atm = 760 torr = 760 mm Hg = kpa = psi. = atm. = atm. = 107 kpa 760 torr 1 atm 760 mm Hg = 790.


 Sabrina Chapman
 6 years ago
 Views:
Transcription
1 CHATER 3. The atmosphere is a homogeneous mixture (a solution) of gases.. Solids and liquids have essentially fixed volumes and are not able to be compressed easily. have volumes that depend on their conditions, and can be compressed or expanded by changes in those conditions. Although the particles of matter in solids are essentially fixed in position (the solid is rigid), the particles in liquids and gases are free to move. 3. A small amount of water is added to a metal can and then the can is heated so as to boil the water and fill the can with steam (gaseous water). The heat is then removed and the can is sealed off. As the steam in the can cools, it condenses back to a liquid. Since the gas in the can has condensed, the pressure of the atmosphere is much larger than the pressure of gas in the can, and the atmospheric pressure causes the can to collapse. 4. Figure 3. in the text shows a simple mercury barometer: a tube filled with mercury is inverted over a reservoir (containing mercury) that is open to the atmosphere. When the tube is inverted, the mercury falls to a level at which the pressure of the atmosphere is sufficient to support the column of mercury. One standard atmosphere of pressure is taken to be the pressure capable of supporting a column of mercury to a height of mm above the reservoir level. 5. mix 6. ressure units include mm Hg, torr, pascals, and psi. The unit mm Hg is derived from the barometer, since in a traditional mercury barometer, we measure the height of the mercury column (in millimeters) above the reservoir of mercury atm = 760 torr = 760 mm Hg = 0.35 ka = 4.70 psi a. 45. ka b. 755 mm Hg c. 80 torr d..04 atm atm 0.35 ka atm 760 mm Hg = atm = atm atm 0.35 ka = 07 ka 760 torr atm 760 mm Hg atm = 790. mm Hg atm = 760 torr = 760 mm Hg = 0.35 ka = 4.70 psi atm a. 4.9 psi =.0 atm 4.70 psi 67
2 b. 795 torr c. 743 mm Hg atm 760 torr =.05 atm 0.35 ka 760 mm Hg = 99. ka d. 99,436 a ka 000 a = ka atm = 760 torr = 760 mm Hg = 0.35 ka = 4.70 psi atm a. 699 mm Hg = 0.90 atm 760 mm Hg b. 8. psi 760 mm Hg 4.70 psi = 94 mm Hg c. 86 mm Hg = 86 torr d psi 795 mm Hg = 5.4 psi 760 mm Hg atm = 760 torr = 760 mm Hg = 0.35 ka = 4.70 psi 0.35 ka a. 7.3 psi = 9 ka 4.70 psi b..5 atm c. 4.5 atm d. 4 psi 4.70 psi atm 760 mm Hg atm atm 4.70 psi = 6.9 psi = mm Hg = 5. atm..00 atm = 760 torr = 760 mm Hg = 0.35 ka = 4.70 psi a atm a =.5 atm 0,35 a b.. atm c. 97,35 a 0,35 a atm 760 mm Hg 0,35 a = a = mm Hg d..3 ka 000 a ka = a 68
3 ..00 atm = 760 torr = 760 mm Hg = 0.35 ka = 4.70 psi 0.35 ka a. 6.4 atm = 65 ka atm b. 4. atm c. 794 mm Hg d. 7. psi atm 4.70 psi 760 torr atm = torr atm 760 mm Hg =.85 atm =.04 atm 3. The volume of a sample of an ideal gas at constant temperature will decrease if the pressure on the gas is increased. 4. Additional mercury increases the pressure on the gas sample, causing the volume of the gas upon which the pressure is exerted to decrease (Boyle s Law) 5. pressure 6. = k; = 7. a. = 755 mm Hg = 780 mm Hg = 5 ml =? (755 mm Hg)(5 ml) = = = ml (780 mm Hg) b. =.08 atm = 0.95 atm = 3 ml =? (.08 atm)(3 ml) = = = 53 ml (0.95 atm) c. = 03 ka = ka = 3.0 L =? (03 ka)(3.0 L) = = =.57 L ( ka) 8. a. =.5 atm = 775 mm Hg =.00 atm = 375 ml =? (.5 atm)(375 ml) = = = 43 ml (.00 atm) b. =.08 atm = 35 ka =.33 atm = 95 ml =? 69
4 (.08 atm)(95 ml) = = = 58 ml (.33 atm) c. = 3 ka = 98.6 mm Hg = 765 mm Hg = 6.75 L =? (98.6 mm Hg)(6.75 L) = = = 8.67 L (765 mm Hg) 9. a. = 0. ka =? ka = 9.3 L = 0.0 L (0. ka)(9.3 L) = = = 97 ka (0.0 L) b. = 755 torr = 755 mm Hg = 76 mm Hg = 5.7 ml =? ml (755 mm Hg)(5.7 ml) = = = 5.5 ml (76 mm Hg) c. =.05 atm =. ka =.07 atm = 5. L =? (.05 atm)(5. L) = = (.07 atm) = 48.6 L 0. a. = 755 mm Hg =? = 5 ml = 37 ml (755 mm Hg)(5 ml) = = = 689 mm Hg (37 ml) b. =.08 atm =? = 33 ml = 99 ml (.08 atm)(33 ml) = = =.0 atm (99 ml) c. = 789 mm Hg = 35 ka = 03 mm Hg = 3.0 L =? (789 mm Hg)(3.0 L) = = (03 mm Hg) =.35 L. =.0 atm =.99 atm = 5 ml =? 70
5 = (.0 atm)(5 ml) = = 76.8 ml (.99 atm). = = =.04 L =? L = ( )(.04 L) = =.04 L = 0.50 L ( ) 3. = 785 mm Hg =? = 9. ml = 5. ml (785 mm Hg)(9. ml) = = (5. ml) =.5 03 mm Hg 4. = (.00 atm)(7. ml) = = 7. atm (.00 ml) 5. Absolute zero is the lowest temperature that can exist. Absolute zero is the temperature at which the volume of an ideal gas sample would be predicted to become zero. Absolute zero is the zeropoint on the Kelvin temperature scale (and corresponds to 73 C). 6. Charles s Law indicates that an ideal gas decreases by /73 of its volume for every degree Celsius its temperature is lowered. This means an ideal gas would approach a volume of zero at 73 C. 7. directly 8. = kt; /T = /T 9. =.5 L =? ml T = 5. C = 98. K T = 78.5 C = 94.5 K T (.5 L)(94.5 K) = T = (98. K) = L 30. = 375 ml =? ml T = 78 C = 35 K T = C = 95 K T = T (375 ml)(95 K) = = 35 ml (35 K) 3. a. =.03 L = 3.0 L T = 4 C = 97 K T =? 7
6 T (3.0 L)(97 K) T = = = 440 K = 67 C (.03 L) b. = 7 ml =? T = 73 K T = 373 K T = T (7 ml)(373 K) = = 74 ml (73 K) c. = 49.7 ml =? T = 34 C= 307 K T = 350 K T = T (49.7 ml)(350 K) = = 56.7 ml (307 K) 3. a. = 73.5 ml =? L T = 0 C = 73 K T = 5 C = 98 K T = T (73.5 ml)(98 K) = = 80. ml (73 K) b. = 5. L = 0.0 L T = 5 C = 98 K T =? C T (0.0 L)(98 K) T = = = 96 K = 77 C (5. L) c. =.75 ml =? ml T =.3 K T = 0 C = 73 K T (.75 ml)(73 K) = T = (.3 K) = 08 ml (. 0 ml) 33. a. = 9.4 L =? T = 4 C = 97 K T = 48 C = 3 K T (9.4 L)(3 K) = T = (97 K) = 9.88 L b. = 4.9 ml = 49.9 ml T = C = 6 K T =? T (49.9 ml)(6 K) T = = = 53 K = 50. C (4.9 ml) c. = 95 ml =? T = 5 K T = 73 K 7
7 T (95 ml)(73 K) = T = (5 K) =.0 04 ml 34. a. =.0 0 L = 5.00 L T = 50 C = 43 K T =? C T (5.00 L)(43 K) T = = = 35.4 K = 38 C (0 L) b. = 44. ml =? ml T = 98 K T = 0 T = T (44. ml)(0 K) = = 0 ml (0 K is absolute zero) (98 K) c. = 44. ml =? ml T = 98 K T = 0 C = 73 K T = T (44. ml)(73 K) = = 40.5 ml (98 K) 35. =.5L =? ml T = 9 K T = 78 K T = T (.5 L)(78 K) = = L = 0.34 L (9 K) T 36. = T (5 ml)(50 K) = = 69.4 ml = 69 ml to two significant figures (450 K) C + 73 = 97 K 7 C + 73 = 345 K T = T (375 ml)(345 K) = = 436 ml (97 K) T 38. = T Temp, C olume, ml directly 40. = an; /n = /n 73
