lkml.org 
[lkml]   [2018]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 24/43] drm/bridge: analogix_dp: Reset aux channel if an error occurred
On Fri, Jan 26, 2018 at 02:16:51PM +0100, Thierry Escande wrote:
> From: Lin Huang <hl@rock-chips.com>
>
> AUX errors are caused by many different reasons. We may not know what
> happened in aux channel on failure, so let's reset aux channel if some
> errors occurred.
>
> Cc: 征增 王 <wzz@rock-chips.com>
> Cc: Douglas Anderson <dianders@chromium.org>
> Signed-off-by: Lin Huang <hl@rock-chips.com>
> Signed-off-by: Sean Paul <seanpaul@chromium.org>
> Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
> ---
> drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 18 ++++++++++++++----
> 1 file changed, 14 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> index dee1ba109b5f..7b7fd227e1f9 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> @@ -466,6 +466,10 @@ void analogix_dp_init_aux(struct analogix_dp_device *dp)
> reg = RPLY_RECEIV | AUX_ERR;
> writel(reg, dp->reg_base + ANALOGIX_DP_INT_STA);
>
> + analogix_dp_set_analog_power_down(dp, AUX_BLOCK, true);
> + usleep_range(10, 11);

This is kind of lame. I don't think this needs to be _exactly_ 10us, even 10/20 would be
an improvement. Since this is so infrequent, it's not a dealbreaker either way, I guess.

Sean

> + analogix_dp_set_analog_power_down(dp, AUX_BLOCK, false);
> +
> analogix_dp_reset_aux(dp);
>
> /* Disable AUX transaction H/W retry */
> @@ -1159,7 +1163,7 @@ ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
> reg, !(reg & AUX_EN), 25, 500 * 1000);
> if (ret) {
> dev_err(dp->dev, "AUX CH enable timeout!\n");
> - return -ETIMEDOUT;
> + goto aux_error;
> }
>
> /* TODO: Wait for an interrupt instead of looping? */
> @@ -1168,7 +1172,7 @@ ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
> reg, reg & RPLY_RECEIV, 10, 20 * 1000);
> if (ret) {
> dev_err(dp->dev, "AUX CH cmd reply timeout!\n");
> - return -ETIMEDOUT;
> + goto aux_error;
> }
>
> /* Clear interrupt source for AUX CH command reply */
> @@ -1178,7 +1182,7 @@ ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
> reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA);
> if (reg & AUX_ERR) {
> writel(AUX_ERR, dp->reg_base + ANALOGIX_DP_INT_STA);
> - return -EREMOTEIO;
> + goto aux_error;
> }
>
> /* Check AUX CH error access status */
> @@ -1186,7 +1190,7 @@ ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
> if ((reg & AUX_STATUS_MASK)) {
> dev_err(dp->dev, "AUX CH error happened: %d\n\n",
> reg & AUX_STATUS_MASK);
> - return -EREMOTEIO;
> + goto aux_error;
> }
>
> if (msg->request & DP_AUX_I2C_READ) {
> @@ -1212,4 +1216,10 @@ ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
> msg->reply = DP_AUX_NATIVE_REPLY_ACK;
>
> return num_transferred > 0 ? num_transferred : -EBUSY;
> +
> +aux_error:
> + /* if aux err happen, reset aux */
> + analogix_dp_init_aux(dp);
> +
> + return -EREMOTEIO;
> }
> --
> 2.14.1
>

--
Sean Paul, Software Engineer, Google / Chromium OS

\
 
 \ /
  Last update: 2018-01-29 22:28    [W:0.227 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site