lkml.org 
[lkml]   [2018]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 2/2] dt-bindings: mailbox: Add Xilinx IPI Mailbox
On Wed, Oct 10, 2018 at 12:18:32AM -0700, Wendy Liang wrote:
> Xilinx ZynqMP IPI(Inter Processor Interrupt) is a hardware block
> in ZynqMP SoC used for the communication between various processor
> systems.
>
> Signed-off-by: Wendy Liang <wendy.liang@xilinx.com>

[...]

> +Optional properties:
> +--------------------
> +- method: The method of accessing the IPI agent registers.
> + Permitted values are: "smc" and "hvc". Default is
> + "smc".

You are mixing the hardware messaging based mailbox and the software
"smc/hvc" based mailbox together here. Please keep them separated.
IIUC smc/hvc based mailcox is used for "tx" or too keep it simple in
one direction and hardware based is used for "rx" or the other direction
for communication.

You *should not* mix them as single unit. Also lots of other vendor need
SMC/HVC based mailbox. So make it generic and keep it separate.

--
Regards,
Sudeep

\
 
 \ /
  Last update: 2018-10-10 11:58    [W:0.083 / U:0.988 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site