8 4. /n = /n = 4 ml n = mol 4 ml = 89 ml =? L n = mol 4. = an; /n = /n Since.08 g of chlorine contains twice the number of moles of gas contained in the.04 g sample, the volume of the.08 g sample will be twice as large = 744 ( ) ml 43. = 00. L =? L n = 3.5 mol n = 4.5 mol 4.5 mol 00. L 3.5 mol = 435 L 44. molar mass of Ar = g.7 g Ar = mol Ar g 4. L.9 mol mol = 80. L 45. Although the definition may seem a little strange, an ideal gas is one which obeys the ideal gas law, =, exactly. That is, if knowledge of three of the properties of a gas (pressure, volume, temperature, and amount) leads to the correct value for the fourth property when using this equation, then the gas under study is an ideal gas. 46. Real gases most closely approach ideal gas behavior under conditions of relatively high temperatures (0 C or higher) and relatively low pressures ( atm or lower). 47. For an ideal gas, = is true under any conditions. Consider a particular sample of gas (so that n remains constant) at a particular fixed temperature (so that T remains constant also). Suppose that at pressure the volume of the gas sample is. Then for this set of conditions, the ideal gas equation would be given by =. If we then change the pressure of the gas sample to a new pressure, the volume of the gas sample changes to a new volume. For this new set of conditions, the ideal gas equation would be given by =. As the righthand sides of these equations are equal to the same quantity (because we defined n and T to be constant), then the lefthand sides of the equations must also be equal, and we obtain the usual form of Boyle s law. = 74
9 48. For an ideal gas, = is true under any conditions. Consider a particular sample of gas (so that n remains constant) at a particular fixed pressure (so that remains constant also). Suppose that at temperature T the volume of the gas sample is. Then for this set of conditions, the ideal gas equation would be given by =. If we then change the temperature of the gas sample to a new temperature T, the volume of the gas sample changes to a new volume. For this new set of conditions, the ideal gas equation would be given by =. If we make a ratio of these two expressions for the ideal gas equation for this gas sample, and cancel out terms that are constant for this situation (, n, and R) we get = T = T This can be rearranged to the familiar form of Charles s law = T T 49. a. = 78.4 mm Hg =.09 atm; T = 6. C = 99 K = (0.0)( L atm mol K )(99 K) = =.44 L (.09 atm) b. = 7.5 ml = L; T = 6.6 C = 90 K = (0.0078)( L atm mol K )(90 K) = = 6.76 atm (0.075 L) c. = 45. ml = L (.045 atm)(0.045 L) T = = = 57 K nr (0.004)( L atm mol K ) 50. a. = 78 mm Hg =.03 atm; T = 7 C = 300 K = (0.0 mol)( L atm mol K )(300 K) = = 5.0 L (.03 atm) b. = 644 ml = L = (0.09)( L atm mol K )(303 K) = = 3.56 atm (0.644 L) = mm Hg 75
10 c. = 745 mm = atm (0.980 atm)(. L) T = = = 334 K nr (0.40)( L atm mol K ) 5. molar mass Ne = 0.8 g; 5 C = 98 K (.0 atm)(5.00 L) n= = = mol Ne RT ( L atm mol K )(98 K) mol Ne 0.8 g Ne Ne = 4. g Ne 5. molar mass Ar = g; 5 C = 98 K Ar. g Ar = mol Ar g Ar = ( mol)( L atm mol K )(98 K) = = atm (0.0 L) 53. molar mass of He = g; 00 C = 373 K; 785 mm Hg =.033 atm He.04 g He = mol He g He = ( mol)( L atm mol K )(373 K) = = 5. L (.033 atm) 54. molar mass Ar = g; 40.0 g =.00 (.00 atm)(5.00 L) T = = = 304 K = 3 C nr (.00)( L atm mol K ) 55. T = 5 C + 73 = 98 K; molar masses: He, g; O, 3.00 g (55 atm)(00.0 L) n= = = 043 mol = mol RT ( L atm mol K )(98 K) mol of either He or O would be needed g He mol He He = g He g O mol O O = g O 56. molar mass Ne = 0.8 g; 5 C = 98 K; 50 C = 33 K.5 g Ne = mol 0.8 g 76
11 = = ( mol)( L atm mol K )(98 K) = = 0.50 atm (0. L) ( mol)( L atm mol K )(33 K) = = 0.63 atm (0. L) 57. molar mass Ne = 0.8 g; = 500 torr = atm.0 g Ne 0.8 g = mol Ne ( atm)(5.00 L) T = = = K = 8.0 K nr ( mol)( L atm mol K ) 58. molar mass O = 3.00 g; 784 mm Hg =.03 atm O 4.5 g O = 0.38 mol 3.00 g O (.03 atm)(.5 L) T = nr = (0.38 mol)( L atm mol K ) = 38 K = 35 C kg = g; molar mass Ne = 0.8 g Ne g Ne = 47.8 mol Ne 0.8 g Ne = (47.8 mol)( L atm mol K )(300. K) = = 30.5 atm = 3 atm (00. L) 60. Molar masses: He, g; Ar, g He 4.5 g He =.037 mol He g He 56. g Ar Ar g Ar =.407 mol Ar For He, = For Ar, = (.037 mol)( L atm mol K )(98 K) = = 5.07 atm (5.00 L) (.407 mol)( L atm mol K )(303 K) = = 3.50 atm (0.00 L) The helium is at a higher pressure than the argon. 6. =.0 atm =? atm = 4.3 ml = 5. ml T = 5 C = 98 K T = 50 C = 33 K 77
12 T = T (33 K)(.0 atm)(4.3 ml) = (98 K)(5. ml) =.75 atm 6. molar mass Ar = g; 9 C = 30 K; 4 C = 35 K Ar.9 g Ar = mol Ar g Ar = = ( mol)( L atm mol K )(30 K) = = 0.33 atm (.4 L) ( mol)( L atm mol K )(35 K) = = atm (.4 L) 63. =.05 atm = atm = 459 ml =? ml T = 7 C = 300. K T = 5 C = 88 K T = T (88 K)(.05 atm)(459 ml) = = 464 ml (300 K)(0.997 atm) 64. Molar mass of H O = 8.0 g;.0 ml = L; 5 C = 498 K H O 0.50 g H O 8.0 g H O = mol H O = ( mol)( L atm mol K )(498 K) = = 83 atm =.8 0 atm (0.000 L) 65. In deriving the ideal gas law, we assume that the molecules of gas occupy no volume, and that the molecules do not interact with each other. Under these conditions, there is no difference between gas molecules of different substances (other than their masses) as far as the bulk behavior of the gas is concerned. Each gas behaves independently of other gases present, and the overall properties of the sample are determined by the overall quantity of gas present. total = n where n is the number of individual gases present in the mixture. 66. As a gas is bubbled through water, the bubbles of gas become saturated with water vapor, thus forming a gaseous mixture. The total pressure in a sample of gas that has been collected by bubbling through water is made up of two components: the pressure of the gas of interest and the pressure of water vapor. The partial pressure of the gas of interest is then the total pressure of the sample minus the vapor pressure of water. 67. molar masses: He, g; Ne, 0.8 g; 5 C = 98 K.4 g He.79 g Ne He g He Ne 0.8 g Ne = 0.60 mol He = 0.38 mol Ne 78
13 helium = neon = nheliumrt nneo (0.60 mol)( L atm mol K )(98 K) = = 4. atm (.04 L) (0.38 mol)( L atm mol K )(98 K) = = 3.5 atm (.04 L) total = 4. atm atm = 7.5 atm 68. molar masses: Ne, 0.8 g; Ar, g; 7 C = 300 K Ne.8 g Ne = mol Ne 0.8 g Ne.49 g Ar Ar g Ar = mol Ar neon = nneo ( mol)( L atm mol K )(300 K) = = 0.58 atm (9.87 L) argon = n RT = = atm (9.87 L) argon ( mol)( L atm mol K )(300 K) total = 0.58 atm atm = 0.34 atm g O =.64 O ; 65. g CO =.479 mol CO ; total moles = 3.0 mol.64 O oxygen = 9. atm 3.0 mol total = 4.84 atm O.479 mol CO carbon dioxide = 9. atm 3.0 mol total = 4.37 atm CO Once the partial pressure of O had been calculated, we also could have calculated the partial pressure of CO as the difference between the total pressure (9. atm) and the partial pressure of O (4.84 atm) mm Hg =.7 atm; 6 C = 99 K; molar masses: Ne, 0.8 g; Ar, g (.7 atm)(3.00 L) n= = = mol RT ( L atm mol K )(99 K) The number of moles of an ideal gas required to fill a givensized container to a particular pressure at a particular temperature does not depend on the specific identity of the gas. So mol of Ne gas or mol of Ar gas would give the same pressure in the same flask at the same temperature. 0.8 g Ne mass Ne = mol Ne = 3.00 g Ne Ne mass Ar = mol Ar g Ar Ar = 5.94 g Ar 7. oxygen = total water vapor = = 745 torr 79
