lkml.org 
[lkml]   [2018]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 4.9 27/75] net: igmp: Use correct source address on IGMPv3 reports
From
Date
>> easy answer from wikipedia. 224.0.x.x is not the only multicast block
> AFAICT the code that was changed by this patch should not have
> anything to do with other multicast blocks. It generates an IGMPv3
> report with destination address 224.0.0.22. So it would be useful to
> get more information on how exactly it is causing a failure, so we can
> find the root cause.
from your code it always returns 0.0.0.0 and not the correct origin if
your rule doesnt match. this is a different behaviour. before, the
origin was used as is and not modified.
if the origin is set to zero, the routing of the network doesnt work
anymore. this works for local multicast addresses, but not for neighbor
networks which are using the routing table
but correct me if i'm wrong


--
Mit freundlichen Grüssen / Regards

Sebastian Gottschall / CTO

NewMedia-NET GmbH - DD-WRT
Firmensitz: Stubenwaldallee 21a, 64625 Bensheim
Registergericht: Amtsgericht Darmstadt, HRB 25473
Geschäftsführer: Peter Steinhäuser, Christian Scheele
http://www.dd-wrt.com
email: s.gottschall@dd-wrt.com
Tel.: +496251-582650 / Fax: +496251-5826565

\
 
 \ /
  Last update: 2018-01-16 16:41    [W:0.186 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site