[lkml]   [2018]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2] platform/x86: Add Intel AtomISP2 dummy / power-management driver
On Sun, 14 Oct 2018 19:54:27 +0200
Hans de Goede <> wrote:

> The Image Signal Processor found on Cherry Trail devices is brought up in
> D0 state on devices which have camera sensors attached to it. The ISP will
> not enter D3 state again without some massaging of its registers beforehand
> and the ISP not being in D3 state blocks the SoC from entering S0ix modes.
> There was a driver for the ISP in drivers/staging but that got removed
> again because it never worked. It does not seem likely that a real
> driver for the ISP will be added to the mainline kernel anytime soon.
> This commit adds a dummy driver which contains the necessary magic from
> the staging driver to powerdown the ISP, so that Cherry Trail devices where
> the ISP is used will properly use S0ix modes when suspended.
> Together with other recent S0ix related fixes this allows S0ix modes to
> be entered on e.g. a Chuwi Hi8 Pro and a HP x2 210.
> BugLink:
> Signed-off-by: Hans de Goede <>

Reviewed-by: Alan Cox <>


 \ /
  Last update: 2018-10-15 12:31    [W:0.065 / U:1.924 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site