14 7. molar masses: He, g; Ar, g; 73 C = 546 K He.5 g He = mol He g Ne.9 g Ar Ar g Ar = mol Ar helium = nheliumrt (0.873 mol)( L atm mol K )(546 K) = =.45 atm (5.5 L) argon = n RT = = 0.66 atm (5.5 L) argon ( mol)( L atm mol K )(546 K) total = 0.58 atm atm = 3.07 atm 73. oxygen = total water vapor = (755 3) mm Hg = 73 mm Hg = atm T = 4 C + 73 = 97 K; = 500. ml = L (0.963 atm)(0.500 L) n= = = =.98 0 mol O RT ( L atm mol K )(97 K) atm = mm Hg; molar mass of Zn = g hydrogen = mm Hg 3 mm Hg = 75.3 mm Hg = atm = 40 ml = 0.40 L; T = 30 C + 73 = 303 K n hydrogen (0.990 atm)(0.40 L) = = = mol hydrogen RT ( L atm mol K )(303 K) mol H Zn H = mol of Zn must have reacted mol Zn g Zn Zn = 0.65 g Zn must have reacted 75. A law is a statement that precisely expresses generally observed behavior. A theory consists of a set of assumptions/hypotheses that is put forth to explain the observed behavior of matter. Theories attempt to explain natural laws. 76. A theory is successful if it explains known experimental observations. Theories that have been successful in the past may not be successful in the future (for example, as technology evolves, more sophisticated experiments may be possible in the future). 77. assume that the volume of the molecules themselves in a gas sample is negligible compared to the bulk volume of the gas sample: this helps us to explain why gases are so compressible. 78. pressure 79. kinetic energy 80
15 80. no 8. The temperature of a gas reflects, on average, how rapidly the molecules in the gas are moving. At high temperatures, the particles are moving very fast and collide with the walls of the container frequently, whereas at low temperatures, the molecules are moving more slowly and collide with the walls of the container infrequently. The Kelvin temperature is directly proportional to the average kinetic energy of the particles in a gas. 8. If the temperature of a sample of gas is increased, the average kinetic energy of the particles of gas increases. This means that the speeds of the particles increase. If the particles have a higher speed, they will hit the walls of the container more frequently and with greater force, thereby increasing the pressure. 83. The molar volume of a gas is the volume occupied by one mole of the gas under a particular set of temperature and pressure conditions (usually ST: 0 C, atm). When measured under the same conditions, all ideal gases have the same molar volume (.4 L at ST). 84. Standard Temperature and ressure, ST = 0 C, atm pressure. These conditions were chosen because they are easy to attain and reproduce experimentally. The barometric pressure within a laboratory is likely to be near atm most days, and 0 C can be attained with a simple ice bath. 85. molar masses: CaO, g; CO ; 44.0 g CaO.5 g CaO = 0.09 mol CaO g CaO From the balanced chemical equation, 0.09 mol CaO would absorb 0.09 mol CO 44.0 g CO 0.09 mol CO CO = 0.98 g CO Since one mole of an idea gas occupies.4 L at ST, 0.09 mol of CO would occupy 0.09 mol CO.4 L = L at ST 86. Molar mass of C =.0 g; 5 C = 98 K.5 g C = 0.04 C.0 g Since the balanced chemical equation shows a : stoichiometric relationship between C and O, then 0.04 of O will be needed = (0.04)( L atm mol K )(98 K) = =.50 L O (.0 atm) 87. C 8 H 8 (l) + 5O (g) 6CO (g) + 8H 0(l) molar mass C 8 H 8 = 4. g C8H8 0.0 g C 8 H 8 4. g C H = mol C 8H
16 5 mol O mol C 8 H 8 mol C H =.095 mol O 8 8 At ST, one mole of an ideal gas occupies.4 L of volume..095 mol O.4 L = 4.5 L O at ST mol 88. Molar mass of Mg = 4.3 g; ST:.00 atm, 73 K.0 g Mg = mol Mg 4.3 g As the coefficients for Mg and Cl in the balanced equation are the same, for mol of Mg reacting we will need mol of Cl. = mol Cl.4 L = 0.94 L Cl at ST C = 300 K; 6 C = 99 K; molar mass NH 4 Cl = g (.0 atm)(4. L) mol NH 3 present = n= = = = 0.74 mol NH RT 3 ( L atm mol K )(300 K) mol HCl present = (0.998 atm)(5.35 L) n= = = = 0.8 mol HCl RT ( L atm mol K )(99 K) NH 3 and HCl react on a : basis: NH 3 is the limiting reactant. NH4Cl g NH4Cl 0.74 mol NH 3 = 9.3 g NH 4 Cl produced NH NH Cl molar mass CaC = 64.0 g; 5 C = 98 K.49 g CaC 64.0 g = mol CaC From the balanced chemical equation for the reaction, mol of CaC reacting completely would generate mol of acetylene, C H = = ( mol)( L atm mol K )(98 K) = = 0.94 L (.0 atm) ( mol)( L atm mol K )(73 K) = = L at ST (.00 atm) 9. CuSO 4 5H O(s) CuSO 4 (s) + 5H O(g) 350 C = 63 K; molar mass CuSO 4 5H O = 49.7 g. CuSO45HO 5.00 g CuSO 4 =5H O g CuSO 5H O = mol CuSO 4 5H O 4 8
17 5 mol HO mol CuSO 4 5H O. CuSO 5H O = 0.00 H O 4 = (0.00)( L atm mol K )(63 K) = = 4.9 L H O (.04 atm) 9. Molar mass of Mg 3 N = g; T = 4 C = 97 K; = 75 mm Hg = atm 0.3 g Mg 3 N g = 0.0 mol Mg 3N From the balanced chemical equation, the amount of NH 3 produced will be mol NH3 0.0 mol Mg 3 N Mg N = 0.04 mol NH 3 3 = (0.04 mol)( L atm mol K )(97 K) = = 5.03 L (0.989 atm) This assumes that the ammonia was collected dry. 93. Molar masses: He, g; H,.06 g; 8 C = 30 K He 4. g He = 3.55 mol He g He H.6 g H.06 g H = 0.7 mol H total moles = 3.55 mol mol = 4.5 mol (4.5 mol)( L atm mol K )(30 K) = = = 357 L (0.985 atm) 94. Molar masses: O, 3.00 g; N, 8.0 g; T = 35 C = 308 K; = 755 mm Hg = atm O 6. g O 3.00 g O = 0.89 mol O N 35. g N 8.0 g N =.5 mol N total moles = 0.89 mol +.5 mol =.07 mol (.07 mol)( L atm mol K )(308 K) = = = 5.7 L (0.993 atm) 95. = 89 mm Hg =.00 atm = 760 mm Hg = 5. ml =? T = 95 C + 73 = 368 K T = 73 K 83
18 T = T (73 K)(89 mm Hg)(5. ml) = =.9 ml (368 K)(760 mm Hg) 96. molar masses: He, g; Ar, g He 5.0 g He =.54 mol He g He.54 mol He.4 L 4. g Ar Ar g Ar.054 mol Ar.4 L = 8. L =.054 mol Ar = 3.6 L 97. molar masses: O, 3.00 g; N, 8.0 g; CO, 44.0 g; Ne, 0.8 g O 5.00 g O 3.00 g O = mol O N 5.00 g N 8.0 g N = mol N CO 5.00 g CO 44.0 g CO = 0.36 mol CO 5.00 g Ne Ne 0.8 g Ne = mol Ne Total moles of gas = = L is the volume occupied by one mole of any ideal gas at ST. This would apply even if the gas sample is a mixture of individual gases L = 5.59 L = 5.6 L The partial pressure of each individual gas in the mixture will be related to what fraction on a mole basis each gas represents in the mixture mol O oxygen =.00 atm total = 0.5 atm O mol N nitrogen =.00 atm total = 0.56 atm N 0.36 mol CO carbon dioxide =.00 atm total = 0.63 atm CO neon =.00 atm mol Ne total = atm Ne 84
19 98. Molar masses: He, g; Ne, 0.8 g He 6.5 g He =.56 He g He 4.97 g Ne Ne 0.8 g Ne = mol Ne n total = mol =.807 mol As of an ideal gas occupies.4 L at ST, the volume is given by.807 mol.4 L = L = 40.5 L. The partial pressure of a given gas in a mixture will be proportional to what fraction of the total number of moles of gas the given gas represents He = Ne =.56 He.807 mol total mol Ne.807 mol total 99. Na(s) + Cl (g) NaCl(s) molar mass Na =.99 g Na 4.8 = 0.09 mol Na.99 g Na.00 atm = atm = atm.00 atm = atm = 0.36 atm Cl 0.09 mol Na mol Na = mol Cl mol Cl.4 L =.34 L Cl at ST 00. C H (g) + 5O (g) H O(g) + 4CO (g) molar mass C H = 6.04 g.00 g C H 6.04 g = mol C H From the balanced chemical equation, = mol of CO will be produced mol CO.4 L =.7 L at ST 0. FeO(s) + CO(g) Fe(s) + CO (g) molar mass FeO = 7.85 g;.45 kg = g FeO g FeO = 0.8 mol FeO 7.85 g FeO 85
