lkml.org 
[lkml]   [2018]   [Oct]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] thermal: qoriq: add multiple sensors support
From
Date

Hi Yuantian,


On 27/09/2018 04:42, andy.tang@nxp.com wrote:
> From: Yuantian Tang <andy.tang@nxp.com>
>
> There is only one sensor supported in current driver.
> Multiple sensors are existing on Layscape socs. To support them,
> covert this driver to support multiple sensors.

s/covert/convert/

What about the following changelog ?

"
The QorIQ Layerscape SoC has several thermal sensors but the current
driver only supports one.

Massage the code to be sensor oriented and allow the support for
multiple sensors.
"

> Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
> ---
> drivers/thermal/qoriq_thermal.c | 117 +++++++++++++++++++++++----------------
> 1 files changed, 70 insertions(+), 47 deletions(-)
>
> diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
> index c866cc1..7c1e88a 100644
> --- a/drivers/thermal/qoriq_thermal.c
> +++ b/drivers/thermal/qoriq_thermal.c
> @@ -69,14 +69,21 @@ struct qoriq_tmu_regs {
> u32 ttr3cr; /* Temperature Range 3 Control Register */
> };
>
> +struct qoriq_tmu_data;
> +
> /*
> * Thermal zone data
> */
> +struct qoriq_sensor {
> + struct thermal_zone_device *tzd;
> + struct qoriq_tmu_data *qdata;
> + int id;
> +};

Can you move the qoriq_tmu_site_regs structure content inside the
qoriq_sensor structure and kill the 'sites' field in the qoriq_tmu_regs
structure ? Otherwise we end up with a SITES_MAX array in the
qoriq_tmu_data structure and another one in the qoriq_tmu_regs structure.

> struct qoriq_tmu_data {
> - struct thermal_zone_device *tz;
> struct qoriq_tmu_regs __iomem *regs;
> - int sensor_id;
> bool little_endian;
> + struct qoriq_sensor *sensor[SITES_MAX];
> };
>
> static void tmu_write(struct qoriq_tmu_data *p, u32 val, void __iomem *addr)
> @@ -97,48 +104,83 @@ static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem *addr)
>
> static int tmu_get_temp(void *p, int *temp)
> {
> + struct qoriq_sensor *qsensor = p;
> + struct qoriq_tmu_data *qdata = qsensor->qdata;
> u32 val;
> - struct qoriq_tmu_data *data = p;
>
> - val = tmu_read(data, &data->regs->site[data->sensor_id].tritsr);
> + val = tmu_read(qdata, &qdata->regs->site[qsensor->id].tritsr);
> *temp = (val & 0xff) * 1000;
>
> return 0;
> }
>
> -static int qoriq_tmu_get_sensor_id(void)
> +static const struct thermal_zone_of_device_ops tmu_tz_ops = {
> + .get_temp = tmu_get_temp,
> +};
> +
> +static int qoriq_tmu_register_tmu_zone(struct platform_device *pdev)
> {
> - int ret, id;
> + struct qoriq_tmu_data *qdata = platform_get_drvdata(pdev);
> struct of_phandle_args sensor_specs;
> struct device_node *np, *sensor_np;
> + int ret, id, sites = 0;
>
> np = of_find_node_by_name(NULL, "thermal-zones");
> if (!np)
> return -ENODEV;
>
> - sensor_np = of_get_next_child(np, NULL);
> - ret = of_parse_phandle_with_args(sensor_np, "thermal-sensors",
> - "#thermal-sensor-cells",
> - 0, &sensor_specs);
> - if (ret) {
> + for_each_available_child_of_node(np, sensor_np) {
> + ret = of_parse_phandle_with_args(sensor_np, "thermal-sensors",
> + "#thermal-sensor-cells",
> + 0, &sensor_specs);
> + if (ret) {
> + of_node_put(np);
> + of_node_put(sensor_np);
> + return ret;
> + }
> +
> + if (sensor_specs.args_count >= 1) {
> + id = sensor_specs.args[0];
> + WARN(sensor_specs.args_count > 1,
> + "%s: too many cells in sensor specifier %d\n",
> + sensor_specs.np->name,
> + sensor_specs.args_count);
> + } else {
> + id = 0;
> + }
> +
> of_node_put(np);
> of_node_put(sensor_np);
> - return ret;
> - }
>
> - if (sensor_specs.args_count >= 1) {
> - id = sensor_specs.args[0];
> - WARN(sensor_specs.args_count > 1,
> - "%s: too many cells in sensor specifier %d\n",
> - sensor_specs.np->name, sensor_specs.args_count);
> - } else {
> - id = 0;
> + if (id > SITES_MAX)
> + return -EINVAL;
> +
> + qdata->sensor[id] = devm_kzalloc(&pdev->dev,
> + sizeof(struct qoriq_sensor), GFP_KERNEL);
> + if (!qdata->sensor[id])
> + return -ENOMEM;
> +
> + qdata->sensor[id]->id = id;
> + qdata->sensor[id]->qdata = qdata;
> +
> + qdata->sensor[id]->tzd = devm_thermal_zone_of_sensor_register(
> + &pdev->dev, id, qdata->sensor[id], &tmu_tz_ops);
> +
> + if (IS_ERR(qdata->sensor[id]->tzd)) {
> + ret = PTR_ERR(qdata->sensor[id]->tzd);
> + dev_err(&pdev->dev,
> + "Failed to register thermal zone device.\n");
> + return -ENODEV;
> + }
> +
> + sites |= 0x1 << (15 - id);

