lkml.org 
[lkml]   [2018]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v6 00/41] ARM: davinci: convert to common clock framework​
2018-01-23 18:03 GMT+01:00 Adam Ford <aford173@gmail.com>:
> On Tue, Jan 23, 2018 at 10:06 AM, David Lechner <david@lechnology.com> wrote:
>> On 01/23/2018 10:03 AM, David Lechner wrote:
>>>
>>> You can see if the clock is enabled by running:
>>>
>>> cat /sys/kernel/debug/clk/clk_summary
>>>
>>
>> I just realized if you can't boot, you can't do this. :-/
>
> I can boot with the latest set in your git repo, but the Ethernet
> doesn't apparently fully operate. I don't get errors, but I cannot
> get a dhcp address.
>
> I'll try to do a more exhaustive test later today to get an idea of
> what works and what doesn't. When I ran my basic tests, I just did a
> feel-good boot test (and reboot test)
>
> adam

FYI: manually calling clk_prepare_enable() in the davinci_mdio driver
seems to at least fix the ethernet. In master branch it's done by
pm_runtime_get_sync() (in davinci_mdio_reset()). However I'm still
getting several oopses and WARNs so there's some more work to do.

Thanks,
Bartosz

\
 
 \ /
  Last update: 2018-01-23 19:10    [W:0.079 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site