20 Since the coefficients of the balanced equation are all one, if 0.8 mol FeO reacts, then 0.8 mol CO(g) is required and 0.8 mol of CO (g) is produced. 0.8 mol.4 L = 45 L L CO(g) is required for reaction and L CO (g) are produced by the reaction ml = 0.5 L 0.5 L.4 L = mol H From the balanced chemical equation, one mole of zinc is required for each mole of hydrogen produced. Therefore, mol of Zn will be required g Zn mol Zn = g Zn 03. kelvin (absolute) 04. twice 05. consist of tiny particles, which are so small that the fraction of the bulk volume of the gas occupied by the particles is negligible. The particles of a gas are in constant random motion and collide with the walls of the container (giving rise to the pressure of the gas). The particles of a gas do not attract or repel each other. The average kinetic energy of the particles of a gas is reflected in the temperature of the gas sample. 06. a. = k; = b. = kt; /T = /T c. = an; /n = /n d. = e. /T = /T 07. sum 08. First determine what volume the helium in the tank would have if it were at a pressure of 755 mm Hg (corresponding to the pressure the gas will have in the balloons) atm = 6384 mm Hg = (5. L) 6384 mm Hg 755 mm Hg = 3 L Allowing for the fact that 5. L of He will have to remain in the tank, this leaves 3 5. = 87.8 L of He for filling the balloons L He balloon = 5 balloons.50 L He 86
21 09. A decrease in temperature would tend to make the volume of the weather balloon decrease. As the overall volume of a weather balloon increases when it rises to higher altitudes, the contribution to the new volume of the gas from the decrease in pressure must be more important than the decrease in temperature (the temperature change in kelvins is not as dramatic as it seems in degrees Celsius). 0. According to the balanced chemical equation, when of (NH 4 ) CO 3 reacts, a total of 4 moles of gaseous substances is produced. molar mass (NH 4 ) CO 3 = g; 453 C = 76 K 5.0 g = g As 0.54 of (NH 4 ) CO 3 reacts, 4(0.54) =.6 mol of gaseous products result. = (.6 mol)( L atm mol K )(76 K) = = 4 L (.04 atm). CaCO 3 (s) CaO(s) + CO (g) 774 torr =.08 atm; 55 C + 73 = 38 K; molar mass CaCO 3 = 00. g 0.0 g CaCO g = mol CaCO 3 From the balanced equation, mol CO will be produced. = ( mol)( L atm mol K )(38 K) = =.64 L CO (.08 atm). CaCO 3 (s) + H + (aq) Ca + (aq) + H O(l) + CO (g) molar mass CaCO 3 = 00. g; 60 C + 73 = 333 K 0.0 g CaCO g = mol CaCO 3 = mol CO also carbon dioxide = total water vapor carbon dioxide = 774 mm Hg 49.4 mm Hg = 64.6 mm Hg = 0.8 atm wet = ( mol)( L atm mol K )(333 K) = = 3.3 L wet CO (0.8 atm) dry = 3.3 L 64.6 mm Hg 774 mm Hg =.68 L 3. S(s) + 3O (g) SO 3 (g) 350. C + 73 = 63 K; molar mass S = 3.07 g S 5.00 g = mol S 3.07 g S 87
22 3 mol O mol S mol S = mol O = (0.339 mol)( L atm mol K )(63 K) = =.8 L O (5.5 atm) 4. KClO 3 (s) KCl(s) + 3O (g) molar mass KClO 3 =.6 g; 5 C + 73 = 98 K; 630. torr = 0.89 atm KClO g KClO 3.6 g KClO = mol KClO 3 3 mol O mol KClO 3 mol KClO = 0.6 O 3 3 = (0.6)( L atm mol K )(98 K) = = 8. L O (0.89 atm) 5. molar mass He = g He 0.0 g He =.498 mol He g He.498 mol.4 L = 56.0 L He 6. a. 75 mm Hg 0,35 a 760 mm Hg = a b. 458 ka atm 0.35 ka c. 760 mm Hg.43 atm atm d. 84 torr = 84 mm Hg = 4.5 atm = mm Hg 7. a atm b a 760 mm Hg atm = 686 mm Hg 760 mm Hg 0,35 a = mm Hg c. 760 mm 445 ka 0.35 ka = mm Hg d. 34 torr = 34 mm Hg 8. a. 645 mm Hg 0,35 a 760 mm Hg = a 88
23 b. ka = 0 3 a =. 0 5 a 0,35 a c atm = a atm d. 3 torr 0,35 a 760 torr 9. a. 00 mm Hg =.38 atm = a 4.56 atm = 3 L.38 atm = 46 L b. 5. mm Hg = atm 634 ml = atm = 0.7 atm 66 ml c. 5 torr = a = 68. ka 68. ka = 443 L.05 ka = L 0. a..00 mm Hg =.00 torr.00 torr = 55 ml = 8 ml.00 torr b..0 atm = 0.35 ka.0 ka =.3 L 0.35 ka =.3 0 L c..0 mm Hg = 0.33 ka.0 ka =.3 L 0.33 ka = 9.8 L. Assume the pressure at sea level to be atm (760 mm Hg). Calculate the volume the balloon would have if it rose to the point where the pressure has dropped to 500 mm Hg. If this calculated volume is greater than the balloon s specified maximum volume (.5 L), the balloon will burst. 760 mm Hg.0 L = 3.0 L >.5 L. The balloon will burst. 500 mm Hg..5 L = ml 755 mm Hg ml 450 ml = mm Hg 3. C + 73 = 95 K; 00 C + 73 = 373 K 79 ml 373 K = 9 ml 95 K 89
24 4. a. 74 C + 73 = 347 K; 74 C + 73 = 99 K 00. ml 99 K = 57.3 ml 347 K b. 00 C + 73 = 373 K 600 ml 373 K = 448 K (75 C) 500 ml c. zero (the volume of any gas sample becomes zero at 0 K) 5. a. 0 C + 73 = 73 K 73 K 44.4 L = 54 K (68 C).4 L b. 7 C + 73 = K; 5 C + 73 = 98 K ml 98 K K = 0.30 ml c. 40 C + 73 = 33 K 33 K 000 L 3.3 L = K (6940 C) 6. C + 73 = 85 K; 9 C + 73 = 465 K 75. ml 465 K = 3 ml 85 K g O = 0.60 mol; 5.0 g O = L 0.60 mol = 30.3 L 8. For a given gas, the number of moles present in a sample is directly proportional to the mass of the sample. The problem therefore can be solved even though the gas is not identified (so that its molar mass is not known). 3. g 0.4 L 93. L =.59 g 9. a. = 4 ml = 0.4 L (. atm)(0.4 L) T = nr = (0.43 mol)( L atm mol K ) = 84.9 K b. =.3 ml = L = ( mol)( L atm mol K )(93 K) = =.5 atm (0.003 L) c. = 755 mm Hg = atm; T = 3 C + 73 = 404 K 90
25 = (0.473 mol)( L atm mol K )(404 K) = = 5.8 L = ml (0.993 atm) 30. a. =. ml = 0.0 L (.034 atm)(0.0 L) T = = = 6.8 K nr ( mol)( L atm mol K ) b. =.73 ml = L = ( mol)( L atm mol K )(8 K) = = atm ( L) c. =.3 mm Hg = atm; T = 5 C + 73 = 45 K = (0.773 mol)( L atm mol K )(45 K) = = L (0.006 atm) 3. molar mass N = 8.0 g; T = 6 C + 73 = 99 K N n = 4. g N 8.0 g N = mol N = (0.507 mol)( L atm mol K )(99 K) = =.4 atm (0.0 L) 3. 7 C + 73 = 300 K The number of moles of gas it takes to fill the 00. L tanks to 0 atm at 7 C is independent of the identity of the gas. (0 atm)(00. L) n= = = = 487 mol RT ( L atm mol K )(300 K) 487 mol of any gas will fill the tanks to the required specifications. molar masses: CH 4, 6.0 g; N, 8.0 g; CO, 44.0 g for CH 4 : (487 mol)(6.0 g/mol) = 779 g = 7.79 kg CH 4 for N : (487 mol)(8.0 g/mol) = 3,636 g = 3.6 kg N for CO : (487 mol)(44.0 g/mol) =,48 g =.4 kg CO 33. molar mass He = g He n = 4.00 g He = mol He g He (.00 atm)(.4 L) T = = = 73 K = 0 C nr (0.999 mol)( L atm mol K ) 9
26 34. molar mass of O = 3.00 g; 55 mg = g O n = g 3.00 g O = mol = 00. ml = 0.00 L; T = 6 C + 73 = 99 K = (0.007 mol)( L atm mol K )(99 K) = = 0.4 atm (0.00 L) 35. =.0 atm = 0 torr = 0.89 atm =.0 L =? T = 3 C + 73 = 96 K T (4 K)(.0 atm)(.0 L) = T = (96 K)(0.89 atm) =.8 L T = 3 C = 4 K 36. =.3 atm =.89 atm = 00 ml = 0.00 L T = 300 K T =? T (300 K)(.89 atm)(0.500 L) T = = (.3 atm)(0.00 L) =.5 03 K = 500 ml = L Note that the calculation could have been carried through with the two volumes expressed in milliliters because the universal gas constant does not appear explicitly in this form of the ideal gas equation. 37. molar mass of O = 3.00 g; 5 C + 73 = 98 K O 50. g O 3.00 g O =.56 mol O total number of moles of gas =.0 mol N +.56 mol O =.56 mol (.56 mol)( L atm mol K )(98 K) = = = 3 atm (5.0 L) 38. molar masses: N, 8.0 g; He, g; ST:.00 atm, 73 K N. g N 8.0 g N = 0.43 mol N 4.05 g He He g He =.0 He Total moles of gas = 0.43 mol +.0 =.44 mol = (.44 mol)( L atm mol K )(73 K) = = 3.3 L (.00 atm) 9
