lkml.org 
[lkml]   [2018]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] Documentation: dt: Add binding for /secure-chosen/stdout-path
On Mon, Oct 08, 2018 at 06:16:42PM +0800, Jerome Forissier wrote:
> Some platforms may use a single device tree to describe two address
> spaces, as described in d9f43babb998 ("Documentation: dt: Add bindings
> for Secure-only devices"). For these platforms it makes sense to define
> a secure counterpart of /chosen, namely: /secure-chosen. This new node
> is meant to be used by the secure firmware to pass data to the secure
> OS. Only the stdout-path property is supported for now.
>
> Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
> ---
>
> Notes:
> Sending this again, slightly modified. Previous submission was in March
> 2017 [1]. Since then, OP-TEE has implemented this binding for platforms
> that use DT [2] (fallback to /chosen/stdout-path to be implemented in
> [3]). A patch for QEMU has been proposed [4], to which the maintainer
> responded "Are the DT bindings upstream yet?" ;-)
>
> [1] https://patchwork.kernel.org/patch/9602401/
> [2] https://github.com/OP-TEE/optee_os/commit/4dc31c52544a
> [3] https://github.com/OP-TEE/optee_os/pull/2569
> [4] https://patchwork.ozlabs.org/patch/979345/
>
> Changes since v1:
> - Use "should" instead of "may" ("...the Secure OS should use the value
> of /chosen/stdout-path...").
>
> Documentation/devicetree/bindings/arm/secure.txt | 19 ++++++++++++++++++-
> 1 file changed, 18 insertions(+), 1 deletion(-)

Applied.

Rob

\
 
 \ /
  Last update: 2018-10-12 22:46    [W:0.060 / U:7.580 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site