lkml.org 
[lkml]   [2018]   [Oct]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] mtd: rawnand: Provide helper for polling GPIO R/B pin
Date
Each controller driver with access to NAND R/B pin over GPIO would have 
to reimplement the polling loop otherwise.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
---
Changelog:
v2:
New patch - v1 consisted of only one patch (the followning one)


drivers/mtd/nand/raw/nand_base.c | 38 ++++++++++++++++++++++++++++++++++++++
include/linux/mtd/rawnand.h | 10 ++++++++++
2 files changed, 48 insertions(+)

diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 05bd0779fe9b..ff1ac4a3c647 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -45,6 +45,9 @@
#include <linux/io.h>
#include <linux/mtd/partitions.h>
#include <linux/of.h>
+#ifdef CONFIG_GPIOLIB
+#include <linux/gpio/consumer.h>
+#endif

#include "internals.h"

@@ -531,6 +534,41 @@ int nand_soft_waitrdy(struct nand_chip *chip, unsigned long timeout_ms)
};
EXPORT_SYMBOL_GPL(nand_soft_waitrdy);

+#ifdef CONFIG_GPIOLIB
+/**
+ * nand_gpio_waitrdy - Poll R/B GPIO pin until ready
+ * @chip: NAND chip structure
+ * @gpiod: GPIO descriptor of R/B pin
+ * @timeout_ms: Timeout in ms
+ *
+ * Poll the R/B GPIO pin until it becomes ready. If that does not happen
+ * whitin the specified timeout, -ETIMEDOUT is returned.
+ *
+ * This helper is intended to be used when the controller has access to the
+ * NAND R/B pin over GPIO.
+ *
+ * Be aware that calling this helper from an ->exec_op() implementation means
+ * ->exec_op() must be re-entrant.
+ *
+ * Return 0 if the R/B pin indicates chip is ready, a negative error otherwise.
+ */
+int nand_gpio_waitrdy(struct nand_chip *chip, struct gpio_desc *gpiod,
+ unsigned long timeout_ms)
+{
+ /* Wait until command is processed or timeout occurs */
+ timeout_ms = jiffies + msecs_to_jiffies(timeout_ms);
+ do {
+ if (gpiod_get_value_cansleep(gpiod))
+ return 0;
+
+ cond_resched();
+ } while (time_before(jiffies, timeout_ms));
+
+ return gpiod_get_value_cansleep(gpiod) ? 0 : -ETIMEDOUT;
+};
+EXPORT_SYMBOL_GPL(nand_gpio_waitrdy);
+#endif
+
/**
* panic_nand_get_device - [GENERIC] Get chip for selected access
* @chip: the nand chip descriptor
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index e10b126e148f..09f0ed1345b1 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -1346,4 +1346,14 @@ void nand_release(struct nand_chip *chip);
*/
int nand_soft_waitrdy(struct nand_chip *chip, unsigned long timeout_ms);

+#ifdef CONFIG_GPIOLIB
+struct gpio_desc;
+/*
+ * External helper for controller drivers that have to implement the WAITRDY
+ * instruction and do have GPIO pin to check it.
+ */
+int nand_gpio_waitrdy(struct nand_chip *chip, struct gpio_desc *gpiod,
+ unsigned long timeout_ms);
+#endif
+
#endif /* __LINUX_MTD_RAWNAND_H */
--
2.16.4
\
 
 \ /
  Last update: 2018-10-12 22:40    [W:0.239 / U:0.936 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site