27 39. The pressures must be expressed in the same units, either mm Hg or atm. hydrogen = total water vapor.03 atm = mm Hg hydrogen = mm Hg 4. mm Hg = mm Hg 4. mm Hg = atm hydrogen =.03 atm atm = atm 40. N (g) + 3H (g) NH 3 (g) molar mass of NH 3 = 7.03 g; C + 73 = 84 K NH g NH g NH = 0.94 mol NH 3 to be produced 3 N 0.94 mol NH 3 mol NH = 0.47 mol N required 3 mol H 0.94 mol NH 3 mol NH = 0.44 H required 3 3 nitrogen = hydrogen = (0.47 mol)( L atm mol K )(84 K) = = 3.43 L N (0.998 atm) (0.44)( L atm mol K )(84 K) = = 0.3 L H (0.998 atm) 4. C 6 H O 6 (s) + 6O (g) CO (g) + 6H O(g) molar mass of C 6 H O 6 = 80. g; 8 C + 73 = 30 K C6HO g C 6 H O g C H O = mol C 6H O mol O mol C 6 H O 6 C H O = mol O 6 6 oxygen = (0.667 mol)( L atm mol K )(30 K) = = 4. L (0.976 atm) Because the coefficients of CO (g) and H O(g) in the balanced chemical equation happen to be the same as the coefficient of O (g), the calculations for the volumes of these gases produced are identical: 4. L of each gaseous product is produced. 4. Cu S(s) + 3O (g) Cu O(s) + SO (g) molar mass Cu S = 59. g; 7.5 C + 73 = 30 K CuS 5 g Cu S 59. g Cu S = mol Cu S 93
28 3 mol O mol Cu S mol Cu S = mol O oxygen = (0.355 mol)( L atm mol K )(30 K) = = 5.8 L O (0.998 atm) mol SO mol Cu S mol Cu S = mol SO sulfur dioxide = (0.570 mol)( L atm mol K )(30 K) = = 3.9 L SO (0.998 atm) 43. NaHCO 3 (s) Na CO 3 (s) + H O(g) + CO (g) molar mass NaHCO 3 = 84.0 g; 9 C + 73 = 30 K; 769 torr =.0 atm NaHCO3.00 g NaHCO g NaHCO = mol NaHCO 3 HO mol NaHCO 3 mol NaHCO = mol H O 3 3 Because H O(g) and CO (g) have the same coefficients in the balanced chemical equation for the reaction, if mol H O is produced, then mol CO must also be produced. The total number of moles of gaseous substances produced is thus = 0.09 mol. total = (0.09 mol)( L atm mol K )(30 K) = = 0.9 L (.0 atm) 44. One mole of any ideal gas occupies.4 L at ST. 35 mol N.4 L = L 45. = atm =.00 atm = 5 L =? T = 5 C + 73 = 98 K T = 73 K T (73 K)(0.987 atm)(5 L) = T = (98 K)(.00 atm) = 3 L 46. molar masses: He, g; Ar, g; Ne, 0.8 g He 5.0 g He =.49 mol He g He.0 g Ar Ar g Ar = mol Ar 94
29 3.5 g Ne Ne 0.8 g Ne = mol Ne Total moles of gas = =.447 mol.4 L is the volume occupied by one mole of any ideal gas at ST. This would apply even if the gas sample is a mixture of individual gases..447 mol.4 L = 3 L total volume for the mixture The partial pressure of each individual gas in the mixture will be related to what fraction on a mole basis each gas represents in the mixture. He =.00 atm Ar =.00 atm Ne =.00 atm.49 mol He.447 mol total mol Ar.447 mol total = 0.86 atm = 0.07 atm mol Ne = 0. atm.447 mol total 47. CaCO 3 (s) CaO(s) + CO (g) molar mass of CaCO 3 = 00. g CaCO3 7.5 g CaCO g CaCO = 0.75 mol CaCO 3 3 From the balanced chemical equation, if 0.75 mol of CaCO 3 reacts, then 0.75 mol of CaCO 3 will be produced mol H.4 L = 6.6 L 48. The solution is only 50% H O. Therefore 5 g solution = 6.5 g H O molar mass of H O = 34.0 g; T = 7 C = 300 K; = 764 mm Hg =.0 atm 6.5 g H O 34.0 g =.84 mol H O O.84 mol H O mol H O = 0.90 mol O = (0.90 mol)( L atm mol K )(300 K) = =.4 L (.0 atm) 95
= 1.038 atm. 760 mm Hg. = 0.989 atm. d. 767 torr = 767 mm Hg. = 1.01 atm
Chapter 13 Gases 1. Solids and liquids have essentially fixed volumes and are not able to be compressed easily. Gases have volumes that depend on their conditions, and can be compressed or expanded by
More informationMULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.
Chapter 10 MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 1) A gas at a pressure of 10.0 Pa exerts a force of N on an area of 5.5 m2. A) 1.8 B) 0.55
More informationThe Gas Laws. Our Atmosphere. Pressure = Units of Pressure. Barometer. Chapter 10
Our Atmosphere The Gas Laws 99% N 2 and O 2 78% N 2 80 70 Nitrogen Chapter 10 21% O 2 1% CO 2 and the Noble Gases 60 50 40 Oxygen 30 20 10 0 Gas Carbon dioxide and Noble Gases Pressure Pressure = Force
More informationGas Laws. The kinetic theory of matter states that particles which make up all types of matter are in constant motion.
Name Period Gas Laws Kinetic energy is the energy of motion of molecules. Gas state of matter made up of tiny particles (atoms or molecules). Each atom or molecule is very far from other atoms or molecules.
More informationTemperature. Number of moles. Constant Terms. Pressure. Answers Additional Questions 12.1
Answers Additional Questions 12.1 1. A gas collected over water has a total pressure equal to the pressure of the dry gas plus the pressure of the water vapor. If the partial pressure of water at 25.0
More informationExam 4 Practice Problems false false
Exam 4 Practice Problems 1 1. Which of the following statements is false? a. Condensed states have much higher densities than gases. b. Molecules are very far apart in gases and closer together in liquids
More informationStoichiometry. 1. The total number of moles represented by 20 grams of calcium carbonate is (1) 1; (2) 2; (3) 0.1; (4) 0.2.
Stoichiometry 1 The total number of moles represented by 20 grams of calcium carbonate is (1) 1; (2) 2; (3) 01; (4) 02 2 A 44 gram sample of a hydrate was heated until the water of hydration was driven
More informationAS1 MOLES. oxygen molecules have the formula O 2 the relative mass will be 2 x 16 = 32 so the molar mass will be 32g mol 1
Moles 1 MOLES The mole the standard unit of amount of a substance the number of particles in a mole is known as Avogadro s constant (L) Avogadro s constant has a value of 6.023 x 10 23 mol 1. Example
More informationF321 MOLES. Example If 1 atom has a mass of 1.241 x 1023 g 1 mole of atoms will have a mass of 1.241 x 1023 g x 6.02 x 10 23 = 7.
Moles 1 MOLES The mole the standard unit of amount of a substance (mol) the number of particles in a mole is known as Avogadro s constant (N A ) Avogadro s constant has a value of 6.02 x 10 23 mol 1.
More information1. What is the molecular formula of a compound with the empirical formula PO and a grammolecular mass of 284 grams?
Name: Tuesday, May 20, 2008 1. What is the molecular formula of a compound with the empirical formula PO and a grammolecular mass of 284 grams? 2 5 1. P2O 5 3. P10O4 2. P5O 2 4. P4O10 2. Which substance
More informationName Class Date. In the space provided, write the letter of the term or phrase that best completes each statement or best answers each question.
