lkml.org 
[lkml]   [2018]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] powerpc/traps: fix machine check handlers to use pr_cont()
Date
When printing the machine check cause, the cause appears on the
following line due to bad use of printk without \n:

[ 33.663993] Machine check in kernel mode.
[ 33.664011] Caused by (from SRR1=9032):
[ 33.664036] Data access error at address c90c8000

This patch fixes it by using pr_cont() for the second part:

[ 133.258131] Machine check in kernel mode.
[ 133.258146] Caused by (from SRR1=9032): Data access error at address c90c8000

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
---
arch/powerpc/kernel/traps.c | 78 +++++++++++++++---------------
arch/powerpc/platforms/8xx/machine_check.c | 4 +-
2 files changed, 41 insertions(+), 41 deletions(-)

diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 4f880c2a6e4c..39fde4b40b6e 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -535,10 +535,10 @@ int machine_check_e500mc(struct pt_regs *regs)
printk("Caused by (from MCSR=%lx): ", reason);

if (reason & MCSR_MCP)
- printk("Machine Check Signal\n");
+ pr_cont("Machine Check Signal\n");

if (reason & MCSR_ICPERR) {
- printk("Instruction Cache Parity Error\n");
+ pr_cont("Instruction Cache Parity Error\n");

/*
* This is recoverable by invalidating the i-cache.
@@ -556,7 +556,7 @@ int machine_check_e500mc(struct pt_regs *regs)
}

if (reason & MCSR_DCPERR_MC) {
- printk("Data Cache Parity Error\n");
+ pr_cont("Data Cache Parity Error\n");

/*
* In write shadow mode we auto-recover from the error, but it
@@ -575,38 +575,38 @@ int machine_check_e500mc(struct pt_regs *regs)
}

if (reason & MCSR_L2MMU_MHIT) {
- printk("Hit on multiple TLB entries\n");
+ pr_cont("Hit on multiple TLB entries\n");
recoverable = 0;
}

if (reason & MCSR_NMI)
- printk("Non-maskable interrupt\n");
+ pr_cont("Non-maskable interrupt\n");

if (reason & MCSR_IF) {
- printk("Instruction Fetch Error Report\n");
+ pr_cont("Instruction Fetch Error Report\n");
recoverable = 0;
}

if (reason & MCSR_LD) {
- printk("Load Error Report\n");
+ pr_cont("Load Error Report\n");
recoverable = 0;
}

if (reason & MCSR_ST) {
- printk("Store Error Report\n");
+ pr_cont("Store Error Report\n");
recoverable = 0;
}

if (reason & MCSR_LDG) {
- printk("Guarded Load Error Report\n");
+ pr_cont("Guarded Load Error Report\n");
recoverable = 0;
}

if (reason & MCSR_TLBSYNC)
- printk("Simultaneous tlbsync operations\n");
+ pr_cont("Simultaneous tlbsync operations\n");

if (reason & MCSR_BSL2_ERR) {
- printk("Level 2 Cache Error\n");
+ pr_cont("Level 2 Cache Error\n");
recoverable = 0;
}

@@ -616,7 +616,7 @@ int machine_check_e500mc(struct pt_regs *regs)
addr = mfspr(SPRN_MCAR);
addr |= (u64)mfspr(SPRN_MCARU) << 32;

- printk("Machine Check %s Address: %#llx\n",
+ pr_cont("Machine Check %s Address: %#llx\n",
reason & MCSR_MEA ? "Effective" : "Physical", addr);
}

@@ -640,29 +640,29 @@ int machine_check_e500(struct pt_regs *regs)
printk("Caused by (from MCSR=%lx): ", reason);

if (reason & MCSR_MCP)
- printk("Machine Check Signal\n");
+ pr_cont("Machine Check Signal\n");
if (reason & MCSR_ICPERR)
- printk("Instruction Cache Parity Error\n");
+ pr_cont("Instruction Cache Parity Error\n");
if (reason & MCSR_DCP_PERR)
- printk("Data Cache Push Parity Error\n");
+ pr_cont("Data Cache Push Parity Error\n");
if (reason & MCSR_DCPERR)
- printk("Data Cache Parity Error\n");
+ pr_cont("Data Cache Parity Error\n");
if (reason & MCSR_BUS_IAERR)
- printk("Bus - Instruction Address Error\n");
+ pr_cont("Bus - Instruction Address Error\n");
if (reason & MCSR_BUS_RAERR)
- printk("Bus - Read Address Error\n");
+ pr_cont("Bus - Read Address Error\n");
if (reason & MCSR_BUS_WAERR)
- printk("Bus - Write Address Error\n");
+ pr_cont("Bus - Write Address Error\n");
if (reason & MCSR_BUS_IBERR)
- printk("Bus - Instruction Data Error\n");
+ pr_cont("Bus - Instruction Data Error\n");
if (reason & MCSR_BUS_RBERR)
- printk("Bus - Read Data Bus Error\n");
+ pr_cont("Bus - Read Data Bus Error\n");
if (reason & MCSR_BUS_WBERR)
- printk("Bus - Write Data Bus Error\n");
+ pr_cont("Bus - Write Data Bus Error\n");
if (reason & MCSR_BUS_IPERR)
- printk("Bus - Instruction Parity Error\n");
+ pr_cont("Bus - Instruction Parity Error\n");
if (reason & MCSR_BUS_RPERR)
- printk("Bus - Read Parity Error\n");
+ pr_cont("Bus - Read Parity Error\n");

