lkml.org 
[lkml]   [2018]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 13/19] PCI: keystone: Cleanup configuration space access
Date
Cleanup configuration space access by removing ks_pcie_cfg_setup
which has an unncessary check of "if (bus == 0)" which will never be the
case of *_other_conf() and adding macros for configuring the CFG_SETUP
register required for accessing the configuration space of the device.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/pci/controller/dwc/pci-keystone.c | 70 +++++++----------------
1 file changed, 20 insertions(+), 50 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 891bdfc5921c..adf98dc0035c 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -45,7 +45,13 @@

/* Application registers */
#define CMD_STATUS 0x004
+
#define CFG_SETUP 0x008
+#define CFG_BUS(x) (((x) & 0xff) << 16)
+#define CFG_DEVICE(x) (((x) & 0x1f) << 8)
+#define CFG_FUNC(x) ((x) & 0x7)
+#define CFG_TYPE1 BIT(24)
+
#define OB_SIZE 0x030
#define CFG_PCIM_WIN_SZ_IDX 3
#define CFG_PCIM_WIN_CNT 32
@@ -364,60 +370,21 @@ static void ks_pcie_setup_rc_app_regs(struct keystone_pcie *ks_pcie)
ks_pcie_app_writel(ks_pcie, CMD_STATUS, OB_XLAT_EN_VAL | val);
}

-/**
- * ks_pcie_cfg_setup() - Set up configuration space address for a device
- *
- * @ks_pcie: ptr to keystone_pcie structure
- * @bus: Bus number the device is residing on
- * @devfn: device, function number info
- *
- * Forms and returns the address of configuration space mapped in PCIESS
- * address space 0. Also configures CFG_SETUP for remote configuration space
- * access.
- *
- * The address space has two regions to access configuration - local and remote.
- * We access local region for bus 0 (as RC is attached on bus 0) and remote
- * region for others with TYPE 1 access when bus > 1. As for device on bus = 1,
- * we will do TYPE 0 access as it will be on our secondary bus (logical).
- * CFG_SETUP is needed only for remote configuration access.
- */
-static void __iomem *ks_pcie_cfg_setup(struct keystone_pcie *ks_pcie, u8 bus,
- unsigned int devfn)
-{
- u8 device = PCI_SLOT(devfn), function = PCI_FUNC(devfn);
- struct dw_pcie *pci = ks_pcie->pci;
- struct pcie_port *pp = &pci->pp;
- u32 regval;
-
- if (bus == 0)
- return pci->dbi_base;
-
- regval = (bus << 16) | (device << 8) | function;
-
- /*
- * Since Bus#1 will be a virtual bus, we need to have TYPE0
- * access only.
- * TYPE 1
- */
- if (bus != 1)
- regval |= BIT(24);
-
- ks_pcie_app_writel(ks_pcie, CFG_SETUP, regval);
- return pp->va_cfg0_base;
-}
-
static int ks_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
unsigned int devfn, int where, int size,
u32 *val)
{
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
- u8 bus_num = bus->number;
- void __iomem *addr;
+ u32 reg;

- addr = ks_pcie_cfg_setup(ks_pcie, bus_num, devfn);
+ reg = CFG_BUS(bus->number) | CFG_DEVICE(PCI_SLOT(devfn)) |
+ CFG_FUNC(PCI_FUNC(devfn));
+ if (bus->parent->number != pp->root_bus_nr)
+ reg |= CFG_TYPE1;
+ ks_pcie_app_writel(ks_pcie, CFG_SETUP, reg);

- return dw_pcie_read(addr + where, size, val);
+ return dw_pcie_read(pp->va_cfg0_base + where, size, val);
}

static int ks_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus,
@@ -426,12 +393,15 @@ static int ks_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus,
{
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
- u8 bus_num = bus->number;
- void __iomem *addr;
+ u32 reg;

- addr = ks_pcie_cfg_setup(ks_pcie, bus_num, devfn);
+ reg = CFG_BUS(bus->number) | CFG_DEVICE(PCI_SLOT(devfn)) |
+ CFG_FUNC(PCI_FUNC(devfn));
+ if (bus->parent->number != pp->root_bus_nr)
+ reg |= CFG_TYPE1;
+ ks_pcie_app_writel(ks_pcie, CFG_SETUP, reg);

- return dw_pcie_write(addr + where, size, val);
+ return dw_pcie_write(pp->va_cfg0_base + where, size, val);
}

/**
--
2.17.1
\
 
 \ /
  Last update: 2018-10-15 15:10    [W:0.113 / U:1.768 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site