The current code is reading the DT in order to get the sensor id and
initialize it. IOW, the DT gives the sensors to use.

IMO, it would be more self contained if the driver initializes all the
sensors without taking care of the DT and let the of- code to do the
binding when the thermal zone, no ?

> }
>
> - of_node_put(np);
> - of_node_put(sensor_np);
> + /* Enable monitoring */
> + if (sites != 0)
> + tmu_write(qdata, sites | TMR_ME | TMR_ALPF, &qdata->regs->tmr);
>
> - return id;
> + return 0;
> }
>
> static int qoriq_tmu_calibration(struct platform_device *pdev)
> @@ -188,16 +230,11 @@ static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
> tmu_write(data, TMR_DISABLE, &data->regs->tmr);
> }
>
> -static const struct thermal_zone_of_device_ops tmu_tz_ops = {
> - .get_temp = tmu_get_temp,
> -};
> -
> static int qoriq_tmu_probe(struct platform_device *pdev)
> {
> int ret;
> struct qoriq_tmu_data *data;
> struct device_node *np = pdev->dev.of_node;
> - u32 site = 0;
>
> if (!np) {
> dev_err(&pdev->dev, "Device OF-Node is NULL");
> @@ -213,13 +250,6 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
>
> data->little_endian = of_property_read_bool(np, "little-endian");
>
> - data->sensor_id = qoriq_tmu_get_sensor_id();
> - if (data->sensor_id < 0) {
> - dev_err(&pdev->dev, "Failed to get sensor id\n");
> - ret = -ENODEV;
> - goto err_iomap;
> - }
> -
> data->regs = of_iomap(np, 0);
> if (!data->regs) {
> dev_err(&pdev->dev, "Failed to get memory region\n");
> @@ -233,18 +263,13 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
> if (ret < 0)
> goto err_tmu;
>
> - data->tz = thermal_zone_of_sensor_register(&pdev->dev, data->sensor_id,
> - data, &tmu_tz_ops);
> - if (IS_ERR(data->tz)) {
> - ret = PTR_ERR(data->tz);
> - dev_err(&pdev->dev,
> - "Failed to register thermal zone device %d\n", ret);
> - goto err_tmu;
> + ret = qoriq_tmu_register_tmu_zone(pdev);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "Failed to register sensors\n");
> + ret = -ENODEV;
> + goto err_iomap;
> }
>
> - /* Enable monitoring */
> - site |= 0x1 << (15 - data->sensor_id);
> - tmu_write(data, site | TMR_ME | TMR_ALPF, &data->regs->tmr);
>
> return 0;
>
> @@ -261,8 +286,6 @@ static int qoriq_tmu_remove(struct platform_device *pdev)
> {
> struct qoriq_tmu_data *data = platform_get_drvdata(pdev);
>
> - thermal_zone_of_sensor_unregister(&pdev->dev, data->tz);
> -
> /* Disable monitoring */
> tmu_write(data, TMR_DISABLE, &data->regs->tmr);
>
>


--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

\
 
 \ /
  Last update: 2018-10-13 22:43    [W:0.127 / U:6.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site