Assessment Chapter Test A Chapter: States of Matter In the space provided, write the letter of the term or phrase that best completes each statement or best answers each question. 1. The kineticmolecular
More informationBoyles Law. At constant temperature the volume occupied by a fixed amount of gas is inversely proportional to the pressure on the gas 1 P = P
Boyles Law At constant temperature the volume occupied by a fixed amount of gas is inversely proportional to the pressure on the gas 1 or k 1 Boyles Law Example ressure olume Initial 2.00 atm 100 cm 3
More informationGases. States of Matter. Molecular Arrangement Solid Small Small Ordered Liquid Unity Unity Local Order Gas High Large Chaotic (random)
Gases States of Matter States of Matter Kinetic E (motion) Potential E(interaction) Distance Between (size) Molecular Arrangement Solid Small Small Ordered Liquid Unity Unity Local Order Gas High Large
More informationKinetic Theory of Gases. 6.1 Properties of Gases 6.2 Gas Pressure. Properties That Describe a Gas. Gas Pressure. Learning Check.
Chapter 6 Gases Kinetic Theory of Gases 6.1 Properties of Gases 6.2 Gas Pressure A gas consists of small particles that move rapidly in straight lines. have essentially no attractive (or repulsive) forces.
More informationCHAPTER 12. Gases and the KineticMolecular Theory
CHAPTER 12 Gases and the KineticMolecular Theory 1 Gases vs. Liquids & Solids Gases Weak interactions between molecules Molecules move rapidly Fast diffusion rates Low densities Easy to compress Liquids
More information5. Which temperature is equal to +20 K? 1) 253ºC 2) 293ºC 3) 253 C 4) 293 C
1. The average kinetic energy of water molecules increases when 1) H 2 O(s) changes to H 2 O( ) at 0ºC 3) H 2 O( ) at 10ºC changes to H 2 O( ) at 20ºC 2) H 2 O( ) changes to H 2 O(s) at 0ºC 4) H 2 O( )
More informationESSAY. Write your answer in the space provided or on a separate sheet of paper.
Test 1 General Chemistry CH116 Summer, 2012 University of Massachusetts, Boston Name ESSAY. Write your answer in the space provided or on a separate sheet of paper. 1) Sodium hydride reacts with excess
More informationGas Laws. vacuum. 760 mm. air pressure. mercury
Gas Laws Some chemical reactions take place in the gas phase and others produce products that are gases. We need a way to measure the quantity of compounds in a given volume of gas and relate that to moles.
More information87 16 70 20 58 24 44 32 35 40 29 48 (a) graph Y versus X (b) graph Y versus 1/X
HOMEWORK 5A Barometer; Boyle s Law 1. The pressure of the first two gases below is determined with a manometer that is filled with mercury (density = 13.6 g/ml). The pressure of the last two gases below
More informationProblem Solving. Stoichiometry of Gases
Skills Worksheet Problem Solving Stoichiometry of Gases Now that you have worked with relationships among moles, mass, and volumes of gases, you can easily put these to work in stoichiometry calculations.
More informationChapter 3 Mass Relationships in Chemical Reactions
Chapter 3 Mass Relationships in Chemical Reactions Student: 1. An atom of bromine has a mass about four times greater than that of an atom of neon. Which choice makes the correct comparison of the relative
More informationLecture Notes: Gas Laws and Kinetic Molecular Theory (KMT).
CHEM110 Week 9 Notes (Gas Laws) Page 1 of 7 Lecture Notes: Gas Laws and Kinetic Molecular Theory (KMT). Gases Are mostly empty space Occupy containers uniformly and completely Expand infinitely Diffuse
More informationEXPERIMENT 15: Ideal Gas Law: Molecular Weight of a Vapor
EXPERIMENT 15: Ideal Gas Law: Molecular Weight of a Vapor Purpose: In this experiment you will use the ideal gas law to calculate the molecular weight of a volatile liquid compound by measuring the mass,
More informationCHEMISTRY. Matter and Change. Section 13.1 Section 13.2 Section 13.3. The Gas Laws The Ideal Gas Law Gas Stoichiometry
CHEMISTRY Matter and Change 13 Table Of Contents Chapter 13: Gases Section 13.1 Section 13.2 Section 13.3 The Gas Laws The Ideal Gas Law Gas Stoichiometry State the relationships among pressure, temperature,
More informationChemistry 110 Lecture Unit 5 Chapter 11GASES
Chemistry 110 Lecture Unit 5 Chapter 11GASES I. PROPERITIES OF GASES A. Gases have an indefinite shape. B. Gases have a low density C. Gases are very compressible D. Gases exert pressure equally in all
More informationCHEMISTRY GAS LAW S WORKSHEET
Boyle s Law Charles Law GuyLassac's Law Combined Gas Law For a given mass of gas at constant temperature, the volume of a gas varies inversely with pressure PV = k The volume of a fixed mass of gas is
More informationChem 1A Exam 2 Review Problems
Chem 1A Exam 2 Review Problems 1. At 0.967 atm, the height of mercury in a barometer is 0.735 m. If the mercury were replaced with water, what height of water (in meters) would be supported at this pressure?
More informationChapter 5 Chemical Quantities and Reactions. Collection Terms. 5.1 The Mole. A Mole of a Compound. A Mole of Atoms.
Chapter 5 Chemical Quantities and Reactions 5.1 The Mole Collection Terms A collection term states a specific number of items. 1 dozen donuts = 12 donuts 1 ream of paper = 500 sheets 1 case = 24 cans 1
More information2. The percent yield is the maximum amount of product that can be produced from the given amount of limiting reactant.
UNIT 6 stoichiometry practice test True/False Indicate whether the statement is true or false. moles F 1. The mole ratio is a comparison of how many grams of one substance are required to participate in
More informationMoles. Balanced chemical equations Molar ratios Mass Composition Empirical and Molecular Mass Predicting Quantities Equations
Moles Balanced chemical equations Molar ratios Mass Composition Empirical and Molecular Mass Predicting Quantities Equations Micro World atoms & molecules Macro World grams Atomic mass is the mass of an
More informationGases and KineticMolecular Theory: Chapter 12. Chapter Outline. Chapter Outline
Gases and KineticMolecular heory: Chapter Chapter Outline Comparison of Solids, Liquids, and Gases Composition of the Atmosphere and Some Common Properties of Gases Pressure Boyle s Law: he VolumePressure
More informationSample Exercise 3.1 Interpreting and Balancing Chemical Equations
Sample Exercise 3.1 Interpreting and Balancing Chemical Equations The following diagram represents a chemical reaction in which the red spheres are oxygen atoms and the blue spheres are nitrogen atoms.
More informationChapter 3: Stoichiometry
Chapter 3: Stoichiometry Key Skills: Balance chemical equations Predict the products of simple combination, decomposition, and combustion reactions. Calculate formula weights Convert grams to moles and
More informationIB Chemistry. DP Chemistry Review
DP Chemistry Review Topic 1: Quantitative chemistry 1.1 The mole concept and Avogadro s constant Assessment statement Apply the mole concept to substances. Determine the number of particles and the amount
More informationThe Mole. Chapter 10. Dimensional Analysis. The Mole. How much mass is in one atom of carbon12? Molar Mass of Atoms 3/1/2015
The Mole Chapter 10 1 Objectives Use the mole and molar mass to make conversions among moles, mass, and number of particles Determine the percent composition of the components of a compound Calculate empirical
More informationCHEM 105 HOUR EXAM III 28OCT99. = 163 kj/mole determine H f 0 for Ni(CO) 4 (g) = 260 kj/mole determine H f 0 for Cr(CO) 6 (g)
CHEM 15 HOUR EXAM III 28OCT99 NAME (please print) 1. a. given: Ni (s) + 4 CO (g) = Ni(CO) 4 (g) H Rxn = 163 k/mole determine H f for Ni(CO) 4 (g) b. given: Cr (s) + 6 CO (g) = Cr(CO) 6 (g) H Rxn = 26
More informationStoichiometry. 1. The total number of moles represented by 20 grams of calcium carbonate is (1) 1; (2) 2; (3) 0.1; (4) 0.2.
Stoichiometry 1 The total number of moles represented by 20 grams of calcium carbonate is (1) 1; (2) 2; (3) 01; (4) 02 2 A 44 gram sample of a hydrate was heated until the water of hydration was driven
More informationChapter 13 Gases. Review Skills
Chapter 13 Gases t s Monday morning, and Lilia is walking out of the chemistry building, thinking about the introductory lecture on gases that her instructor just presented. Dr. Scanlon challenged the
More informationChapter 1 The Atomic Nature of Matter
Chapter 1 The Atomic Nature of Matter 6. Substances that cannot be decomposed into two or more simpler substances by chemical means are called a. pure substances. b. compounds. c. molecules. d. elements.
