lkml.org 
[lkml]   [2018]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC] usb: chipidea: Add minimal support for HSIC interface on i.MX6QDL
From
Date
Hi Peter,

On 09.10.2018 03:24, Peter Chen wrote:
>
>>
>> The topic has been discussed before: [1] And there is some implementation in the
>> vendor kernel: [2]
>>
>> It seems like two things need to be done:
>>
>> 1. Switch the pinmux of the strobe signal to use a pullup after
>> the core has been initialized.
>> 2. Enable HSIC mode and HSIC clock
>>
>> This patch only implements these basics in a minimal approach.
>> You need to have an additional pinmux setting "active" in the dt, that sets the pullup.
>>
>> It was tested with the SMSC LAN9730 USB Ethernet adapter on the iMXceet Solo S
>> board.
>>
>
> Thanks, I should do it earlier, I could not find a suitable board with HSIC support at mainline kernel.
> It is very kind that you could help on it and test function at real board. My suggestion is
> follow all flows in Link [2] since we need to cover suspend/resume and remote wakeup.

It seems like power management and other things in the linux-imx kernel
are not fully implemented in mainline so there are quite a few differences.

My knowledge of USB, etc. is very limited, so I guess this is currently
beyond my skills. Can you or someone else provide a patch to get
started? I could help with testing, reviewing, etc.

Or maybe you can point out what needs to be done in more detail?

Thanks,
Frieder

\
 
 \ /
  Last update: 2018-10-10 14:53    [W:0.135 / U:14.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site