lkml.org 
[lkml]   [2018]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 12/44] clk: davinci: Add platform information for TI DA850 PSC
From
Date
On Thursday 18 January 2018 12:38 AM, David Lechner wrote:
> It is looking like this:
>
>
> static const struct davinci_psc_clkdev_info emfia_clkdev[] __initconst = {
>     LPSC_CLKDEV(NULL,    "ti-aemif"),
>     LPSC_CLKDEV("aemif",    "davinci-nand.0"),
>     { }
> };
>
> static const struct davinci_psc_clkdev_info spi0_clkdev[] __initconst = {
>     LPSC_CLKDEV(NULL,    "spi_davinci.0"),
>     { }
> };
>
> static const struct davinci_psc_clkdev_info mmcsd0_clkdev[] __initconst = {
>     LPSC_CLKDEV(NULL,    "da830-mmc.0"),
>     { }
> };
>
> static const struct davinci_psc_clkdev_info uart0_clkdev[] __initconst = {
>     LPSC_CLKDEV(NULL,    "serial8250.0"),
>     { }
> };
>
> static const struct davinci_psc_clkdev_info arm_clkdev[] __initconst = {
>     /*
>      * REVISIT: cpufreq-davinci should be modified to use dev_id and drop
>      * use of con_id.
>      */
>     LPSC_CLKDEV("arm",    NULL),
>     { }
> };
>
> static const struct davinci_psc_clkdev_info dsp_clkdev[] __initconst = {
>     LPSC_CLKDEV(NULL,    "davinci-rproc.0"),
>     { }
> };
>
> static const struct davinci_psc_clk_info da850_psc0_info[] __initconst = {
>     LPSC(0,  0, tpcc0,   pll0_sysclk2, NULL,          LPSC_ALWAYS_ENABLED),
>     LPSC(1,  0, tptc0,   pll0_sysclk2, NULL,          LPSC_ALWAYS_ENABLED),
>     LPSC(2,  0, tptc1,   pll0_sysclk2, NULL,          LPSC_ALWAYS_ENABLED),
>     LPSC(3,  0, emifa,   async1,       emfia_clkdev,  0),
>     LPSC(4,  0, spi0,    pll0_sysclk2, spi0_clkdev,   0),
>     LPSC(5,  0, mmcsd0,  pll0_sysclk2, mmcsd0_clkdev, 0),
>     LPSC(6,  0, aintc,   pll0_sysclk4, NULL,          LPSC_ALWAYS_ENABLED),
>     LPSC(7,  0, arm_rom, pll0_sysclk2, NULL,          LPSC_ALWAYS_ENABLED),
>     LPSC(9,  0, uart0,   pll0_sysclk2, uart0_clkdev,  0),
>     LPSC(13, 0, pruss,   pll0_sysclk2, NULL,          0),
>     LPSC(14, 0, arm,     pll0_sysclk6, arm_clkdev,    LPSC_ALWAYS_ENABLED |
>                               LPSC_ARM_RATE),
>     LPSC(15, 1, dsp,     pll0_sysclk1, dsp_clkdev,    LPSC_FORCE |
>                               LPSC_LOCAL_RESET),
>     { }
> };

This looks good to me!

Regards,
Sekhar

\
 
 \ /
  Last update: 2018-01-18 07:38    [W:0.109 / U:0.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site