More informationStoichiometry V = 9.98 L CO2. 34.0 ml H 2 SO 4 soln 6.0 mol H 2 SO. 1000 ml H 2 SO 4 soln. 2 mol CO = 0.408 mol CO 2 1 mol H 2 SO 4
Stoichiometry We cannot count molecules so instead we weigh them; however, it is etremely inconvenient to weigh gases. So, when adding gases to a reaction how do we measure the amount of gas? We use the
More informationGases. Macroscopic Properties. Petrucci, Harwood and Herring: Chapter 6
Gases Petrucci, Harwood and Herring: Chapter 6 CHEM 1000A 3.0 Gases 1 We will be looking at Macroscopic and Microscopic properties: Macroscopic Properties of bulk gases Observable Pressure, volume, mass,
More informationMULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.
Exam Name MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 1) Given: 4 NO2(g) + O2(g) 2 N2O5(g) ΔH = 110.2 kj find ΔH for N2O5(g) 2 NO2(g) + 1/2 O2(g).
More informationMULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.
General Chemistry PHS 1015 Practice Exam 4 Name MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 1) Which of the following statements about pressure
More informationCalculations and Chemical Equations. Example: Hydrogen atomic weight = 1.008 amu Carbon atomic weight = 12.001 amu
Calculations and Chemical Equations Atomic mass: Mass of an atom of an element, expressed in atomic mass units Atomic mass unit (amu): 1.661 x 1024 g Atomic weight: Average mass of all isotopes of a given
More informationW1 WORKSHOP ON STOICHIOMETRY
INTRODUCTION W1 WORKSHOP ON STOICHIOMETRY These notes and exercises are designed to introduce you to the basic concepts required to understand a chemical formula or equation. Relative atomic masses of
More information1. How many hydrogen atoms are in 1.00 g of hydrogen?
MOLES AND CALCULATIONS USING THE MOLE CONCEPT INTRODUCTORY TERMS A. What is an amu? 1.66 x 1024 g B. We need a conversion to the macroscopic world. 1. How many hydrogen atoms are in 1.00 g of hydrogen?
More informationDETERMINING THE MOLAR MASS OF CARBON DIOXIDE
DETERMINING THE MOLAR MASS OF CARBON DIOXIDE PURPOSE: The goal of the experiment is to determine the molar mass of carbon dioxide and compare the experimentally determined value to the theoretical value.
More informationChemistry 13: States of Matter
Chemistry 13: States of Matter Name: Period: Date: Chemistry Content Standard: Gases and Their Properties The kinetic molecular theory describes the motion of atoms and molecules and explains the properties
More informationMolar Mass of Butane
Cautions Butane is toxic and flammable. No OPEN Flames should be used in this experiment. Purpose The purpose of this experiment is to determine the molar mass of butane using Dalton s Law of Partial Pressures
More information7. Gases, Liquids, and Solids 7.1 Kinetic Molecular Theory of Matter
7. Gases, Liquids, and Solids 7.1 Kinetic Molecular Theory of Matter Kinetic Molecular Theory of Matter The Kinetic Molecular Theory of Matter is a concept that basically states that matter is composed
More informationChemistry: Chemical Equations
Chemistry: Chemical Equations Write a balanced chemical equation for each word equation. Include the phase of each substance in the equation. Classify the reaction as synthesis, decomposition, single replacement,
More informationChapter 3. Chemical Reactions and Reaction Stoichiometry. Lecture Presentation. James F. Kirby Quinnipiac University Hamden, CT
Lecture Presentation Chapter 3 Chemical Reactions and Reaction James F. Kirby Quinnipiac University Hamden, CT The study of the mass relationships in chemistry Based on the Law of Conservation of Mass
More informationChapter 1: Moles and equations. Learning outcomes. you should be able to:
Chapter 1: Moles and equations 1 Learning outcomes you should be able to: define and use the terms: relative atomic mass, isotopic mass and formula mass based on the 12 C scale perform calculations, including
More informationMole Calculations Multiple Choice Review PSI Chemistry
Mole Calculations Multiple Choice Review PSI Chemistry Name The Mole and Avogadro's Number 1)What is the SI unit for measurement of number of particles in a substance? A) kilogram B) ampere C) candela
More informationType: Single Date: Kinetic Theory of Gases. Homework: Read (14.1), Do CONCEPT Q. # (1), Do PROBLEMS # (2, 3, 5) Ch. 14
Type: Single Date: Objective: Kinetic Theory of Gases Homework: Read (14.1), Do CONCEPT Q. # (1), Do PROBLEMS # (2, 3, 5) Ch. 14 AP Physics Mr. Mirro Kinetic Theory of Gases Date Unlike the condensed phases
More informationConcept 1. The meaning and usefulness of the mole. The mole (or mol) represents a certain number of objects.
Chapter 3. Stoichiometry: MoleMass Relationships in Chemical Reactions Concept 1. The meaning and usefulness of the mole The mole (or mol) represents a certain number of objects. SI def.: the amount of
More informationMoles. Moles. Moles. Moles. Balancing Eqns. Balancing. Balancing Eqns. Symbols Yields or Produces. Like a recipe:
Like a recipe: Balancing Eqns Reactants Products 2H 2 (g) + O 2 (g) 2H 2 O(l) coefficients subscripts Balancing Eqns Balancing Symbols (s) (l) (aq) (g) or Yields or Produces solid liquid (pure liquid)
More informationCHEMICAL EQUILIBRIUM (ICE METHOD)
CHEMICAL EQUILIBRIUM (ICE METHOD) Introduction Chemical equilibrium occurs when opposing reactions are proceeding at equal rates. The rate at which the products are formed from the reactants equals the
More informationChemistry B11 Chapter 4 Chemical reactions
Chemistry B11 Chapter 4 Chemical reactions Chemical reactions are classified into five groups: A + B AB Synthesis reactions (Combination) H + O H O AB A + B Decomposition reactions (Analysis) NaCl Na +Cl
More informationStoichiometry. Lecture Examples Answer Key
Stoichiometry Lecture Examples Answer Key Ex. 1 Balance the following chemical equations: 3 NaBr + 1 H 3 PO 4 3 HBr + 1 Na 3 PO 4 2 C 3 H 5 N 3 O 9 6 CO 2 + 3 N 2 + 5 H 2 O + 9 O 2 2 Ca(OH) 2 + 2 SO 2
More informationEXPERIMENT 12: Empirical Formula of a Compound
EXPERIMENT 12: Empirical Formula of a Compound INTRODUCTION Chemical formulas indicate the composition of compounds. A formula that gives only the simplest ratio of the relative number of atoms in a compound
More informationFormulas, Equations and Moles
Chapter 3 Formulas, Equations and Moles Interpreting Chemical Equations You can interpret a balanced chemical equation in many ways. On a microscopic level, two molecules of H 2 react with one molecule
More information1.4.61.4.8 Gas Laws. Heat and Temperature
1.4.61.4.8 Gas Laws Heat and Temperature Often the concepts of heat and temperature are thought to be the same, but they are not. Perhaps the reason the two are incorrectly thought to be the same is because
More informationChapter 10. Can You... 1. draw the Lewis structure for a given covalently bonded molecule?
Chapter 10 Can You... 1. draw the Lewis structure for a given covalently bonded molecule? e.g. SF 6 and CH 3 Cl 2. identify and count the number of nonbonding and bonding domains within a given covalently
More informationChemical Calculations: Formula Masses, Moles, and Chemical Equations
Chemical Calculations: Formula Masses, Moles, and Chemical Equations Atomic Mass & Formula Mass Recall from Chapter Three that the average mass of an atom of a given element can be found on the periodic
More information= 800 kg/m 3 (note that old units cancel out) 4.184 J 1000 g = 4184 J/kg o C
Units and Dimensions Basic properties such as length, mass, time and temperature that can be measured are called dimensions. Any quantity that can be measured has a value and a unit associated with it.
More informationCalculating Atoms, Ions, or Molecules Using Moles
TEKS REVIEW 8B Calculating Atoms, Ions, or Molecules Using Moles TEKS 8B READINESS Use the mole concept to calculate the number of atoms, ions, or molecules in a sample TEKS_TXT of material. Vocabulary
More informationCalculation of Molar Masses. Molar Mass. Solutions. Solutions
Molar Mass Molar mass = Mass in grams of one mole of any element, numerically equal to its atomic weight Molar mass of molecules can be determined from the chemical formula and molar masses of elements
More informationHEAT UNIT 1.1 KINETIC THEORY OF GASES. 1.1.1 Introduction. 1.1.2 Postulates of Kinetic Theory of Gases
UNIT HEAT. KINETIC THEORY OF GASES.. Introduction Molecules have a diameter of the order of Å and the distance between them in a gas is 0 Å while the interaction distance in solids is very small. R. Clausius
More informationATOMS. Multiple Choice Questions
Chapter 3 ATOMS AND MOLECULES Multiple Choice Questions 1. Which of the following correctly represents 360 g of water? (i) 2 moles of H 2 0 (ii) 20 moles of water (iii) 6.022 10 23 molecules of water (iv)
More informationCHEM 120 Online Chapter 7
CHEM 120 Online Chapter 7 Date: 1. Which of the following statements is not a part of kinetic molecular theory? A) Matter is composed of particles that are in constant motion. B) Particle velocity increases
More informationReview  After School Matter Name: Review  After School Matter Tuesday, April 29, 2008
Name: Review  After School Matter Tuesday, April 29, 2008 1. Figure 1 The graph represents the relationship between temperature and time as heat was added uniformly to a substance starting at a solid
More informationMASS RELATIONSHIPS IN CHEMICAL REACTIONS
MASS RELATIONSHIPS IN CHEMICAL REACTIONS 1. The mole, Avogadro s number and molar mass of an element. Molecular mass (molecular weight) 3. Percent composition of compounds 4. Empirical and Molecular formulas
More informationChapter 8: Gases and Gas Laws.
