lkml.org 
[lkml]   [2018]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v1 2/2] drm/stm: ltdc: Solve issue on pixel clock & data enable polarity
Le lun. 24 sept. 2018 à 14:05, Yannick Fertré <yannick.fertre@st.com> a écrit :
>
> Wrong flags used for set the pixel clock & data enable polarities.
> Add trace for polarities of hsync, vsync, data enabled & pixel clock.
>
> Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
> ---
> drivers/gpu/drm/stm/ltdc.c | 23 +++++++++++++++++++----
> 1 file changed, 19 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
> index 808d9fb..f671abc 100644
> --- a/drivers/gpu/drm/stm/ltdc.c
> +++ b/drivers/gpu/drm/stm/ltdc.c
> @@ -517,7 +517,7 @@ static void ltdc_crtc_mode_set_nofb(struct drm_crtc *crtc)
> struct videomode vm;
> u32 hsync, vsync, accum_hbp, accum_vbp, accum_act_w, accum_act_h;
> u32 total_width, total_height;
> - u32 val;
> + u32 val = 0;
>
> drm_display_mode_to_videomode(mode, &vm);
>
> @@ -538,7 +538,22 @@ static void ltdc_crtc_mode_set_nofb(struct drm_crtc *crtc)
> total_height = accum_act_h + vm.vfront_porch;
>
> /* Configures the HS, VS, DE and PC polarities. Default Active Low */
> - val = 0;
> + if (vm.flags & DISPLAY_FLAGS_HSYNC_LOW)
> + DRM_DEBUG_DRIVER("Horizontal Synchronization polarity is active low");
> + if (vm.flags & DISPLAY_FLAGS_HSYNC_HIGH)
> + DRM_DEBUG_DRIVER("Horizontal Synchronization polarity is active high");
> + if (vm.flags & DISPLAY_FLAGS_VSYNC_LOW)
> + DRM_DEBUG_DRIVER("Vertical Synchronization polarity is active low");
> + if (vm.flags & DISPLAY_FLAGS_VSYNC_HIGH)
> + DRM_DEBUG_DRIVER("Vertical Synchronization polarity is active high");
> + if (vm.flags & DISPLAY_FLAGS_DE_LOW)
> + DRM_DEBUG_DRIVER("Data Enable polarity is active low");
> + if (vm.flags & DISPLAY_FLAGS_DE_HIGH)
> + DRM_DEBUG_DRIVER("Data Enable polarity is active high");
> + if (vm.flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
> + DRM_DEBUG_DRIVER("Pixel clock polarity is active low");
> + if (vm.flags & DISPLAY_FLAGS_PIXDATA_POSEDGE)
> + DRM_DEBUG_DRIVER("Pixel clock polarity is active high");
>
> if (vm.flags & DISPLAY_FLAGS_HSYNC_HIGH)
> val |= GCR_HSPOL;
> @@ -546,10 +561,10 @@ static void ltdc_crtc_mode_set_nofb(struct drm_crtc *crtc)
> if (vm.flags & DISPLAY_FLAGS_VSYNC_HIGH)
> val |= GCR_VSPOL;
>
> - if (vm.flags & DISPLAY_FLAGS_DE_HIGH)
> + if (vm.flags & DISPLAY_FLAGS_DE_LOW)
> val |= GCR_DEPOL;
>
> - if (vm.flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
> + if (vm.flags & DISPLAY_FLAGS_PIXDATA_POSEDGE)
> val |= GCR_PCPOL;
>
> reg_update_bits(ldev->regs, LTDC_GCR,
> --
> 2.7.4
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

\
 
 \ /
  Last update: 2018-10-15 13:16    [W:0.199 / U:4.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site