lkml.org 
[lkml]   [2018]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/7] dt-bindings: mfd: ds90ux9xx: add description of TI DS90Ux9xx ICs
 On Mon, Oct 8, 2018 at 11:12 PM Vladimir Zapolskiy <vz@mleia.com> wrote:
> From: Sandeep Jain <Sandeep_Jain@mentor.com>
(...)
> +- ti,pixel-clock-edge : Selects Pixel Clock Edge.
> + Possible values are "<1>" or "<0>".
> + If "ti,pixel-clock-edge" is High <1>, output data is strobed on the
> + Rising edge of the PCLK. If ti,pixel-clock-edge is Low <0>, data is
> + strobed on the Falling edge of the PCLK.
> + If "ti,pixel-clock-edge" is not mentioned, the pixel clock edge
> + value is not touched and given by hardware pin strapping.

Please use the existing binding in
Documentation/devicetree/bindings/display/panel/display-timing.txt
for this: pixelclk-active = [<0>|<1>];

Please reference the above document in your binding.

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2018-10-10 10:43    [W:0.461 / U:1.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site