 0x09000 0x100>;
>> + };
>> +
>> --
>> 2.9.3
>>

\
 
 \ /
  Last update: 2018-10-15 18:21    [W:0.074 / U:0.908 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site