return 0;
}
@@ -680,19 +680,19 @@ int machine_check_e200(struct pt_regs *regs)
printk("Caused by (from MCSR=%lx): ", reason);

if (reason & MCSR_MCP)
- printk("Machine Check Signal\n");
+ pr_cont("Machine Check Signal\n");
if (reason & MCSR_CP_PERR)
- printk("Cache Push Parity Error\n");
+ pr_cont("Cache Push Parity Error\n");
if (reason & MCSR_CPERR)
- printk("Cache Parity Error\n");
+ pr_cont("Cache Parity Error\n");
if (reason & MCSR_EXCP_ERR)
- printk("ISI, ITLB, or Bus Error on first instruction fetch for an exception handler\n");
+ pr_cont("ISI, ITLB, or Bus Error on first instruction fetch for an exception handler\n");
if (reason & MCSR_BUS_IRERR)
- printk("Bus - Read Bus Error on instruction fetch\n");
+ pr_cont("Bus - Read Bus Error on instruction fetch\n");
if (reason & MCSR_BUS_DRERR)
- printk("Bus - Read Bus Error on data load\n");
+ pr_cont("Bus - Read Bus Error on data load\n");
if (reason & MCSR_BUS_WRERR)
- printk("Bus - Write Bus Error on buffered store or cache line push\n");
+ pr_cont("Bus - Write Bus Error on buffered store or cache line push\n");

return 0;
}
@@ -705,30 +705,30 @@ int machine_check_generic(struct pt_regs *regs)
printk("Caused by (from SRR1=%lx): ", reason);
switch (reason & 0x601F0000) {
case 0x80000:
- printk("Machine check signal\n");
+ pr_cont("Machine check signal\n");
break;
case 0: /* for 601 */
case 0x40000:
case 0x140000: /* 7450 MSS error and TEA */
- printk("Transfer error ack signal\n");
+ pr_cont("Transfer error ack signal\n");
break;
case 0x20000:
- printk("Data parity error signal\n");
+ pr_cont("Data parity error signal\n");
break;
case 0x10000:
- printk("Address parity error signal\n");
+ pr_cont("Address parity error signal\n");
break;
case 0x20000000:
- printk("L1 Data Cache error\n");
+ pr_cont("L1 Data Cache error\n");
break;
case 0x40000000:
- printk("L1 Instruction Cache error\n");
+ pr_cont("L1 Instruction Cache error\n");
break;
case 0x00100000:
- printk("L2 data cache parity error\n");
+ pr_cont("L2 data cache parity error\n");
break;
default:
- printk("Unknown values in msr\n");
+ pr_cont("Unknown values in msr\n");
}
return 0;
}
diff --git a/arch/powerpc/platforms/8xx/machine_check.c b/arch/powerpc/platforms/8xx/machine_check.c
index 402016705a39..9944fc303df0 100644
--- a/arch/powerpc/platforms/8xx/machine_check.c
+++ b/arch/powerpc/platforms/8xx/machine_check.c
@@ -18,9 +18,9 @@ int machine_check_8xx(struct pt_regs *regs)
pr_err("Machine check in kernel mode.\n");
pr_err("Caused by (from SRR1=%lx): ", reason);
if (reason & 0x40000000)
- pr_err("Fetch error at address %lx\n", regs->nip);
+ pr_cont("Fetch error at address %lx\n", regs->nip);
else
- pr_err("Data access error at address %lx\n", regs->dar);
+ pr_cont("Data access error at address %lx\n", regs->dar);

#ifdef CONFIG_PCI
/* the qspan pci read routines can cause machine checks -- Cort
--
2.13.3
\
 
 \ /
  Last update: 2018-10-15 09:21    [W:0.046 / U:13.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site