lkml.org 
[lkml]   [2018]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 04/19] PCI: keystone: Do not initiate link training multiple times
Date
commit 886bc5ceb5cc3ad4b219502d72 ("PCI: designware: Add generic
dw_pcie_wait_for_link()") while adding a generic dw_pcie_wait_for_link()
performed a special handling (initiate link training multiple times) for
keystone which is not required. This also resulted in unncessarily waiting
for more time to establish the link even when no PCI device is connected.

Remove it and make it look similar to other dwc based PCIe drivers.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/pci/controller/dwc/pci-keystone.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index afb948372077..aa7e706fc37d 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -87,19 +87,17 @@ static int ks_pcie_establish_link(struct keystone_pcie *ks_pcie)
{
struct dw_pcie *pci = ks_pcie->pci;
struct device *dev = pci->dev;
- unsigned int retries;

if (dw_pcie_link_up(pci)) {
dev_info(dev, "Link already up\n");
return 0;
}

+ ks_dw_pcie_initiate_link_train(ks_pcie);
+
/* check if the link is up or not */
- for (retries = 0; retries < 5; retries++) {
- ks_dw_pcie_initiate_link_train(ks_pcie);
- if (!dw_pcie_wait_for_link(pci))
- return 0;
- }
+ if (!dw_pcie_wait_for_link(pci))
+ return 0;

dev_err(dev, "phy link never came up\n");
return -ETIMEDOUT;
--
2.17.1
\
 
 \ /
  Last update: 2018-10-15 15:10    [W:0.086 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site