133 Chapter 8: Gases and Gas Laws. The first substances to be produced and studied in high purity were gases. Gases are more difficult to handle and manipulate than solids and liquids, since any minor
More informationTemperature Measure of KE At the same temperature, heavier molecules have less speed Absolute Zero 273 o C 0 K
Temperature Measure of KE At the same temperature, heavier molecules have less speed Absolute Zero 273 o C 0 K Kinetic Molecular Theory of Gases 1. Large number of atoms/molecules in random motion 2.
More informationOther Stoich Calculations A. mole mass (mass mole) calculations. GIVEN mol A x CE mol B. PT g A CE mol A MOLE MASS :
Chem. I Notes Ch. 12, part 2 Using Moles NOTE: Vocabulary terms are in boldface and underlined. Supporting details are in italics. 1 MOLE = 6.02 x 10 23 representative particles (representative particles
More informationPage 2. Base your answers to questions 7 through 9 on this phase diagram
1. The normal boiling point of water is often depressed at high altitudes. Which of the following explains this phenomenon? t high altitudes, the lower atmospheric pressure equals the equilibrium water
More information13.1 The Nature of Gases. What is Kinetic Theory? Kinetic Theory and a Model for Gases. Chapter 13: States of Matter. Principles of Kinetic Theory
Chapter 13: States of Matter The Nature of Gases The Nature of Gases kinetic molecular theory (KMT), gas pressure (pascal, atmosphere, mm Hg), kinetic energy The Nature of Liquids vaporization, evaporation,
More informationChapter 8  Chemical Equations and Reactions
Chapter 8  Chemical Equations and Reactions 81 Describing Chemical Reactions I. Introduction A. Reactants 1. Original substances entering into a chemical rxn B. Products 1. The resulting substances from
More informationCalculations with Chemical Formulas and Equations
Chapter 3 Calculations with Chemical Formulas and Equations Concept Check 3.1 You have 1.5 moles of tricycles. a. How many moles of seats do you have? b. How many moles of tires do you have? c. How could
More informationBalance the following equation: KClO 3 + C 12 H 22 O 11 KCl + CO 2 + H 2 O
Balance the following equation: KClO 3 + C 12 H 22 O 11 KCl + CO 2 + H 2 O Ans: 8 KClO 3 + C 12 H 22 O 11 8 KCl + 12 CO 2 + 11 H 2 O 3.2 Chemical Symbols at Different levels Chemical symbols represent
More informationCSUS Department of Chemistry Experiment 8 Chem.1A
EXPERIMENT #8 Name: PRELABORATORY ASSIGNMENT: Lab Section 1. The alkali metals are so reactive that they react directly with water in the absence of acid. For example, potassium reacts with water as follows:
More informationChapter 3! Stoichiometry: Calculations with Chemical Formulas and Equations. Stoichiometry
Chapter 3! : Calculations with Chemical Formulas and Equations Anatomy of a Chemical Equation CH 4 (g) + 2O 2 (g) CO 2 (g) + 2 H 2 O (g) Anatomy of a Chemical Equation CH 4 (g) + 2 O 2 (g) CO 2 (g) + 2
More informationCP Chemistry Review for Stoichiometry Test
CP Chemistry Review for Stoichiometry Test Stoichiometry Problems (one given reactant): 1. Make sure you have a balanced chemical equation 2. Convert to moles of the known substance. (Use the periodic
More informationStoichiometry: Baking Soda and Vinegar Reactions
Stoichiometry: Baking Soda and Vinegar Reactions California Science Content Standards: Teacher Version 3. Conservation of Matter and Stoichiometry: The conservation of atoms in chemical reactions leads
More information2014 Spring CHEM101 Ch12 Review Worksheet Modified by Dr. ChengYu Lai,
Ch1 1) Which of the following underlined items is not an intensive property? A) A chemical reaction requires 3.00 g of oxygen. B) The density of helium at 25 C is 1.64 104 g/cm3. C) The melting point
More informationAppendix D. Reaction Stoichiometry D.1 INTRODUCTION
Appendix D Reaction Stoichiometry D.1 INTRODUCTION In Appendix A, the stoichiometry of elements and compounds was presented. There, the relationships among grams, moles and number of atoms and molecules
More informationStoichiometry. Unit Outline
3 Stoichiometry Unit Outline 3.1 The Mole and Molar Mass 3.2 Stoichiometry and Compound Formulas 3.3 Stoichiometry and Chemical Reactions 3.4 Stoichiometry and Limiting Reactants 3.5 Chemical Analysis
More informationCHEMICAL REACTIONS AND REACTING MASSES AND VOLUMES
CHEMICAL REACTIONS AND REACTING MASSES AND VOLUMES The meaning of stoichiometric coefficients: 2 H 2 (g) + O 2 (g) 2 H 2 O(l) number of reacting particles 2 molecules of hydrogen react with 1 molecule
More informationBalancing Chemical Equations
Balancing Chemical Equations Academic Success Center Science Tutoring Area Science Tutoring Area Law of Conservation of Mass Matter cannot be created nor destroyed Therefore the number of each type of
More informationStates of Matter CHAPTER 10 REVIEW SECTION 1. Name Date Class. Answer the following questions in the space provided.
CHAPTER 10 REVIEW States of Matter SECTION 1 SHORT ANSWER Answer the following questions in the space provided. 1. Identify whether the descriptions below describe an ideal gas or a real gas. ideal gas
More information4.4 Calculations Involving the Mole Concept
44 Section 43 Questions 1 Define Avogadro s constant, and explain its significance in quantitative analysis 2 Distinguish between the terms atomic mass and molar mass 3 Calculate the mass of a molecule
More informationChem 1100 Chapter Three Study Guide Answers Outline I. Molar Mass and Moles A. Calculations of Molar Masses
Chem 1100 Chapter Three Study Guide Answers Outline I. Molar Mass and Moles A. Calculations of Molar Masses B. Calculations of moles C. Calculations of number of atoms from moles/molar masses 1. Avagadro
More informationTest Review # 9. Chemistry R: Form TR9.13A
Chemistry R: Form TR9.13A TEST 9 REVIEW Name Date Period Test Review # 9 Collision theory. In order for a reaction to occur, particles of the reactant must collide. Not all collisions cause reactions.
More informationCHEM 120 Online: Chapter 6 Sample problems Date: 2. Which of the following compounds has the largest formula mass? A) H2O B) NH3 C) CO D) BeH2
CHEM 120 Online: Chapter 6 Sample problems Date: 1. To determine the formula mass of a compound you should A) add up the atomic masses of all the atoms present. B) add up the atomic masses of all the atoms
More informationCHEMISTRY 113 EXAM 4(A)
Summer 2003 1. The molecular geometry of PF 4 + ion is: A. bent B. trigonal planar C. tetrahedral D. octahedral CHEMISTRY 113 EXAM 4(A) 2. The ClCCl bond angle in CCl 2 O molecule (C is the central atom)
More informationMr. Bracken. Multiple Choice Review: Thermochemistry
Mr. Bracken AP Chemistry Name Period Multiple Choice Review: Thermochemistry 1. If this has a negative value for a process, then the process occurs spontaneously. 2. This is a measure of how the disorder
More informationChapter 6 Chemical Calculations
Chapter 6 Chemical Calculations 1 Submicroscopic Macroscopic 2 Chapter Outline 1. Formula Masses (Ch 6.1) 2. Percent Composition (supplemental material) 3. The Mole & Avogadro s Number (Ch 6.2) 4. Molar
More informationTHE MOLE / COUNTING IN CHEMISTRY
1 THE MOLE / COUNTING IN CHEMISTRY ***A mole is 6.0 x 10 items.*** 1 mole = 6.0 x 10 items 1 mole = 60, 00, 000, 000, 000, 000, 000, 000 items Analogy #1 1 dozen = 1 items 18 eggs = 1.5 dz.  to convert
More informationElement of same atomic number, but different atomic mass o Example: Hydrogen
Atomic mass: p + = protons; e  = electrons; n 0 = neutrons p + + n 0 = atomic mass o For carbon12, 6p + + 6n 0 = atomic mass of 12.0 o For chlorine35, 17p + + 18n 0 = atomic mass of 35.0 atomic mass
More information